Artillery GENIUS PRO vs GENIUS - All The Differences

Рет қаралды 14,102

Күн бұрын

Hi guys 😀
Artillery just released the new Genius Pro 3D printer.
This new model is an improved version of the first Genius from 2019.
So, in this video, we will go through all the differences between the 2 models.
For all the details please check the video and don´t forget to give it a like👍😉
♦♦♦ You can find these printers here⤵
pt.banggood.com/custlink/G3vY...
pt.banggood.com/custlink/3vGy...
pt.banggood.com/custlink/GKvy...
www.artillery3d.com/collectio...
♦♦♦ GENIUS (3D Printer) - Assembly & First Tests⤵
• Artillery Evnovo GENIU...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Artillery Hornet
pt.banggood.com/custlink/mmDd...
♦ Ender 3 V2
pt.banggood.com/custlink/DmDK...
♦ Creality Ender 3
pt.banggood.com/custlink/mmmG...
♦ Creality Ender 3 Pro
pt.banggood.com/custlink/m3D3...
♦ Creality Ender 5
pt.banggood.com/custlink/D3GE...
♦ Creality Ender 5 Pro
pt.banggood.com/custlink/mGGy...
♦ Creality Ender 5 Plus
pt.banggood.com/custlink/G3DE...
♦ Creality Ender 3 Max
pt.banggood.com/custlink/mvKy...
♦ SKR Mini V2.0:
pt.banggood.com/custlink/vKGY...
♦ Tevo/Homers Tarantula Pro
pt.banggood.com/custlink/3DGm...
♦ Tevo/Homers Tornado
pt.banggood.com/custlink/vmGK...
Thank you so much for your support :)
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by KZfaq Library:
Soft Knives - SefChol
#GeniusPro #ArtilleryGenius #3DPrinting

Пікірлер: 22

@avejst 2 жыл бұрын

Good improvements Thanks for sharing your experiences with all of us :-)

@iskandartaib 2 жыл бұрын

A little sad - a year or two ago a lot of the in-country 3D printing shops were selling the Sidewinder and the Genius. Now only two or three of them are selling the Sidewinder X2, and no one is selling the Genius. They've been supplanted by the Bluer, the Sapphire, etc. (And most also sell Creality products.) I plan on getting a X2, I don't see the point of buying a Genius since I already have a smaller printer (a Wanhao i3 Plus). Now with the X2 out I hope more of them will start selling Artillery printers again.

@Jeff.55649 2 жыл бұрын

Do they use the same idler arm? I want to upgrade my Pro to metal idler arm!

@SteveInScotland 2 жыл бұрын

You’ve made an error. Yes, the power supply is switchable between 110v and 220v but that power supply provides power to everything except the bed, it’s powered directly from the mains voltage via a relay. So a 220v bed in a 110v country will heat but very slowly but a 110v bed in a 220v country will go bang as the voltage is twice the rated voltage of the bed, bye bye bed!

@massimookissed1023 7 ай бұрын

If the bed has two heating element circuits in it, they could be switched either in parallel for 110v or in series for 220v. That's usually how those voltage selector switches are wired to operate.

@420247paul 2 жыл бұрын

More Sandra raptor please.

@creativ01 2 жыл бұрын

So they just fixed problems which shouldn't be there from beginning, and which most of the owners already fixed. I dont see any added value, also add leveling probe is easy on Genius, because pins for it are already there on extruder board.

@CraftyCrafty Жыл бұрын

Did you know that if you run the BL touch on your genius you can direct swap, the head with the Genius pro head with only having to change 1 screw on the mounting plate, and it will run and print as normal? save you by buying just the BL touch.

@j.4941 Жыл бұрын

Hi, may I ask something here? You mention that the Genius PRO heads are compatible to the old Genuis printers... I have a Genius and need to replace various oarts of my Extruder. I do NOT currently have a BLTouch, but I'd like to add one. So: what would you advise? If I understand correctly, I will in any case have to flash the firmware. That said, does it make sense and is it compatible to just buy a complete Genius pro extruder incl a touch sensor (~75EUR) or to buy various spare parts (~30 EUR) plus the touch (25 EUR)? On one hand it's a bit cheaper, but since I have my printer ripped open right now I can't print the parts required to mount the BLTouch anyway, so I could just as well buy the whole thing and be done with it... Are the heads really totally compatible? Thanks for your help!

@franckchaberlot9165 2 жыл бұрын

Très bonne vidéo . Ma Genius fonctionne à merveille depuis plus d'un an sans autre modification que le levier d'extrusion métallique et un heatbreak bi-métal qui m'a supprimé l'usure du PTFE car plus court de 16mm . Je pense que la Pro aurait dû être équipé du levier métallique .

@fofocho71 Жыл бұрын

Learn English!

@JoesAutoElectric Жыл бұрын

At 5:13, you are incorrect, at least on some machines. I just gota Genius Pro today, and those screws are no longer there for adjustment. It is a stupid design unfortunately.

@ruiraptor Жыл бұрын

Not incorrect. The set screws that we have on our printer and that we show in the video are there to adjust the amount of pressure.

@JoesAutoElectric Жыл бұрын

@@ruiraptor right, except they do not exist on my genius pro. Read my comment again

@MarsAttack23 Жыл бұрын

Same for me

@markusmaeder1388 2 жыл бұрын

Leveling screws and springs in 2021? Why yet another printer? Artillery made nice decisions on their Anycubic Vyper: dual independent z axis with two endstops and a fixed bed without need to level. Direct drive for the Vyper as an option and improving firmware IMHO would be a better solution for customers than yet another printer.

@dondo8661 2 жыл бұрын

Artillery and Anycubic are separate companies though

@AndrewAHayes 2 жыл бұрын

I have 6 Chinese printers 4 Creality and 2 Voxelab, the Voxelabs are pretty good for the price but the Creality machines are a constant pain in the arse, I will not buy any more Chinese printers, I built a Pro 3D V-King 400 from the best available quality parts and its a winner, I havent had to do anything for months to it. My next purchase will be the Prusa XL when it is released, Prusa take their time with their designs and only release when it is perfect, since they anounced the XL machine Creality have released six FDM printers and all of them crap, they cant even get the BL Touch firmware correct

@iskandartaib 2 жыл бұрын

Levelling screws are good for tramming the bed and the printer. You do want a square printer, right?

@MarkusFotofieber 2 жыл бұрын

@@iskandartaib a good construction doesn‘t need tramming. Good examples are Prusa i3mk3 and Anycubic Vyper.

@iskandartaib 2 жыл бұрын

@@MarkusFotofieber The former I'd believe, they tram it before it leaves the factory, or they make sure the parts fit together only in a way that can be square. For the price you pay, it'd better be square. The latter? Maybe.. but I'd have to confirm it myself.