Artillery SWX1 Printed Upgrades

Рет қаралды 14,943

5 жыл бұрын

Here is my must have list of printed upgrades for the Artillery Sidewinder X1 Thanks to all the folks that put up their files so this printer can be modded and more user friendly! Please give those makers a like if you use their files.
LINKS:
Cable strain Relief
www.thingiverse.com/thing:351... By: AJCROSS
Leveling Knobs
www.thingiverse.com/thing:351... By: AJCROSS
End Caps & blower fan
www.thingiverse.com/thing:350... BY: PhantomGT
Top USB Bezel side case USB Bezel
/ 370246523600019 By: Ricky Estrada
/ x1_usb_bezel.stl
USB Cap By: Sgt.Taz
www.thingiverse.com/thing:369...
Ribbon cable strap
/ 353026941988644 By: Michael Olszewski
Artillery Case fan Grille By: Sgt.Taz
www.thingiverse.com/thing:366...
40mm fan guard for 4010 blower fan By: Sgt.Taz
www.thingiverse.com/thing:363...
Bed handle (4 versions) By: Sgt.Taz
www.thingiverse.com/thing:365...
TfT/LCD touchscreen cover By: Sgt.Taz
www.thingiverse.com/thing:362...
Filament Rollers By: Stonecold774
www.thingiverse.com/thing:373...
Sidewinder X1 Filament Sensor Bracket by KenR
www.thingiverse.com/thing:3653455
Complete extruder cover and fan relocation By:Joel Nicklasson
/ 382789535679051 or www.thingiverse.com/thing:383...
V-Slot Channel Covers
www.thingiverse.com/thing:832077

Пікірлер: 64

@MajesticSmokinElvis 4 жыл бұрын

Liked the video. Appreciate the quite, calm presentation. I remixed your cool USB cover on thingiverse and was jazzed to “meet the maker” so to speak. Subscribed and keep ‘em coming.

@Sgt.Taz3D 4 жыл бұрын

Thanks! I made my USB a bit shallow as I rarely use it but figured it's a basis for someone to modify :)

@kamron4825 3 жыл бұрын

Thank you for making this! I've searched through many videos to find this gem

@Sgt.Taz3D 3 жыл бұрын

Thanks!

@MCsCreations 4 жыл бұрын

Hey, dude. Just liked and subscribed. 😊 Great upgrades! Thanks! I guess I'm going to buy this 3d printer! 😃

@Sgt.Taz3D 4 жыл бұрын

Thanks for the like & Sub! I enjoy using this printer myself and it gets more use than the Ender 3 Pros I have. There is a ton of information on FB if you have immediate questions as well as a group on thingiverse. Main thing is take your time in assembly and make sure the ribbon cables are seated correctly. My 2 have to locking connections but the newest ones don't. there is a strain relief that I would use if I purchased a newer model to avoid that issue.

@peteronlinenieuwsblog813 4 жыл бұрын

Such a great lot of tips and tricks ! Thanks for that.

@ChrisBossu 4 жыл бұрын

I really like this updates, today arrived my new X1 and I'm having some problems of configuration but I'm working on and I hope solve all soon ^^

@Sgt.Taz3D 4 жыл бұрын

If you can check out the facebook group-a lot of helpful folks there that can help you sort out issues. Thanks! facebook.com/groups/artilleryswx1

@baddogx69 3 жыл бұрын

Buddy is baked as hell lol. I loved the vid man! Thanks for the info. I will be printing a lot of this stuff!

@raidenmaurice3552 3 жыл бұрын

You prolly dont give a shit but if you guys are stoned like me atm you can watch pretty much all the latest series on Instaflixxer. Been streaming with my girlfriend for the last days :)

@leoneljudah7467 3 жыл бұрын

@Raiden Maurice Yup, I have been watching on instaflixxer for since december myself :D

@ginopoe9150 4 жыл бұрын

Awesome well thought through! Thank you for all the links. One thing would love to have is the trim piece around the bed to cover up the foaming foil, if it was in blue like the rest of your parts, would look slick.

@Sgt.Taz3D 4 жыл бұрын

I've been thinking of using some aluminum tape to clean up those edges -thanks :)

@joshuaharrison4596 3 жыл бұрын

Great video. Thank you!

