Remember, what we show here is what you need to go learn, not a tutorial. If you do not posses the skills to perform at this level, do NOT attempt. Support us on Patreon: / anvil Music:
Пікірлер: 418
@marknovak82553 жыл бұрын
This was ReUploaded because the link on Bob's website was broken. Bob's site is rustblue.com in case you need that
@FailedRanger3 жыл бұрын
hi Mark just had a quick question for you. For Enfields of the Number 4 pattern(ie the mark 1,mark 1/2, and mark 2) what type of paint did they use for the coating over the bluing. Ive got a 1949 dated number 4 mark 1 and a number 4 mark 1/2 and Ive been curious if A). was the paint anything specific and B). was repainting lee Enfields a common thing for the armorers to do when the rifles needed to be serviced and C). It that type of finishing work something I could do.
@marknovak82553 жыл бұрын
@@FailedRanger I do not know about the paint, what it's made of. Really, no knowledge but I'm open to learn. A. I think the paint was a cheap way to protect the gun , used to cut costs as the Empire fell apart. My belief is these rifles were not in service long enough to be re-arsenaled, B. so a repaint may not have happened. C. Most who paint (cerokote, etc) fail to account for the fabulous gunsmithing time commitment involved, and wind up drowning. Do the research and visit some painters prior to investing money and time.
@felixthecat2653 жыл бұрын
@@marknovak8255 Guys.. the paint you want is SUNCORITE 259 don't know if you can source it your side of the Pond..!
@FailedRanger3 жыл бұрын
Mark Novak thank you I’ll look into it and will keep you posted
@Courier-Six3 жыл бұрын
Hey Mark, I just have a simple question. What did you guys use to affix the PVC pipe to the water pot? I think I heard it mentioned it was a toilet gasket or valve? I'm looking to rust blue my own Spanish Mauser 1916 after someone scrubbed the rifle clean of its markings and painted it and I hated the look of it.
@richardheaton64063 жыл бұрын
Wow nice job guy's i can remember my Dad redoing a lot of those of surplus guns back in the day when you got them out of drums at trade shows for $50 -$75 bucks he would work his job and on weekends go to a show buy a few of the different ones availible and for the next few weekends we spent time cleaning and repairing them then he would trade them or sale them and start over he always had a stack of hundred dollar bills in his wallet i do remember that those were the good old days miss that and my Dad but i do have the memories and a little knowledge on some of the repairs like you did today thanks for the video and for taking the time to allow us the next generation to see how your minds are working
@ikeizham2 жыл бұрын
That must of been awesome to be apart of.
@This_is_my_real_name2 жыл бұрын
@@ikeizham -- It must have been before 1968!
@automat92263 жыл бұрын
Thank you for continuing to reupload these. Very valuable, informative, and entertaining.
@charleskay23832 жыл бұрын
I'm a beginning gunsmith and want to focus on the restoration and repair of older weapons. This episode exactly shows what I want to do. Thanks, much guys, very informative.
@Je3perscre3pers2 жыл бұрын
Same. Millennial gunsmith. His stuff is great
@aardvark57302 жыл бұрын
Same
@mikehoncho67683 жыл бұрын
A year in gunsmithing school, to get a certifacate. But i have learned alot if not more from you mark. It is much appreciated.
@marknovak82553 жыл бұрын
The school experience did allowed you to get much more out of me than if you were not exposed to their curriculum. Just sayin.....
@mikehoncho67683 жыл бұрын
@@marknovak8255 you are correct, i would not know half the stuff you are talking about. But i still apreciate the in depth videos. Your amazing.
@joshuawhitten53312 жыл бұрын
I actually found Mark because SDI used one of his videos in a lesson. I love you guys, WE ARE THE CARBON BASED LIFEFORMS!
@sr20ser.3 жыл бұрын
I have to say that Bob is one helluva great guy to deal with. He was quick to answer my emails and give advice on what to use to restore an old H&R .32 revolver. I can't say enough nice things about the guy. And a huge thank you to Mark for having him on here, and giving a good demonstration to give me some confidence in learning a new process.
@ekscalybur3 жыл бұрын
I've been waiting for this to get reuploaded. Thanks Mark!
