ART Double Snapper ! Tree climbing friction saver retrieval device that everyone should own

Рет қаралды 18,439

Жыл бұрын

The Double Snapper 3 by ART is a phenomenal that makes for the best controlled retrieval of your friction saver. Once you own this device you will never get you friction saver and rope stuck on retrieval ever again. You will never smash you friction saver on the concrete again. Best of all, it only takes an extra 10 seconds out of your day to use.
00:00:27 Intro to the ART Double Snapper
00:01:13 Why would you want this device?
00:02:20 The only extra step
00:02:53 Tying the double snapper to your friction device
00:03:45 Check the size of the small ring with the retrival ball
00:04:18 Use the DMM XSRE to catch the retrival ball
00:04:40 Installing your rope through the Double Snapper on ring and ring friction saver
00:05:15 Retrieving your friction saver
00:07:45 Use it with the Petzl Eject
00:08:54 Use it with a Pulley saver
00:09:28 Installing from the ground
00:10:13 Recap of the Double Snapper and how it benefits you.
If you are looking for staff for your tree company, post your jobs on www.climbingarboristjobs.com
Purchase ClimbingArborist T-shirts through our store on our KZfaq channel.
#climbingarborist #Arborist #TreeWork

Пікірлер: 53

@TimberTrainer Жыл бұрын

Thanks for thoroughly explaining the functions of the Double Snapper. I rarely use a friction saver, but it's usually a good idea to use a throwline for retrieval of any climbing system. The same principle applies to SRT. It's better to take that one extra step and avoid all the issues you mentioned.

@ClimbingArborist Жыл бұрын

👍

@dlostyles2578 Жыл бұрын

Been watching you for probly a lil over 10yrs now & growing from my old skool ways from you providing simplicity of climbing techniques rilly preciate it Climb4Life

@ClimbingArborist Жыл бұрын

Awesome 🤙

@stikflip Жыл бұрын

Awesome video! I'll do something similar by just tying the throwline back on the rope, but in doing so, you end up using like 3x the throwline. I actually have a throwline stuck 80 feet up a fir that i had to cut to get my friction saver off and still need to go get haha. The fact that this facilitates 1:1 rope throw line on retrieval is awesome! Thanks for sharing!

@ClimbingArborist Жыл бұрын

That is the beauty of this compared with regular throwline retrieval. You actually have 4 legs of line when the throwline gets to the ground on regular retrieval and if it gets snagged it’s a nightmare

@stikflip Жыл бұрын

@@ClimbingArborist so much throw line. It invites problems haha

@JLMTreeService Жыл бұрын

Handy little do dad there! Art makes some good products for sure, all unique from everyone else

@ClimbingArborist Жыл бұрын

Always make a few products but they are always so well designed

@JLMTreeService Жыл бұрын

@@ClimbingArborist second that!!

@theatermusic87 Жыл бұрын

I used to use one, but then I started using the fimbl climb and the tear drop "rings" instead of traditional rings means I very very very very rarely (like once every other year) get it stuck on retrieval. And for me not having to break out the throwline at the end of the day was as much of a time savings. That said, the double snapper is a fantastically designed piece of kit

@paulghost4074 3 ай бұрын

I know I'm a bit late.....but just a heads up. The double snapper doesn't work with the regular Pulley Saver. Dan is using a Pinto Rig, the ART retrieval ball does not fit through the regular Pinto Pulley that comes with the Pulley Saver, but still appreciate the great video.

@ClimbingArborist 3 ай бұрын

👍

@dan_treeclimber5012 Жыл бұрын

awesome explanation worth a try thanks for sharing

@ClimbingArborist Жыл бұрын

Cheers bud, glad you enjoyed it

@kingslew1866 Жыл бұрын

Thanks! Great info, well done tutorial...

@ClimbingArborist Жыл бұрын

Glad you enjoyed it!

@nozemate Жыл бұрын

Hi, I got one: great piece of gear (even tried 3D printing but not as good enough). Another benefit: a throwline could be left for later on access to the tree, without expensive equipment left into the tree.

@ClimbingArborist Жыл бұрын

Awesome 👍

@havespurswillclimb Жыл бұрын

Enjoyed the video.

@ClimbingArborist Жыл бұрын

🤙

@utar88utar Жыл бұрын

good presentation. cheers

@ClimbingArborist Жыл бұрын

Thank you! Cheers!

@woodpeckerarborist Жыл бұрын

Like the video, very informative. Thanks Dan! I’ll stick with floating ring system. Simpler, less expensive, & never gets stuck.

