Applying Wheel Coating: GTECHNIQ C5 Wheel Armour

No video

Applying Wheel Coating: GTECHNIQ C5 Wheel Armour

Рет қаралды 14,173

Shifted Perspective

Күн бұрын

Пікірлер: 36

@dimmacommunication 6 жыл бұрын

Tips : Use regular wheel cleaner before the iron remover ,maybe an acid wheel cleaner (removes baked iron much better than any iron remover). Then iron remover and maybe a claybar. The application of diluted IPA would be perfect.

@nismoo46 7 жыл бұрын

didn't know this stuff existed. Brilliant production on the video also so props for that.

@christopherkabel4420 7 жыл бұрын

Good video, I will strongly recommend you to use IPA/paint prepare product before applying a coating. It will remove make sure that the coating will stick better to the surface.

@ShiftedPerspective 7 жыл бұрын

+Christopher Kabel good call thanks

@BMWAddictE90 7 жыл бұрын

I've been looking for a reasonably priced wheel coating for my wheels. Good video 👍

@GoodDeal123 4 жыл бұрын

Nice video, just use some goggles when cleaning the hubs with the wire brush!! Safety squints won't do ;)

@antoniopappacoda5496 7 жыл бұрын

Awesome video like always man! I would recommend claying the wheel even after ironx it would make the rough sound of the application go away and maybe apply easier on the barrel of the wheels.

@ShiftedPerspective 7 жыл бұрын

+Antonio Pappacoda I guess I wasn't as thorough as I could've been! Next time. Thanks for watching!

@antoniopappacoda5496 7 жыл бұрын

+Brandon B of course man I hope to have a sweet beamer like you one day!

@antoniopappacoda5496 7 жыл бұрын

+Brandon B keep up the good work!

@dimmacommunication 6 жыл бұрын

Antonio Pappacoda Acid wheel cleaner ;) (if your wheel can treated with acid cleaners)

@Boodieman72 7 жыл бұрын

FYI its 30ml not 30oz

@btb1205e 7 жыл бұрын

Good videos Brandon. Quick tip on the wheels, sounds like you need some anti-sieze on the bolts. I also put some on the hub of the wheel. Makes it easier to remove after they've been on there a while. Lessons learned of the years ;)

@ShiftedPerspective 7 жыл бұрын

+btb1205e I think they were over torqued from the dealer. Since I cleaned them up, I'm not too worried since I don't drive it much in winter. I stay away from putting it on the bolts so it doesn't throw off torque spec. A good idea for my jeep hubs though!

@kyled4156 7 жыл бұрын

Love the video Brandon! Never have used that product, looks great thought.

@tskaNOLAN 7 жыл бұрын

Great vid. I'm a fan of coating wheels too.

@justinbuice 7 жыл бұрын

Gotta get the Akebono ceramic brake pads. Life changing

@ShiftedPerspective 7 жыл бұрын

+Justin Buice I'll look into it! 2017 is brake and rotor upgrade time.

@justinbuice 7 жыл бұрын

The pads were $135 for the set and they produce about 10% of the dust that the factory ones did

@dimmacommunication 6 жыл бұрын

Justin Buice How much $ are factory brake pads? do they squeak? How is the cold braking ?

@Joe_Friday 5 жыл бұрын

@@justinbuice How is the performance of said pads? My brakes on my Type R are really good but the dustnis horrendous.

@Rivek 7 жыл бұрын

Love the videos man, keep up the great work!

@Surfer911 7 жыл бұрын

Try claying the wheel before using IronX next time. It will get rid of all the little contaminants embedded in your wheel clear coat.

@malcolmbale9566 7 жыл бұрын

Don't need 2 coats, apparently nothing to be gained!!

@samknight6710 3 жыл бұрын

They say you can use a regular ceramic coating to put over the wheel armour coating as another layer

@gotrixiego1446 6 жыл бұрын

Gtecniq C5 or Gyeon Rim? Thanks

@thenotorious2031 7 жыл бұрын

Awesome! video bro(: have you try ammo Reflex on wheels?

@ShiftedPerspective 7 жыл бұрын

I haven't yet, but I'm sure I will!

@TheDanishMauro 7 жыл бұрын

What's the rims size? and the tire size?

@jc51373 6 жыл бұрын

not enough prep...You needed clay bar, polish and a IPA would have helped.

@Joe_Friday 5 жыл бұрын

What's an ipa?

@hyphenphotography 5 жыл бұрын

Deffo remove the hub caps before you start anything

@AaronMattheus 5 жыл бұрын

Why?

@milaskilathelab 6 жыл бұрын

American's always butcher the English language haha

@JayKay-ht8rg 6 жыл бұрын

WHEN UNDOING WHEEL LUGS, PULL UP INSTEAD OF PUSHING DOWN!!

@bodstrup 2 жыл бұрын

please please remove that extremely annoying background “music”. Have to adjudt volume constantly. interesting you had ironresidue even after a wash