Рет қаралды 962
The Artillery X4 Plus is a solid 300x300x400mm printer with a ton of features out of the box. With Klipper Firmware installed, which sets the default speed at 300 mm/s and permits a maximum speed of 500 mm/s.
Printing Technology - FDM
Build Volume - 300*300*400 cm (L*W*H)
Product Dimensions - 510*490*680mm
Net Weight - 15.5 kg
Typical Printing Speed - 300mm/s
Max Printing Speed - 500mm/s
Max Acceleration - 10000mm/s²
Printing Accuracy - ±0.1mm
Printer Frame - Robust All Metal Design
Filament Diameter - 1.75mm
Nozzle Temp - ≤300°C
Hotbed Temp - ≤100°C
Build Surface - Dual Sided Textured Magnetic PEI Plate
UI Language - Support English, German, Chinese
File Transfer- USB Drive, Wifi
Extruder - All Metal Dual Gear Direct Drive
Levelling Mode - 121 Point Auto Levelling
Display Screen - 4.3 inch Touchscreen
Print File Format - G-Code
Resume Printing - Yes
Rated Power- AC100/240V
Rated Voltage - 450W
Slicing Software - Artillery Slicer, Cura
Support Filament - PLA/TPU/PETG/ABS/PET/Carbon
Input Shaping - Yes (Preset in Factory)
Pressure Advanced - Yes (Preset in Factory)
Dual Support Rods - Yes
Auto Clean Nozzle - Yes
more info:
www.artillery3d.com/products/...
Models used all from Twisty Prints:
/ posts
Inquiries cooperation contact:
Will Zoobkoff - StudioZombie3D
studiozombie3d@gmail.com
linktr.ee/Zombiej79
/ zombiej79_3d
/ will.zoobkoff
vm.tiktok.com/ZMLsvq3Rh
/ studiozombie3
#3dprinting