Рет қаралды 7,739
Artillery Genius with BL Touch and new TFT Firmware
No more bed leveling on the Artillery Genius?
Replace print surfaces at will, without re-leveling the bed?
Artillery Genius with BL Touch and new TFT Firmware
Printing at different temperatures without re-leveling?
No problem - with the Genius BL Touch Mod!
The Genius is already prepared for the installation of a BL Touch Sensor and can be easily upgraded with a new firmware.
But which firmware is the right one? I looked at some alternatives and tested two of them.
Which firmware, from my point of view, is the best - you will learn in this video.
I also show you how exactly the installation and setup works until the first print with BL Touch.
Make sure, to dont forget, to put G29 after G28 in your slicers start code, to enable BL Touch bed leveling.
When compiling, the Nozzel/BL Touch XY Offset may need to be considered/coordinated. You can do this in the configuration.h in line 783 + 784, the definition explanation can be found in the lines 795-782.
▬▬▬
Links
Visual Code code.visualstudio.com/download
Fan Duct www.thingiverse.com/thing:397...
Slider für BL Touch www.thingiverse.com/thing:460...
Genius Firmware Open Source github.com/jonathan-schmieg/g...
Genius TFT Firmware Open Source github.com/kind3r/genius-tft-...
▬▬▬▬
My favority printers*
Recommended from (entry level**) ✳️1 Beginner to ✳️6 Professional
☑️ great entry-level printer with ABL und direct Extruder ✳️1
🛒 Artillery Genius Pro 🇪🇺 www.geekbuying.com/go/67mPgeVN
🛒 Artillery Genius Pro 🇩🇪 amzn.to/3kkWW1g
☑️ middle size Entry-level printer with pressure sensor leveling ✳️1.5-2
🛒 Anycubic Viper 🇪🇺 www.geekbuying.com/go/67mr0x2x
🛒 Anycubic Viper 🇩🇪 amzn.to/3I0DHUW
☑️ Dual Extruder ✳️2
🛒 Sovol SV02 Dual Extruder 🇩🇪 amzn.to/3wHJc4K
🛒 Sovol SV02 Dual Extruder 🇨🇳 s.click.aliexpress.com/e/_AFWghO
☑️ very big 3D printer with direct Extruderr ✳️2
🛒 Sovol SV03 🇩🇪 amzn.to/3d4lYPF
🛒 Sovol SV03 🇨🇳 s.click.aliexpress.com/e/_AlYZEM
☑️ big 3D Drucker with direct Extruder ✳️2
🛒 Artillery Sidewinder X2 🇪🇺 www.geekbuying.com/go/67mTl6D6
🛒 Artillery Sidewinder X2 🇩🇪 amzn.to/3H73qLe
☑️ Core XY ✳️3
🛒 Ender 5 🇪🇺 www.geekbuying.com/go/67mTs1UX
🛒 Ender 5 🇩🇪 amzn.to/2OzIaHj
🛒 Ender 5 🇨🇳 s.click.aliexpress.com/e/_987I1Q
☑️ Idex printer with dual printing system (2 extruders, 2 print heads) ✳️4-5
🛒 Weedo X40 🇩🇪 amzn.to/3BWR6J
** By the (subjective) barrier to entry, I mean how easy it is to assemble the printer and get
and get the first decent results.
▬▬▬
You like to support this youtube channel?
☕ Buy me a coffee ;-) paypal.me/ThorstenDanner ☕
**❤️Thanks to all, which supported the channel already❤️**
▬▬▬▬
If you copy anything in this video, you do so at your own risk - no liability.
+++Advertising+++
The video as well as the description contain unpaid advertising.
*For product links, I use affiliate links and receive when buying through such a link a small commission that comes to the channel to good.
You pay when buying through such a link, no increased price.
I was not paid by a company. The products were bought with my own money.
#Artillerygenius #bltouch