@cipherzero11153 жыл бұрын
Absolutely amazing job. I know I don't need to tell you that haha but I absolutely love how you bring these old guns back to life. I very much enjoy watching you, Mark and friends, work. 🤘🤘
@gerarddecosta1738 Жыл бұрын
I've watched a good number of Mark's videos. I totally enjoy them and have learned a number of things. I'm not interested in going down the rabbit hole myself. I just enjoy all of the projects. Thank you Mark
@shanek65823 жыл бұрын
Mark would make the coolest Bond villain ever
@seamasrigh2162 Жыл бұрын
Thing is this is no longer a $150 rifle. Prices are reflecting the world shortages of everything, plus the reality that these rifles are going away. Tucked into safes or under beds or bubba'd to death or neglected to the point of no return. This channel has made me re-think my maintenance routines on my milsurps. Today, a $600 bill to restore may be justifiable (how much would you put into a 65 Chevelle?) but that $600 job is now about $1000. What's it mean to you? I'm steaming, carding and caring - it's why I got them in the first place. Time to do some bluing. Thanks Mark and Bob.
@robertl61963 жыл бұрын
Ironically enough, this video drops today. I was out earlier this morning shooting my 1908 vintage Spanish Mauser. The long rifle version. What a gem. I suspect someone did a very good refurb on it at some point; it looks ten years old, not 112. Shoots like a champ, but the tiny sights are tough on my weak eyes.
@80spodcastchannel3 жыл бұрын
add on a sight base scope mount and shoot it with a mid range intermediate scope...kinda like the Jeff Cooper Scout rifle, no damage to the gun and helps old eyes see better LINK www.galatiinternational.com/1935-chilean-mauser-scout-mount-includes-rings-sk-scope-mounts.html
@ScottKenny19783 жыл бұрын
@@80spodcastchannel will second that.
@curiousentertainment30083 жыл бұрын
@@80spodcastchannel you watch mark too? Hell yeah.
@michaelrobbins66943 жыл бұрын
We have not forgotten! The reboots are just as awesome!
@TheInquisitiveCat3 жыл бұрын
I wish you had been on KZfaq about 30 years ago. I have learned more in a few hours than I have in my 78 years - great therapeutic value for me - thanks Mark!
@johnbrady12113 жыл бұрын
Well I'm just a young 66, but like you, I get great enjoyment from this channel. Nothing like watching the masters work.
@harrybattista143710 ай бұрын
Thank you Mark and your friend Bob for the great video of restoration.
@joenoffsinger63763 жыл бұрын
A real awesome video in so many ways. I wish I saw more of the glass repair but have seen another of your videos about that. Your rant was on target, I would add IMO that a mill surp in this condition is something easier to fall in love with than a NIB AR15. Loved hanging out with you guys!
@pacman101823 жыл бұрын
"say hi, bob" "hi, bob" "outstanding!"
@ZGryphon3 жыл бұрын
I've seen it in print before, but I think Mark is the only person I've ever heard actually use the word "chancre" in spoken conversation.
@emoryzakin25766 ай бұрын
Mark, I can't tell you how many times I've watched and rewatched these videos but I've got to thank you brother! Seriously!
@DesertrRat3 жыл бұрын
Thank you for the repost and the instructional. Now off to finish 60 years of deferred maintenance.
@johnmcmorris11703 жыл бұрын
This is great stuff! I have been collecting milsurps for about 20 years and taking the down to clean them for storage. You guys are helping me go to the next level. Thanks!
@carlpassarellirealtor26713 жыл бұрын
An absolutely wonderful job by two talented craftsmen!
@notchagrandpa88753 жыл бұрын
Now what this rifle needs is a light coat of oil and a home in Arizona, Nevada, or Colorado some place with relatively low humidity and in another 100 years it will still look as good as it does today. Great job on the restoration guys and I applaud you for intentionally leaving the battle scars intact instead of trying to turn an old rifle into a new rifle, people that attempt those types of restorations destroy the history of a military rifle in my opinion.
@itatane3 жыл бұрын
Love this video! This is something I have done to old tools as well. Rust bluing rates right up there with hand rubbed linseed oil finish for simple things that make such a difference.
