For anybody asking The Front end is tight. Ive double checked it a few times. The Gearbox has some play but that's about it. Ball joints and all tie rods are tight and good and well greased. I believe we have 1 possibly 2 issues. The Trac bar is at the proper angle which is achieved by a drop bracket but it is still a factory style Trac bar. One end has a bushing that has a little bit of play. Im gonna get rid of the bushing style and go with something else. Honestly the play is so little it's very hard to tell. It has never given us an issue before even cruising down the interstate at 80MPH. I think this was one of those perfect scenario moments. On top of that the truck has no front sway bar which lets the truck have a lot of torque roll off the line and when you let out of the throttle. These Issues will both be addressed before we take it back to the track!! Just glad it wasn't any worse... And for anybody telling me not to run the truck down the dragstrip because it's a big diesel and it shouldn't be raced.... Get that negative energy outta here!!!!!! If they will let me run it on a track you bet your ass I'm gonna try it!!! LOL

JH…. We need a JH/Justin vs Cleet/Squirrel junkyard build off and tug of war.

“Well, prolly gonna call it after that pass” 🤣 I bet

Death wobble is scary at 70 I couldn’t imagine at 125. I’d have to replace the seat lol

Ah, I haven't felt a good death wobble in years. Thanks for bringing me back. lmao

The famous second gen death wobble! I’ve been there but not at over 120mph! Lucky she held together with that excessive shaking. Good driving man you kept er straight

Chevy, with dodge power plant and ford death wobbles. You got all three.😂😂😂

Damn dude 11.20 not even cranked up is rolling. I love this truck

Did anyone else notice the rear sliding glass 😂😂😂 glad you got her to settle down it’s a nice truck!!

Death wobble is where the fun is 😂😂😂 (jeep on tons and 42s so "I know"!!)

That there my friend is a loose front suspension.. lol😂. Really like the content bud

Justin's Justin is literally the equivalent to Cletus's Squirrel. Such and awesome camera guy that adds so much energy to the videos!

lol that death wobble ain’t no joke when your doing 60+ mph 😂

The video sums it up....Take a square body and give it all the problems a Dodge has... transmissions problems, wiring issues and front end problems.

Add as much caster to the alignment as you can, ideally 7-12 degrees if possible. Done it many of times on all different gens of mopar straight axle vehicles!

JH has been killin the content lately!

Alignment! toe out slightly, and make sure you have a good amount of caster angle. Your trac bar is a definite possibility but a little toe out should help no matter what is causing it

Those death wobbles are no joke, always surprised they don’t just tear things apart.

I’m not sure how you have your lock up switch wired, but there is a way to wire the switch where it won’t lock the converter until the transmission is in 2nd or a higher gear. What that does is it allows you to stage in 1st gear, go ahead and flip the lockup switch, and then when you shift to second the converter will lock up automatically giving you once less switch to hit while you’re going down the track. That’s actually the most common way I’ve seen a dodge lock up switch wired, so yours may already be setup like that. Just something to consider trying. It would definitely be easier than trying to shift to second and flip the lockup switch all at the same time you’re going fast accelerating down the track.

Dude! That second pass you smoked that mustang right off the line!! I could here him thinking, "it's a fucking truck!!!"

that pop right before decel and death wobble was odd. that death wobble reminded me of my XJ years some 20 years ago lol

Bro you gotta go and finish the job now and smoke the raptor Cletus is DONE!!! 😂

That "Dogerrado" or "Silverdodgeo" or whatever you call it is one of my favorite KZfaq projects! Great job J&J!

I live about 2hrs away from Dave Goerend shop. Top notch guys to work with. Great video!!!

Congrats to the winner! Not going to lie super bummed I didn’t win it! My absolute favorite body style and they way you built it, it’s so freaking clean!

I absolutely love this truck and how it's turned out. Keep killin it guys!!!

It was awesome to meeting you on this night. My mother was just as excited to meet you too. Love the truck!!!

What a rigg! Absolutely unit!! Straight ripper!! OMG !! Let's keep it going man these guys are freaking dialed!!

The sliding rear window Jimmie had me rollin', that's one way to knock the dust out of the dash!!😂😂 Glad you held it together and stayed safe.

I'm real happy nothing serious happened. But your reaction had me in tears hahaha

Glad you're okay! The dukes of Justin

that tank slap.... erma gawd dude. glad u still kickin

Dude the Truck is so sick, awesome build!

JH is refreshingly honest

window tint too boys , man dream truck and engine wowww

We need to see Justin's reaction to the inside go pro footage of all that shake, rattle, and crazy finish to your pass lol ! Love the videos keep up the amazing project!

Congrats on an amazing FF500 win- wire to wire?!!!?! hell yeah, Diesel! have fun in that chopper

Id love to see a price sheet on this beast! Im in love with the build. I got an 84 k10 and dream of a build like this for it, realistically quite a bit more mild.

Caster. Add a bunch of positive caster. It'll be fine. Likely nothing is worn out or broken. The aftermarket always says it's this part or that part and want you to spend a bunch of $$ buying band aides. Look at an old dragster and notice how much positive caster they run - the front wheels look like they are going to flop over when they are turned tight in the pits. That's why. Harder to steer but super stable.

I had a death wobble like that coming over a bridge in a 97 ford f350 dually service truck. Ill never forget that

Add a Thuren track bar and replace your control arms . Most drag racers go to a heim joint on the control arms . Firepunk has them . Why a Goerend over a Suncoast converter?

Talk about sketchy, that was completely insane!