@swedishvaperuk7112 5 жыл бұрын

great vid!

@saxman454 4 жыл бұрын

Love this video of upgrades. Liked and subscribed to your channel. Keep the good vids coming. One question, what orientation did you print the Complete Extruder cover fan relocation? supports also i assume?

@brammacdesignsmedia5973 3 жыл бұрын

that issue started when i just put it together and found out the ffc cable for x axis. i pushed it in until i heard or felt a click and that solved my issue.

@naseebramlakhan3906 4 жыл бұрын

you should have more like. Great vidéo m8. Thanks you for sharing. merci

@Sgt.Taz3D 4 жыл бұрын

Thanks!

@rhystheodore4903 5 жыл бұрын

Nice work. There are a couple here I knew about but have overlooked, so i'm going to add those to my printer next up. You mentioned printing channels for the extrusions to keep gunk out, but I don't see a link for those. I tried searching thingiverse, but couldn't find anything. And there is only so deep you can go into the thingiverse before your head starts to hurt. I was thinking of just running some tape along the open extrusions temporarily, but I suspect that could randomly come unstuck and could get caught in moving parts... Cheers for the video! I look forward to a follow up if you add any new additions, or start upgrading hardware.

@Sgt.Taz3D 5 жыл бұрын

sorry must have missed that in my pasting the links this is the file I used, just enlarged the length www.thingiverse.com/thing:832077

@VIPER35GP 4 жыл бұрын

Hi, great list, I was thinking about printing that extruder fan and cover, did you use supports when you printed it? Didn’t mention either way on thingaverse. Also did you print it with the logo face down? Thanks!

@Sgt.Taz3D 4 жыл бұрын

Yes used supports (everywhere) Face down . this will add support for the mount holes nicely.

@FuriousImp 3 жыл бұрын

Would have been such a lovely upgrade to do today, but gosh darn it, I will have to extend the wire. Need to cut it and solder it. Mine is too short, SW-X1 V4... also, the fan duct on my stock 4020 fan, has been glued to the fan shroud for some reason (only on one corner). I had to break the plastic to get the shroud cover off.

@Sgt.Taz3D 3 жыл бұрын

next time use a bit of IPA to remove the glue. I know day late dollar short ;) The fans wires have gotten shorter. but I replaced them with winsinn ones after awhile anyway. they have longer wires and I buy them in bulk for spares.

@FuriousImp 3 жыл бұрын

@@Sgt.Taz3DThanks for the tip, but it wouldn't have mattered, as it was glued on the inside. Could have dissolved it. Winsinn? Care to share a link?

@Sgt.Taz3D 3 жыл бұрын

@@FuriousImp Hotend: rb.gy/twjryh Blower: rb.gy/twjryh (non affiliate links :) )

@FuriousImp 3 жыл бұрын

@@Sgt.Taz3D Both currently unavailable. 🤣 Thanks though

@BuddhaBytes15 4 жыл бұрын

Can you please do a follow up? How is the X1 going? Also, any further mods regarding the X1 - there still seems to be a lot of interest! Cheers - subbed!

@Sgt.Taz3D 4 жыл бұрын

I have a V1 & V2 so I will try to get some more updated links and prints. Hoping to upgrade the bed and get a few more videos up. just limited on funding at times :)

@rentaroo 3 жыл бұрын

What filament color are you using? I'm trying to find the color that matches the Sidewinder. Thanks

@Sgt.Taz3D 3 жыл бұрын

Closest I've gotten to the color is Ttyt3D Turquoise silk

@STIZEN9 4 жыл бұрын

sorry if Im not seeing it, but what about the common idler arm print? I heard this is one of the first prints to do since its going to snap. Thanks

@SgtTaz 4 жыл бұрын

Well this video was made way before that issue ever popped up. it should be fixed on the newest additions but here is a link for one just in case www.thingiverse.com/thing:4063458

@TheAndre2291 4 жыл бұрын

The Facebook link for that "Complete extruder cover and fan relocation By:Joel Nicklasson" not working. Where can i find that file?