@FrednDeeDee2 жыл бұрын
So I'm on the hunt for a former Martini/Henry that became a Martini/Enfield .303, because I want one to hunt deer with. Why else, you ask, because I saw the movie Zulu a bunch of times and I want one. I will be refurbishing the rifle myself because I want to. I will do all the care and preservation myself and being retired and caught all the way up to 2019 with the dang Honey Do Lists I have plenty of time to do so. After 54 years of punching a time clock I find that I can finally enjoy doing things I love to do for myself. With your videos, along with my own life experiences, I plan on hunting deer next year with an oldie but goodie Martini/Enfield from the late 1800s. Keep up the outstanding videos for us who love guns and love to tinker with them.
@fredford76423 жыл бұрын
Great video! Well worth the time to watch and learn. I look forward to taking the time to do this to the next war relic that I may find. Thank you!
@lstevens28343 жыл бұрын
Cannot thank you guys enough for showing this. I have a number of old surplus and sporting arms with poor to nonexistent finishes and now I can do something about it. I had an old Chinese export C96 that just looked awful, and now it looks great. A fair amount of work and somewhat tedious, but the results are amazing.
@joshuamasterson76773 жыл бұрын
Thank you for the your time and experience.
@murrayandru75273 жыл бұрын
Nothing Better than a Mark Novak Video !! Thank you for sharing , watching is EASY !
@sempervigilant58112 жыл бұрын
Thank you Mark watching this video have me the confidence and knowledge to refinish an old arisaka that the finish was almost completely worn off of
@ardenelenduil23343 жыл бұрын
Glorious satisfaction as always. Thanks for the re-upload Mark
@jamesheath93853 жыл бұрын
I learned so much. Many thanks to the both of you.
@atthebrink743 жыл бұрын
Thanks for the ReUpload. Best video on blueing. Super easy and Bob's formula is awesome!
@darthvader65339 ай бұрын
Ive never felt so immasculated as i did when i watched this monster determin an unknown chemical with his tongue
@patrickcolahan74992 жыл бұрын
Very cool. I have only seen people using very expensive equipment to do rust blueing. Thank you for sharing.
@kevinstafford94662 жыл бұрын
how did i not know about this channel? The quality and information is amazing.
@Gregory_Avila8 ай бұрын
Thank you for recording this information so its not easily lost.
@maringarcia953 жыл бұрын
Hmm here in Spain we blue rust with sosa and potasiun nitratre baths. Great video! Great gun😎
@GunFunZS3 жыл бұрын
This is probably my favorite of your tutorials. And yes it is. And it is a good one.
@chicowize3 жыл бұрын
Excellent work Mark 👍🏽
@rcairnut3 жыл бұрын
wow, chocked full of info!!! great restoration, I am jealous of the owner of that gun!
@ReadinessReviews3 жыл бұрын
Glad this one finally got put back up. Great info. I need to make one of those steam chambers.
@jeffprice64213 жыл бұрын
Beautiful work.
@RichardGoth8 ай бұрын
This is great! I got an 1893 carbine last year and this is almost step by step for me...
@greenbudkelly2820 Жыл бұрын
Half science, half art, half experience
@fmolds Жыл бұрын
Yogi Berra ligic !🤣
@greenbudkelly2820 Жыл бұрын
@@fmolds yeah, but only 10% of that
@JohnSmith-jh1iy Жыл бұрын
50% of the time, it works every time.
@davo9992 жыл бұрын
Awesome info....just did a blue job on a shotgun barrel that looks like crap. It was the STEELWOOL. I didnt degrease it!...Thanks for turning that light on!
@slipjointguy3 жыл бұрын
Been looking for this, thanks for uploading it again!
@tomthumb20573 жыл бұрын
outstanding you laid out a complete system for me/us to use... Thank you!
