FlySKY i6 Throttle Elevator mix

No video

FlySKY i6 Throttle Elevator mix

Рет қаралды 19,969

Күн бұрын

FlySKY i6 Throttle Elevator mix - How to program a throttle elevator mix to reduce "pitch up" with increased throttle, using the FlySKY or Turnigy i6 radio and the Open or Phoenix 1400 motor glider.
Flysky FS-i6X 10 channel - bit.ly/39AkPdR
FlySky FS-i6 6 channel - bit.ly/2vFY49Y
Oken 1400 KIT (Phoenix 1400) - bit.ly/2TzmYms
SUBSCRIBE & CLICK 🛎
bit.ly/ANsubscribe
🎥 Video Recording Gear 🎤
Flying
Onboard camera Mobius C2 - bit.ly/2RLNLLg
Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
External Microphone - bit.ly/2S4VDqx
Studio
Wide view workbench camera - SJCAM M20 Action camera 1080P 30fps - bit.ly/2Wh5l8w
Close up workbench camera - Panasonic Lumix LX10 1080 30fps
Audio recording - Rode smartLav+ mic connected to iPhone - www.jbhifi.com...
Video Editing in Final Cut Pro X on 27" iMac
All the Action cameras I have reviewed - newtonairlines....
🔎 More information 🔍
Newton Airlines Uncut - / @newtonairlinesuncut
Newton Airlines blog - newtonairlines....
Andrew Newton KZfaq - / @andrewnewton
My portal - anewton.net
What HD cameras do I use - newtonairlines....
What FPV cameras do I use - newtonairlines....
What FPV gear do I use - newtonairlines...
Depron Armin Wing build - • Depron wing build
👌🏽Affiliate links 👌🏽
BANGGOOD RC - bit.ly/2R7LMgg
BANGGOOD Website - bit.ly/2OYahv4
⚠️ Disclaimer ⚠️
Some products reviewed on this channel are provided free of charge by the supplier. Some links in this description are affiliate links. If you use these links to make a purchase I may receive a commission, which helps to fund this channel, at no extra cost to you.
👀 Use your common sense, watch other reviews and shop around before making any purchase.
#AndrewNewton #flyskyi6 #mix #scratchbuild #RC #plane #airplane #slopesoarer #glider #underwater #review #depron #foamboard #hotwire #airfoil

Пікірлер: 54

@alasdair4161 5 жыл бұрын

The Flysky radio has some minor limitations, but is still amazingly flexible and probably still the best value radio out there. Thanks for posting.

@AndrewNewton 5 жыл бұрын

More mixes would be good

@alasdair4161 5 жыл бұрын

@@AndrewNewton And telemetry alarms for rssi..

@dustinhanlin 5 жыл бұрын

How awesome that you posted this. It was very recently, I pointed some folks toward your videos as the best FlySky tutorials on KZfaq.

@AndrewNewton 5 жыл бұрын

Thanks Dustin

@OlDarb94 3 жыл бұрын

Thanks

@jackjuhasz533 8 ай бұрын

Thanks, i'll try that !

@MatthewHeiskell 5 жыл бұрын

Thank you for sharing these helpful videos!

@AndrewNewton 5 жыл бұрын

No problem, I like doing them

@akhilpaul1754 2 жыл бұрын

Good tips

@peterfranzen3538 5 жыл бұрын

Good video mate very helpfull , I use the i6 and also the i6 x 10 channel so more of these i6 videos please.

@waleswideman1 4 жыл бұрын

Saved the day again

@etiennedaigurande3984 3 жыл бұрын

Thanks man 👍

@KenKneknaneek 5 жыл бұрын

Very nice now lets see how it works. Happy Flying

@steelydanfan100 5 жыл бұрын

Great timing, Andrew, I just maidened the Night Radian 2m yesterday , the nose pitched up under throttle big time, it was perfectly trimmed for gliding. This is a perfect glider, a much better floater than the Phoenix Evolution 1.6m I debuted a month ago. I would say the Radian is the better thermal glider hands down over the Phoenix Evolution. The Night Radian also has a better wing mount system and some of their fuselage and prop issues have been addressed. Very impressive, slow gliding.

@AndrewNewton 5 жыл бұрын

Yep nothing thermals like a Radian

@ukulelefatman 5 жыл бұрын

Very helpful. Your videos on the FSi6 radio have saved me lots of headache. I've noticed my Neutron going nose up with throttle...this is just the ticket. I'm starting a new glider build, trying to lighten the weight. I've cut the carbon/graphite shaft from an old golf club...makes a light and strong tapered boom !

@AndrewNewton 5 жыл бұрын

Perfect shaft, good luck with the new build

@socalives 5 жыл бұрын

Excellent , I will use this on my axn-floater but with up elevator. It has tendency to nose down on the launch. Thank You for the tip!

@patterdalebt 5 жыл бұрын

Thanks Andrew for another easy to follow instructional video. By the way your help installing the flight controller was a great success.

@AndrewNewton 5 жыл бұрын

Excellent Colin.

