N O T E: I would like to state why I added the aluminum angle piece for using in a vise instead of the stainless steel part from All American Sharpener. Should have mentioned it in the video. I did not want to damage the SS part with the vise jaws. But more importantly I wanted a "softer" material that the jaws would "bite" into for a better hold. And having the longer length of the aluminum angle in the vise gave better stability as you can see in my video.

**Not to discredit the fine work done on this accessory, but we are getting a lot of questions about mounting the unit(s) in a vise. We want to make it clear that you can mount it in a vise using the mounting bracket that comes with the unit(s). To do this, you turn the bracket around so the bottom section that you will put in the vise will be pointing vertically downward. Because the bracket is angled at 45 degrees, the section that you attach the unit to will still be at the same angle. Hope this helps!** [Original comment] Thanks for the thorough review of all the features of our 5005! We are glad you like it, and we really appreciate your business and support. Nice work on your end as well. We hope it gives you years of sharp mower blades.

I like your easy to understand instruction review on the sharpener , and your customized bracket set up . Thank you.

What a neat tool. Thankyou for the great video. I will metal fabricate this tool for my personal use. Cheers from 🇦🇺

Awesome idea, saved me putting holes in my work bench!

This is not a cheap piece of junk. It is very well thought out, the man does an amazing job on these. I just received the Model 5005 about a week ago. This blade sharpening jig is worth every penny! Although I sharpen just 3 blades a week, This would be a great addition to any size operation.

All American should add this Vice Attachment with bolts as an accessory

I purchased their model 5000 that goes between 30•&15• Can’t say enough about how well it works for my Toro and Craftsman mowers. Honestly it’s probably the best option on the market for homeowners like myself and probably the pros as well.

GREAT DEMO!!!THANK YOU! I HAVE A JAW HORSE ALSO WITH RUBBER SO WE CAN TURN THE SS BRACKET AROUND WITH NO ADDITIONAL WORK!! THANKS TO ALL!!!!!!!!!!!

This is a Pretty , SHARP Tool! This vise is my new VICE if you know what I mean!

Depending on the price i would also be willing to buy the aluminum mount.

Great idea! Thanks!

Very good video thank you sir

Great tip my next purchase

Thank you mine will be here Monday was wondering if i can sharpen my tough cut blades, Little thicker

What size transfer punch did you use?

It looks like you backed out the bolts on the clamp, Or am i just seeing it wrong?

Great

I have the same grinder it’s been a dandy

So, you go to peoples houses and sharpen mower blades on the road ie, mobile mower man?

Excellent video. How much is the 5005 model? Thanks.

Maybe you tell more Cause plans are build one

Couldn't you just mount ot a 2x4? and then put that in the vise?

You are such an awesome craftsman and I am interested in purchasing one of your vise holders with hardware. Please allow me to contact you for more information. Thank you very much!!!

I simply watched the youtube video of All American's description stating how the bracket that comes with the tool mount already can simply be turned the other way in the vise. I appreciate your effort and please don't take this the wrong way, but you are reinventing the wheel sorry to say. There is no need to do what you are doing. Its redundant. If you are worried about marring the bracket in a vise...small pieces of wood stock or paint sticks would do that very easily and would hold way more than needed to hold his into place in a vise.

Hello, A very great idea. I'm also interested in purchasing this mounting vise bracket too. PM me

Good Video the KNOB to Tighten SHOULD have been MADE ALUMNIUM , Stainless or BRASS !!! not PLASTIC that Would have BEEN Icing on the Cake !!! 4 the Price Still Well Made

Hello, I live in Toledo, and wonder if you could make me a vise holder for my sharpener. Could I get a phone number or email. Your work is right up my alley, PERFECT!!I will pay what ever you need.