@Bayan19052 жыл бұрын
I've salvaged a couple rifles over the years that were being used as wallhangers. One was a really nice little Remington #4 rolling block in .22 LR. I got it really cheap because the action worked, but something was off. I took it apart, it turns out the spring had broken and someone had taken two other springs and mated them together into a functioning leaf spring. The gun worked, but had a trigger pull like that of the double action on a Nagant revolver. I took it apart, found the correct spring, got it working again, fixed where the takedown was a little sloppy because the hole in the wood was blown out a bit. Now my son shoots it regularly, we put only standard velocity through it, because that's what it used. I found a #6 Remington .22 LR, that was missing parts, got it going again, another fine little .22 LR to shoot. I'm working on getting my 1894 Winchester in .38-55 to function a little better. My latest is repairing a duffel cut on a numbers matching late war K98. I have a soft spot for these old guns that I can afford versus needing to take out a loan to buy a safe queen I am going to be afraid to shoot.
@mawilkinson19573 жыл бұрын
Another outstanding video. Thanks.
@kenlee61263 жыл бұрын
I had a Italian version of that...had been cut down an a Monte Carlo stock...most consistently accurate rifle loved it...i had to upgrade lol regret it...thanks for the video work u guys do a nice job on ur presentation
@fukcg00gle953 жыл бұрын
Interesting process. Thanks for sharing!
@ditto19583 жыл бұрын
Beautiful rifle and beautiful refinish job
@daverieck63523 жыл бұрын
very informative guys , great video
@marknovak82553 жыл бұрын
Glad it was helpful!
@jaydavis65943 жыл бұрын
I really enjoyed this video. Thanks for sharing.
@floydblack52823 жыл бұрын
Thank you for the great information.
@felixthecat2653 жыл бұрын
This absolutely works, although I have not been able to find the foam filled pipes that Bob uses this side of the pond.. I use plastic soil pipes, but they do bend and have to be replaced when the stack falls over! Much better than tanks of water, which will bring the rust faeries into your workshop from miles around..
@scootertrasher13693 жыл бұрын
Thanks for re-posting , I had the video saved for reference , but it went to private.
@melvindenny89622 жыл бұрын
Thank you for that. Informative, good baseline info for laymen. Now to work up the nerve, I'm old & made lots of errors, so.... see you on the other side. Again, gracias. Peace.
@marknielsen24822 жыл бұрын
Beautiful job. Looks good
@SeanPwnery3 жыл бұрын
Sweet extended repost! I'm actually getting ready to do this process this weekend - was debating on steam pipe vs boil.
@markserbu3 жыл бұрын
Good stuff!
@kemmccready41963 жыл бұрын
Thanks for reloading. I’ve missed not being able to refer back to this one.
@Sigmagnat6503 жыл бұрын
The repost YESSSSSSS. Thank you Mark!
@Jarhead643 жыл бұрын
Thanks for the reupload Mark! Two mad scientists at work! Wunderbar! By chance will you be reuploading your Q&A video? Absolute pleasure to listen to your wisdom and taking the time to educate us viewers!
@beefcakes272 жыл бұрын
Great job, guys.
@jeanniebuchholz99233 жыл бұрын
Out-freaking-standing!
@sgtslotter86343 жыл бұрын
Awesome video, thank you!
@daveclemons1225 Жыл бұрын
Great Video!! Thank you making it!
@Badhands552 жыл бұрын
Awesome tip about steel wool 👍🏼 blue collar 100% here
@thescatologistcopromancer39363 жыл бұрын
Now you have me thinking about rebluing the Mosin I restored...
@martinm34743 жыл бұрын
Just took a look at my Mossberg Model 43 .22lr and its action has fine Missouri rust growing on it. This is timely.
@joemiller93143 жыл бұрын
Outstanding!!!
@XxRumbleBeexX13 жыл бұрын
Thanks for the video....very good informative information
@LokiScarletWasHere2 ай бұрын
This is interesting. Saw this video after learning the hard way that boiling vinegar changes the process from rust corrosion to rust bluing. I don't restore guns, but I blue some steel things for fun on occasion, and now I'm curious if boiling salt and vinegar is a decent bluing method.
@Jason-iz6ob2 жыл бұрын
That’s crazy. I’ve watched this video a good 6 or 8 times now but never really paid attention to what kind of rifle it was. I just got a 1926 made model 1916 Spanish Mauser that I will eventually be doing this too, after a few other projects…
@prepareforadventure62472 жыл бұрын
Wow, looks great!
@mikemccollum45213 жыл бұрын
Very nice work.
