Jon Boat Build on a Budget

Рет қаралды 19,618

Күн бұрын

Jon Boat Build on a Budget.
Champagne Taste & Beer $ Jon Boat Build
Full parts list:
EPOCH Battery-
www.epochbatteries.com/?rfsn=...
Aluminum tube- tbnation.net/products/1x2-rec...
Hydroturf decking- tbnation.net/products/hydro-t...
Graph mount- tbnation.net/products/heavy-d...
Countersink rivets- tbnation.net/products/rivets?...
Wiring kit- tbnation.net/products/weekend...
Bilge pump- amzn.to/4byurFT
Bilge Pump out bracket- tbnation.net/products/pump-ou...
Perko latch pull- amzn.to/3yjm4zk
Trolling motor plug- amzn.to/3y882ki
Check out the 6th Sense Fishing Bamboosa 5.3 here 👇
6thsensefishing.com/collectio...
Code BRIGADE saves you 10% off your entire order at 6thsensefishing.com
All my polarized sunglasses by
Waterland 👇
www.waterlandco.com/
Code BRIGADE saves you 15% off your entire order
Welcome to my take on a jon boat budget build! The goal is not to spend the least amount of money possible. We want to build the Jon boat with the basic essentials and some of the best materials at the smallest budget possible.
The 1436 aluminum jon boat got the total package from me! We began by welding in a full tube frame through the interior of the boat hull. The jon boat benches were slightly modified to accommodate two seat bases. Foam sub floor and a sheet aluminum cock pit floor was added. The framing features a floating deck extention off the back side of the meiddle bench and into the cockpit for added storage. I recycled two aluminum lids from a previous boat I gutted (the El DiabLOWE build) and integrated them into the project. The boat is decked out in .090 sheet aluminum throughout by using aluminum countersink rivets. The entire boat was rigged with a Tiny Boat Nation wiring kit featuring: 14 gauge wire, 16 gauge wire, terminal connectors, heat shrink, butt connectors, ring connectors, fuse box, switch panel, USB ports, voltmeter, trolling motor circuit breaker, and an accesory battery shut off switch. An Epoch batteries lithium battery, a Garmin fishfinder, and a Haswing trolling motor. Also added Led lighting throughout, a bilge pump, and wrapped some panels in vinyl. The entire interior was covered in Hydroturf. The jon boat build was simple and clean and came in at a reasonable cost for materials. Enjoy.
CHAPTERS:
0:00 Intro
1:39 The Project and Game Plan
3:37 The Build Step by Step
14:21 Owner Pick Up/ Reaction
15:13 Finished Boat
16:40 Cost Analysis
__________________________________________
FIND ME ON SOCIAL MEDIA-
Tik Tok-www.tiktok.com/@brigadeboats?...
Instagram: invitescon...
or adubjones
Facebook- / brigade-boats-10071137...

Пікірлер: 51

@marleymanfishing Ай бұрын

So sick! Loved being apart of the build dude! Adub is the man!

@AnthonyJonesBrigadeBoats Ай бұрын

Marley Man #1 rivet man 👊

@marleymanfishing Ай бұрын

@@AnthonyJonesBrigadeBoats exactly that!

@dave_ske2482 Ай бұрын

The videos are great and super helpful. I’m getting ready to do my tin boat mid year after our bass electric series finishes here in Australia and your clips have really helped me in how to go about it. Keep them coming!

@jakob4826 Ай бұрын

Thank you man! I remember commenting a while back about wanting to see videos like this and you delivered:)

@garrettschnabel7406 27 күн бұрын

Simple and clean. Turned out sick man. I really like that underneath open deck storage. Perfect for small cooler or backpack. Great idea!

@brianforaker1160 Ай бұрын

Looks great Anthony. As usual you are a real Craftsman. Keep up the great work brother

@AnthonyJonesBrigadeBoats Ай бұрын

Thanks, will do!

@jaredwoelmer2798 29 күн бұрын

Your videos always have the best content!

@AnthonyJonesBrigadeBoats 28 күн бұрын

I appreciate that!

@raenettwilliams5897 Ай бұрын

Great work. Loved the video guys!! The price was reasonable too.