@ClimbingArborist Жыл бұрын

Awesome 👍

@bryandoo34 6 ай бұрын

Stay awesome play safe

@skateboardist1686 7 ай бұрын

Dan holiday… cool name… Anyway, I’m brewing up some good questions about being an arborist so be prepared.

@yackomistses4390 Жыл бұрын

Pretty cool always wondered what that thing was for, also seems good on retrieval how you’ll get to utilize more of the throw line on the way down by the snapper just going over the union once.

@ClimbingArborist Жыл бұрын

Yes, you just need a throwline twice the length, not 4 times

@davidegagliardini7233 Жыл бұрын

Hi, very nice and interesting video. So with the eject is it possible to use it only in the open version without using the regulator?

@cornwallextreme Жыл бұрын

I use one on my rope guide. Mainly because it's expensive, plus I don't want to accidentally damage the thing, which I literally put my life in the hands of by slamming it into the ground every day. People always look confused when I use it at first, then think it's a brilliant idea when they see it in use

@ClimbingArborist Жыл бұрын

Yeah, I remember seeing my buddy use it years ago for the first time and I was like, “what they hell! How did that work?”

@billycrotty4102 Жыл бұрын

Should have Upgraded to a rope guide twin line, it makes this redundant as the rope guide can't fall out the tree when retrieving it and it has many other advantages as long as having a pre installed rescue line. I had the original rope guide which I some how managed to lose and the rope guide twinline is much better, it should have the snap anchor included for the price but once you buy this it does everything the role guide does and far more.

@alotl1kevegas860 Жыл бұрын

I was just looking at this on Bartlett! What are the chances lol

@hottalby Жыл бұрын

It's one of my biggest frustrations my saver getting snagged. I now retrieve it when I'm up, which does mean thinking ahead. Could you do the same thing with just tying the throw line onto the retrieval ball once through the spliced eye? Technically it could still come over the limb, but you'd have to pull all the throw line through, like a reverse remote set? Cheery from the Highlands keep safe.

@ClimbingArborist Жыл бұрын

You can retrieve like that but it takes creates 4 legs of throwline, it it gets snagged it can be a nightmare to get down. If it’s a clean path to the ground then it does work. This device just makes it much more simple and reliable.

@chrispratt5738 Жыл бұрын

Good work Dan. Are you using a Dmm Pinto Rig pulley with a custom prussik on your Rope guide, Rather then the stock green pinto ? Cheers

@ClimbingArborist Жыл бұрын

Hey Chris, yes that’s correct, it’s the Pinto Rig

@chrispratt5738 Жыл бұрын

@@ClimbingArborist cheers mate, Thanks for the reply

@VeteranTreeService Жыл бұрын

Climbing SRT I never use a friction saver. I'll DRT down if I'm just trimming, but it doesn't really tear up my rope. It'll last all year. Any use a saver and climb SRT?

@neild7971 Жыл бұрын

I use a ring cambium saver with the srt line knot blocked. Less friction retrieving, doesn't matter if you have weaved through branches on the descent. Also allows redirects to be removed by your groundie, which saves you trailing a tail to release them.

@stikflip Жыл бұрын

One awesome time for a friction saver in srt is if you plan to finish the climb with 1 or more natural fork redirects. Especially if you use a pulley and ring, the retrieval is smooter than any fairlead pulley. But even ring and ring its sweet. Just jam a backed up butterfly on the small ring, make sure the retrieval side isnt deflected, and youre golden.

@fredo3161 4 ай бұрын

Is that only available in the UK?

@ClimbingArborist 4 ай бұрын

I believe you could order this any where that sells ART stuff

@billycrotty4102 Жыл бұрын

Or.... You could just buy an ART twinline rope guide even if you are an SRT fan boy. I would say I'm never going to get them 12 minutes of my life back but I'll be honest owning a rope guide I kind of could see it wasn't going to be any benefit given you never smash your friction saver on the ground anyway and if you're a SRT fan boy you'd have the advantage of having a pre installed rescue line set using the the twinline rope guide, if you're as geeky as most the people interested in stuff like that I'm guessing you buy every bit of kit under the sun and consider the trade as a hobby so, I'd imagine the price of the twinline rope won't be that daunting ?

@miguelestebangaillour4576 Жыл бұрын

Why not just tie the throwline next to the Big ring? And use the retrieval ball like always? Indeed i don use those balls, just a granny knot... I think si redundant hardware. And i speak horrible English haha. Thanks for sharing

@ClimbingArborist Жыл бұрын

You can do that, just means you climb and work the tree with a throwline hanging in the tree which can get in the way and get tangled around branches you remove etc… This just removes that factor

@miguelestebangaillour4576 Жыл бұрын

@@ClimbingArborist Man!! Now i understand how it's works!! Really Nice! Thanks!!!