@steveshoemaker63473 жыл бұрын
This has been outstanding to watch.....Thanks guy's...! PS l really liked you buffing wheel it not to fast....Just right...!
@levinlevinallday3 жыл бұрын
Very inspiring. As a plumber i do have one criticism. Cellular-core and common sch 40 pvc is the same thickness. Just wanted viewers to know because cellular-core pipe is usually only found at plumbing supply stores. It is cheaper but common pvc is fine to use.
@felixthecat2653 жыл бұрын
I find it bends...!
@DrawntoAdventure3 жыл бұрын
Absolutely loved this insight into what constituted an Arsenal refurbishment What a great history lesson! If you have an upper hand guard that is loose but otherwise undamaged, would you recommend acraglassing to avoid potential future damage (given that these pieces are thin and relatively fragile to begin with)? Thanks!
@kencullum76062 жыл бұрын
i almost lost an eye wftching that wire flopping while wheeeling
@jaimehectorcaballeroramire4150 Жыл бұрын
Thank you for passing down your knowledge now a days it's a very appreciated
@davefellhoelter134310 ай бұрын
AMEN!
@CrimeVid3 жыл бұрын
I should think the major cause of death of electricians is being stomped to death for turning up a fortnight late and saying “I can only do half a day today” !!
@marknovak82553 жыл бұрын
True
@pstewart54432 жыл бұрын
I would spend the money to keep a piece of history beautiful and in great shape.
@ryanknott75623 жыл бұрын
Say hi Bob. Hi Bob.
@flintrichards9453 жыл бұрын
That was a very interesting job I’d love to work on old military rifles just like that I wish there were more of them around and there are now thanks again for the great video.
@drakehammond278 ай бұрын
fantastic content. thank you for sharing. do you have any recommendations for books or reading about armory standard techniques either current or historic?
@mikewilliams49438 ай бұрын
Thank you
@campflyingdragon76283 жыл бұрын
For restorations, be sure to use steel wool around sharp edges as carding wheels and wire wheels can round sharp edges.
@8alonzo83 жыл бұрын
Thanks for this information. Subbed. I'm curious what happens inside the bore during the steam process? Besides standard bore cleaning, are you doing anything special to clean the bore?
@josephbolz45502 жыл бұрын
Great Video. Great job. Now I gotta go shop me up an old Mauser
@STLG8GT Жыл бұрын
Mark - thank you for creating this incredible content. (and Bob!) I've used the Mark Lee Express Blue product via boiling on revolvers and such, following Marks instructions. I've built a steam pipe to conserve a rifle barrel, although I am wondering... Is there a reason you can't use the steam pipe setup for rust bluing, versus the humidity box? Does it have to do with the comment about dry heat to warm up the metal? Too much moisture introduced immediately in the steam pipe - polka dots?
@cbroz74923 жыл бұрын
The late, lamented Samco used'ta be in Miami...went there a few times when I had my 03 license...bought stuff too...the day after the first great buying panic in Nov 08 I called to see if they still had the Jugo 7.62x39 they'd advertised...ordered a case, but then called back to see if we could drive down FROM WPB and pick it up...theyvsaid yes...we did and also bought a pile of loose packed .303 British ...
@bwatson80663 жыл бұрын
Awesome video guys. I'll definitely be grabbing some of that rust blue as I've been looking for an alternative to the selenium dioxide bluing chemicals that are so popular. Thanks!
@marknovak82553 жыл бұрын
Make the trip over to the dark side, you will not regret it
@noahculver89363 жыл бұрын
Awesome!
@hecanseeme82103 жыл бұрын
Great vid thank you.
@YerluvinunclePete3 жыл бұрын
I had a hell of a time getting a bottle of Bob's British blue shipped up to Canada but it was well worth the trouble.
@SamWhiskeyBigIron3 жыл бұрын
Thanks Mark. Ive been having some issues over her in the UK.
@finscreenname3 жыл бұрын
I've been known to put more into something then it's real worth. Mainly it's time like you did in this video Mark. If you had to go buy and set everything up from scratch it would cost way to much but when you have a shop full of stuff I bet you have almost nothing into that gun when it comes to money. Now I like to fix things but when it's your job.... time is a real issue.