@poepflater Ай бұрын

I'm autistic, but it is my superpower. small things count for me. I would drill out those rivets over the black background.. you get black anodized ones.... they are about $0.50 each in 100s though. My company used to build LEDs with rivets, We'd buy them by the 10 000s. I own more rivet guns than any one man should

@c.shoefish Ай бұрын

Looks great bro!

@garynoyes5043 17 күн бұрын

Loved it man

@BassBrothersFishingDMV 24 күн бұрын

Nice one🔥🔥🔥

@heavyd777 29 күн бұрын

Great build, Anthony! When are you going to take on a V-hull boat?

@AnthonyJonesBrigadeBoats 28 күн бұрын

Man, I have no idea at this rate. I definitely have none in the upcoming project list.

@randystevenson1264 Ай бұрын

Great video loved it what welder did u use on this build

@jeffsmith2872 Ай бұрын

Hey AJ - how long or hot do you heat the aluminum before welding? Thanks

@Cavanpikefishing 27 күн бұрын

Series boat Good Job cuz 🎣✌️❤️

@AnthonyJonesBrigadeBoats 27 күн бұрын

Thank cuz I appreciate it

@tylerroberts9486 15 күн бұрын

Hey Anthony! What welder are you using or if you could recommend an aluminium welder for me that would be awesome

@Toekneepowers 28 күн бұрын

Just found your channel. Pretty cool stuff.👍🏻

@AnthonyJonesBrigadeBoats 27 күн бұрын

Welcome aboard!

@Toekneepowers 27 күн бұрын

@@AnthonyJonesBrigadeBoats Thanks bud.

@grandtheftundead6634 28 күн бұрын

what dark grey sealant did you use that turned out mint

@AnthonyJonesBrigadeBoats 28 күн бұрын

It's Dynaflex. Search it. Available at Hone Depot/ Lowes. It's exterior sealant.

@KEPO843 29 күн бұрын

What would labor cost be for a build like this?

@koolcruiserful Ай бұрын

Looking good. What MIG welder do you have? Looks like a Titan from harbor freight.

@AnthonyJonesBrigadeBoats Ай бұрын

Titanium Unlimited 200

@carljohnson8364 Ай бұрын

Damnation! You are bad azz. All I can say is wish I was a close neighbor 😂🇺🇸⚓️

@stevenlocklear7711 Ай бұрын

#BudgetBanger🔥🔥🔥Keep slangin' cuzzin!

@markfialkowski4388 Ай бұрын

What a great built. Keep up the great job Love watching your videos

@jaydengilbert6639 24 күн бұрын

Can you do a video on building one the cheapest way possible?

@AnthonyJonesBrigadeBoats 23 күн бұрын

Yes iflike to do that one day! Probably not soon but I'd like to eventually try.

@markc2036 Ай бұрын

So was the $2142, including the labor? Thanks

@AnthonyJonesBrigadeBoats Ай бұрын

No. I added wording in the video stating it was materials only because I saw I didn't mention that.

@Axial32 Ай бұрын

One hell of a budget. 😂

@AnthonyJonesBrigadeBoats Ай бұрын

Budget compared to what I normally build. I've done boats with 20K just in parts, so 2K is Budget in comparison. I set the premise at the beginning. Best materials, lowest budget. Customer wanted tube framing, aluminum decking and hydroturf. That alone what 1500. For what was spent and what he got, it's a hell of a boat. But if you want to see me build something out of pallet wood, street signs, and home depot outdoor rugs, I could do that as well. But thanks to that clown ya'll put in office it will still cost 1,000$ minimum.

@Axial32 Ай бұрын

@@AnthonyJonesBrigadeBoats I understand. I wish I would have done the aluminum framing instead of wood. Seeing that alone made me think 💵💵💵

@parkourbryce1 29 күн бұрын

Balling on a big budget

@AnthonyJonesBrigadeBoats 29 күн бұрын

Well yeah, this guy wanted to spend about 1/4 of my normal material AND labor cost of what I usually build. So definitely a small budget for what I do here, but maybe large for the diy guy. I don't think 2k in materials is that bad in today's economy for quality parts.