@Sgt.Taz3D 4 жыл бұрын

*Update: Joel Nicklasson allowed me to post it to thingiverse for anyone that is interested. www.thingiverse.com/thing:3834835

@TheAndre2291 4 жыл бұрын

@@Sgt.Taz3D thanks!

@ginopoe9150 4 жыл бұрын

And a chamfer trim piece around the LCD touch screen in blue. Boom!

@Sgt.Taz3D 4 жыл бұрын

Here is the tft bezel www.thingiverse.com/thing:3722447

@ginopoe9150 4 жыл бұрын

Thank you!!

@moltar512 3 жыл бұрын

like and subscribed, huzzah artillery3d discord!

@shodprism1571 4 жыл бұрын

How do you get your PC to read the sidewinder through USB?

@Sgt.Taz3D 4 жыл бұрын

Using right side USB-B printer port.(blue cable came in spares bag) If your having trouble connecting update your USB drivers to CH340 and turn off power saving/ screensaver features. Also baud rate is 250000

@shodprism1571 4 жыл бұрын

@@Sgt.Taz3D It worked! Thanks! Just had to update the COM6 driver under device manager. Been running this thing non stop since I got it a week ago. Your other up grades have been a big help. Thanks!

@dooley9621 3 жыл бұрын

Thanks for the video mate, should move away from the camera a bit though.

@CraftyCrafty 4 жыл бұрын

Just subbed today buddy top channel, do you by chance know where to download firmware for genius v4 bltouch v3. Keep up top vids

@Sgt.Taz3D 4 жыл бұрын

best info on the source is the guy who pretty much set the standard pretendprusa.co.uk/index.php?action=downloads;sa=view;down=15

@CraftyCrafty 4 жыл бұрын

Top man thank you

@tackleboxtats 4 жыл бұрын

What slicer are you using

@Sgt.Taz3D 4 жыл бұрын

Cura with this setup: 3d-nexus.com/resources/file-archives/download/8-artillery-evnovo/32-3dn-artillery-swx1-and-genius-cura-4-6-1-machines-and-profiles-installation-package

@OfficialNetDevil 4 жыл бұрын

There any way we could connect on Facebook?

@Sgt.Taz3D 4 жыл бұрын

facebook.com/SgtTaz

@OfficialNetDevil 4 жыл бұрын

3D Printing Addiction appreciated, sent ya a pm

@jamesb4242 4 жыл бұрын

mains voltage is small potatoes, real men touch 277-480v with their bear hands!!! eff the strain relief! ;)

@Sgt.Taz3D 4 жыл бұрын

Just had a few post in FB today where the wires got broken over time even with the relief. I wound up adding a cable chain and mounting to rear hole of case. or you could add some PTFE tubing inside the wrap to keep it from getting pulled. Set a few people back with having min temp errors from the wires being broken . but safety 3rd I always say ;)

@jamesb4242 4 жыл бұрын

@@Sgt.Taz3D haha that's right! Just got my sw-x1 the other day and I'm taking it apart to replace the electronics with skr and tft35.. any tips with the firmware part? Doing the research on all that now, I've flashed marlin for my other printers before but never fof a brand new board

@Sgt.Taz3D 4 жыл бұрын

@@jamesb4242 pretty standard. I cover similar code in my latest video-inadvertently mix some of the skr stuff at the end of the marlin info. Haven't found a great solution for the stock LEDs as the aux is taken up by the LCD inputs. If you get stuck let me know :)

@jamesb4242 4 жыл бұрын

@@Sgt.Taz3D thanks! I got everything working including BLTouch advanced pause linear advance, all my creature comfort features I love in marlin. Only thing is with the tmc2208's the x and y motors run beautifully and silent but the dual z's make this horrible knocking sound that only goes away a little when I lower the current as low as it goes :( I'm wracking my brain trying to figure this out playing with settings. Did u use the same drivers when you put the skr 1.3 in? Any chance I can compare your configuration.h and configuration_adv.h with mine?

@Sgt.Taz3D 4 жыл бұрын

@@jamesb4242 If you want to hit me up on discord Sgt.Taz #0096 only thing that comes to mind is adv h. #define Z_DUAL_STEPPER_DRIVERS might not be set correctly