Death wobble at the racktrack is some scary sheet! Almost smoked a R35 GTR tho 😯

I love that truck!!! helluva ride on the second pass.!!

Let's go JH respect to you and Justin watching from England UK keep at it your crushing it

New AG1 commercial for cleet 😂 😂 Professionally shaken

JH and Justin, y'all rock! Congrats, Erica. I had a Jeep CJ-5 that done the death wobbles, had to jump out, and do some mud removal😂. Peace

It looked like the death wobble happened when you got out of it and once you let off it started dancing Man I bet those front wheels where going to town LOL! That was freaking nuts

Sounded like something broke or at least POPPED, after you got into high gear. I could hear it on both the cameras inside the truck. Glad you kept it in one piece.🤘🏻

Good driving keeping that truck under control at that speed

Ridin the lightning! Glad your ok brother

OH MAN i know that feeling! not getting there that fast but death wobble at 110mph made me change my under wear!

Bro that Death Wobble! Steering Dampers required lol. Reminded me of the good ole Jeep death wobble! Scary at high speed.

Wow great way to stay calm under a pretty bad circumstance . Awesome save

I have a Jeep TJ on 35's and experienced a death wobble at around 65. I sucked up the seat cushion. It was a loose control arm bolt. I went through everything and it is good now. I can't imagine a death wobble at 120mph. Holy hell! I was sweating watching that.

Damn, I rebuilt front ends multiple times for death wobble, ended up being an upper control arm bushing was smoked. Was one of the rebuildable xflex type ones. Good luck and hope this thing is fixed in a jiffy!

Love the content brother

honestly that was the best reaction for a giveaway call ive seen its funny she had no idea

Great video video Justin love ya work. Any other Volvo fans in here see the 240 wagon pass the drag strip at 33.50 haha

Glad your safe man

JHDiesel owes me a truck detail, cause I spit coffee all over my truck when that thing started death wobble…. 😂😂😂 I haven’t laughed that hard in a while, check you pants😂

I was in my 84 f150, not super fast by modern standards, but I had it wound out to about 130mph and the rear end started to sway , hit the sand at my local track, got lucky that time lol, turns out 3 of the leafs snapped on each side. rebuilding soon, glad everything turned out ok for you guys!

That was crazy, I’m glad your okay 🙏

With a death wobble at that speed I would have had to replace the seat from my ass biting a hole in it. WOW! That gave me white knuckle just watching it. Good driving!

The death wobble was bad, but what's more crazy is your big heavy truck beating that mustang. 😆

Love this style of video

Got to love that solid axle life. Lol

The only thing I wish is for JH to start putting his employees in his videos and help them build a channel just like Garrett did... Help other people and put them on just like Garrett did with you.. When he came up everybody he knew he put them on.

11 sec for a full size truck is really good plus it only on the first setting is awesome. That thing is a beast

Glad you and yhe truck are ok. Wish we could have seen Justin's(the Justin behind the camera) reaction to the footage.

I like that Bradenton lets you run sub 11.5 no cage. My duramax was asked to leave multiple tracks for 11.20s and escorted from English town after a 10.5

That death wobble is one hell of a ride man been there a few times. Nice save though.

IM SO HAPPY YOU WON!!!!! CONGRATS!! but dont forget to pay your $8,000 towing invoice.

Love the break in period

This truck takes me back to when I was a kid. It reminds me of the Fall Guys truck that has a TV series

Strait to the correct tune , then u will think your being launched into outer space!!!! Love your work, good job

This is usually when everyone starts talking about stabilizers. They only mask and compensate for the real problem. Often it’s worn or loose components but JH commented it’s been checked numerous times. Id say look into checking and changing caster.

I went with synergy’s track bar, I’m under your weight by 1000lbs but it’s pretty solid the bracket and bar are powdered

Vice grip garage makes brackets for the hood for square body’s that stops the folding. Be nice insurance to have even with the new hinges

I just noticed the speedo and tach aren't working. A fellow Michigander won the giveaway truck, congratulations

Dang that much vibration reminds me of the spacecraft coming back into earths atmosphere on the Hollywood movie screens.

I would suggest doing long arms on the front suspension as well as the track bar. I have a 2nd gen on 40s with no death wobble.

Man I felt that in Chicago!!

Vice Grip Garage get this man hooked up.

LMAO! DW for the win!! You need to add some caster into the front axle to help fend off death wobble.

Need to look into control arm drop brackets or a “long arm” setup to get those control arms a little less of a angle it’ll help the ride and ton

Ever think about Derick’s hood saver for the square body? Vice grip garage!

Top 5 favorite build on KZfaq 👌

carli adjustable track bar! it has Hiem joints instead of rubber bushings. also their ball joints. no more deathwobble😅

That thing is sweeeet!

Awesome truck. 👍

Dude that shake is so crazy to watch in slow motion.

Soo glad ur ok that could of been very bad

I watched it at the track very impressive expessilly for its first time out

Now that’s a shake down pass respect ❤🤘🏻👌🏻👊🏻🇬🇧

Nice truck I want to know when you’re giving this one away. Way to not freak out and lose control 😢

I too am a Death Wobble survivor.. 😂 If nothing else, what about your axle shaft u-joints? Those have been know to cause DW occasionally.

Guessing your at the limits of caster and those short arms in the front. Traction and power created the perfect storm for what could have been horrible. Nice work keeping it out of the wall

Those traction bars are going to make the axle wrap forward. You might want to look into a anti wrap bar instead it has a pivot point in front. I got the box sides with the tires on my lifted truck with traction bars on

The phone call was perfect. LOL