After this printer, Artillery might actually not go bankrupt

Рет қаралды 2,036

Күн бұрын

Find out more about pcbway: theprinthouse.link/PCBWay
theprinthouse.link/Artillery
We dive into the Artillery X4 Plus, a large-format 3D printer that marks a significant improvement in Artillery's product line. Despite its past challenges, Artillery has made a commendable comeback with the X4 Plus, offering an affordable Klipper firmware-based option for enthusiasts seeking value for money. While it's not without its quirks, the manageable issues are far outweighed by the impressive print quality and the attractive price point of this printer. 🔧✨
0:00 Introduction
0:57 X4 Plus Basics
2:01 The Artillery X4 Plus Specs
3:52 Odd Printer Design Choices
4:40 Poor Initial Printer Impressions
5:39 Printing Speed Marketing Claims
6:15 Finally Enjoyed Printing w/ the X4 Plus
7:15 Extra X4 Plus Thoughts
8:16 Final Thoughts
9:12 Closing
#3dprinting #3dprinter #3dprint
🌐 Social Media Links:
💬 Discord: theprinthouse.link/Discord
📷 Instagram: theprinthouse.link/Instagram
🐦 Twitter: theprinthouse.link/Twitter
💼 Consider purchasing with The Print House affiliate links (Help support the channel at no additional cost to you):
🌟 Bambu Lab: theprinthouse.link/BambuLab
🌟 AnkerMake: theprinthouse.link/AnkerMake
🌟 Revopoint 3D Scanning: theprinthouse.link/Revopoint
🌟 Anycubic: theprinthouse.link/Anycubic
🌟QIDI Tech: theprinthouse.link/Qidi
🌟 BIQU: theprinthouse.link/BIQU
🌟 ELEGOO: theprinthouse.link/ELEGOO
🛒 Merchandise Links:
👕 Official Merch: [Currently Seeking a Merchandise Manager]
💾 Uploaded STL Files: theprinthouse.link/Cults3D
🆓 Free STL Files: theprinthouse.link/Printables
🥇 Etsy: theprinthouse.link/Etsy
💪 Incredible Sponsors of ThePrintHouse:
🌟 Polymaker: theprinthouse.link/Polymaker
🌟 PCBWay: theprinthouse.link/PCBWay
🌟 AnkerMake: theprinthouse.link/AnkerMake
🔗 Other Common Bits:
📌 Subscribe: theprinthouse.link/Subscribe
🔔 Turn on Notifications
💬 Leave a Comment: Who is interested in the future for Artillery? They have come a long way!!
👍 Like this Video!
📢 Share to all Friends!
🎥 Primary Equipment Used: [Who wants an equipment list?
📧 Business Inquiries: ThyPrintHouse@gmail.com
🙏 Thank you for watching! Don't forget to like, share, and subscribe for more ThePrintHouse content!

Пікірлер: 22

@ObservantSeedsower 3 ай бұрын

I am very happy with my sv06 plus with klipper.

@MrBaskins2010 4 ай бұрын

the walled garden hotend is an instant no for me. i wish them the best

@ThePrintHouse 4 ай бұрын

The hot end situation bothers me a lot as well. I am still very happy to see Artillery begin to produce printers that are good though. Previously I felt like their offerings were subpar at best.

@dkev0 4 ай бұрын

Makes me glad I bought the Kobra 2 Plus instead.

@chazzwyrabkiewicz8941 4 ай бұрын

I can snag a Sunlu S8/9 for sub $200… 310x310x400 and i can put Klipper on it for cheap. I’d rather do that…

@ThePrintHouse 4 ай бұрын

I have added klipper to printers that didnt natively have it to begin with, and there are always drawbacks, but I do agree, of you only want a large build volume with klipper there are cheaper ways to do that if you're willing to put in the work. I really appreciate the aesthetics of this machine as well, so for me that is worth something. I think the biggest thing though is that because this natively runs klipper, someone that doesnt want to fight with the install has the option in a relatively budget category.

@anthonylong5870 4 ай бұрын

I thought that the Elegoo Neptune Max was probably the best large format printer on the market?

@jhnstuhlmiller 4 ай бұрын

if You want a big bed printer with klipper there are options. This is not the printer you are looking for. K1 max is only 180 more and a better printer.

@ThePrintHouse 4 ай бұрын

The K1 max is a similar size and definitely a better option if the money exists, but it is significantly more expensive. K1 Max is $899 which I would definitely classify into a different price category.

@jhnstuhlmiller 4 ай бұрын

@@ThePrintHouse It can be had for $699 regularly and comes with a better extruder, an enclosure etc. I am waiting for Bambu to come out with a 400x400 x 400 printer

@ThePrintHouse 4 ай бұрын

@@jhnstuhlmiller hmm that's news to me. I am not saying you're wrong, I just hasn't seen it. I will say though, there are quite a few people on a VERY strict budget and can't even go $50 over let alone $270, so for someone that wants or needs a large printer, there is still value here. It's all very user dependent honestly, but I see your point.

@cybergnetwork588 4 ай бұрын

Elegoo Neptune 4 Plus, Anycubic Kobra 2 Plus, Artillery X4 Plus = Exactly all the same with small differences. What is common: Garbage customer service, almost no replacement parts, very bad firmware implementation.

@ThePrintHouse 4 ай бұрын

The klipper implementation on the X4 Plus is actually done well. I havent used those other machines

@anthonylong5870 4 ай бұрын

The Elegoo actually has great customer service and their firmware is quite solid

@matchugg547 4 ай бұрын

the artillery is a POS , the spool holder is crap the spools fall off,the feed system starts slipping after a few prints ( cause its plastic and not metal), the cooling fans are crap hence why it has a massive heat sink, and the cables are all sub par and will require replacement after a few prints. Good luck trying to get replacement parts for these printers. I can't believe a printer like this doesnt have auto bed levelling. I will stick with my Neptunes and Magicians which are way cheaper and have a bigger build volume.

@ThePrintHouse 4 ай бұрын

@@matchugg547 it's the same quality as everything else I own. Ankermake is the only company with a "good" spool holder

@matchugg547 4 ай бұрын

@@ThePrintHouse mate i run a print farm it is NOT the same quaility as everything else. Yes it works great for a week or to and then because of the cost cutting where the feed mechanisim is plastic instead of metal will fail and you even said yourself you couldnt dismantle the hot end because all the screws were stripped. Why defend a product that is inferior to its competitors has no after market services and you can't buy parts for........Oh I see they gave you the printer for free!!!!

@jbourne696 3 ай бұрын

"Despite its past challenges, Artillery has made a commendable comeback" The challenge was almost for their customers. Trying to bring to life a coasty piece of sh*t "Klipper firmware-based option for enthusiasts seeking value for money" Money, yes, value, no... "the attractive price point of this printer." With artillery, you always get far less than you paid for. Even the screws are garbage. After two shitty artillery, i'm perfectly happy with my sovol. Artillery can continue to sell machines only because some suck.... errr... influencers received a free machine to make the promo of such a shamish brand