@NOXFPV 5 жыл бұрын

Thanks. Great idea.

@typxxilps 5 жыл бұрын

I learned a lot - again. Had just been trying to stay airborne without damage. Thanks

@AndrewNewton 5 жыл бұрын

Keep at it. One day the plane will do exactly what you want

@didactylos4diddy474 5 жыл бұрын

Useful especially for us plebes who use cheaper Tx's. Saves us from having to extrapolate from the instruction for Open TX systems :)

@AndrewNewton 5 жыл бұрын

Sweet. The ideas are the same but very different execution

@FeWolf 5 жыл бұрын

I have the TX, still handy radio, will see if I can do this with my tx6

@radioboys8986 5 жыл бұрын

Andrew, thank you

@AndrewNewton 5 жыл бұрын

No problem, I enjoy making these videos

@fpv_am 5 жыл бұрын

Wow, I think there are a lot of guys with chesper i6, so thanks for showing something for us!)

@waleswideman1 3 жыл бұрын

If we upgrade the firmware can we get more mixed channels. I need elivator with throttle. Flaperons and aleron mixing with rudder

@jackjuhasz533 8 ай бұрын

loved your videos for many years ! i'd like to limit my ailerons to up only, to reduce adverse yaw, is that possible ?

@AndrewNewton 8 ай бұрын

Separate aileron channels, and play with the output trim limits

@antonblebann6823 5 жыл бұрын

👍🏻❗

@julianhumphrey4843 5 жыл бұрын

Very helpful video, i wanted to do the same but elevator up and have it on a switch just for launch, but dont think i can put it on a switch with flsky

@AndrewNewton 5 жыл бұрын

If you have a spare channel you might be able to assign the switch to a channel then use the channel in a mix

@royd7984 3 жыл бұрын

Please explain how to setup an aileron - rudder mix. Thx

@AndrewNewton 3 жыл бұрын

Check my Mixing playlist

@royd7984 3 жыл бұрын

What is mix Offset?

@colddash5598 5 жыл бұрын

I’m on it.... after I get my plane out of the tree....so far 3-4 hours going back before dark to try at it again

@AndrewNewton 5 жыл бұрын

Oh dear!

@colddash5598 5 жыл бұрын

Oooo my hand n shoulder....but I finally roped it after it hung a day and a couple more hours work with the rope/water bottle

@fredcon8638 2 жыл бұрын

How do I connect this transmitter to a 6 channel plane I have it mostly figured out but I can’t get the part that’s makes the plane go up and down and turn to work it’s either I make the plane turn or go up and down seems only channel 1 and 2 work for that and I have a 6 channel hobby king bix 3

@AndrewNewton 2 жыл бұрын

Answers are in my FlySKY playlist

@CradyLab 5 жыл бұрын

Another handy tip, Andrew! 👍 Q: What mic are you using on your cap? The only decent mic I have at moment is a bulky Rode omni for my DSLR and I'm shopping for a good lavalier or similar. Cheers

@AndrewNewton 5 жыл бұрын

Just the Firefly external mic with this mod www.flickr.com/photos/pandasimages/46600466622/in/dateposted-public/

@CradyLab 5 жыл бұрын

@@AndrewNewton Thanks, Andrew. I am impressed that works so well. I think I may have a couple of those little mics laying around somewhere - never actually tried them

@sziluchannel 5 жыл бұрын

Hi i've got 2 questions. 1. I have the fs ia6b reciver, and can that handle analog and digital servos? Maybe the MG90S servo? 2. When you are using folding props than those prop blades can flap about 150 degrees foward and back, or it can't fold fowarder than they are in one straight? Thanks

@AndrewNewton 5 жыл бұрын

Hello. Yes both sorts of servos work will any radio. MG90S is my favourite cheap metal gear servo. Folding props swing out to 90º when spinning, and I don't know why they allow them to pivot further forward. Maybe so they can be used as pusher props?

@sziluchannel 5 жыл бұрын

I don't want to use as pusher prop, and i can they are swing out 90 degrees. I bought a folding prop and spinner for it from hobbyking, and after i assemblyed it the prop blades can fold foward a bit when it not spins. Is that problem? (i couldn't try out with spinning, but i not want to destroy my new motor)

@Jim-tj5lq 5 жыл бұрын

I bought this flysky i6 for a cheap 10 channel radio. I watch your video plus 6 other maybe more on what to download what data cable to buy and still can't get it to work, sure would like those other channels. Even got my old windows 7 out to see if that would work, NOPE. I don't know if you can help or not. E-mailed Flysky never heard back. I'm running Windows 10. It's to late to send this radio back, should of bought a 10 channel to begin with. Just thought you might want to know

@AndrewNewton 5 жыл бұрын

Sorry Jim. I have never upgraded.

@steelydanfan100 5 жыл бұрын

There are a bunch of You Tube videos showing hacks to upgrade these radios. I tried a couple of ways and was not successful. It is important to note that these are 3rd party hackers , NOT FlySky approved upgrades. For some reason Fly Sky never did these upgrades, even though the radio obviously has the potential.