Adding Panel Lines to Complex Shapes in Blender

Рет қаралды 10,686

Күн бұрын

Sometimes a shape is just too complex for the add ons that normally make panel lines easier. But all is not lost, while it is a bit of a longer process it is perfectly possible to make uniform panel lines!
Gundam head by Felipe Carranza ( / gundamrules )
Panel Lines: • How to add panel line ...
Designing complex panel lines: • How to create complex ...
Inset Panel Pro Tips: • Pro tips for creating ...
Raised Panels: • Raised Sci-Fi Panels -...
Just Panels Add On: • The Just Panels Add On...
Just Panels gets even better!: • Just Panels gets even ...
Check out the Patreon: / artisansofvaul
(Affiliate links) SUPPORT THE CHANNEL BY BUYING SOME STUFF YOU WERE GOING TO GET ANYWAY ;p
Hard Ops and Boxcutter discount bundle: blendermarket....
Hard Ops: blendermarket....
Boxcutter: blendermarket....
Just Panels Add On: blendermarket....
Construction Lines: blendermarket....
Cablerator: blendermarket....
(Non-affiliate links)
Machin3 Tools: machin3.gumroa...

Пікірлер: 30

@evanwilliams1199 6 ай бұрын

Oh my gosh, thank you. I'd spent a while now trying to figure out how to make these kinds of panel lines. I tried making series of faces, shrinkwrapping them onto the mesh then solidifying them and boolean-cutting them out, and that had a load of issues, then I tried using a curve, shrinkwrapping it onto the mesh and lofting a square profile along the curve, before boolean cutting, and that still had issues... This looks like it'll work out fine though. Thanks for making this.

@ArtisansofVaul 6 ай бұрын

My pleasure evan, its great to know its helped. Thanks for watching and taking the time to comment and I hope it works out well 😁

@FelipeCarranzaPhotography Жыл бұрын

thuis is just so helpful, Thanks bro you rock

@ArtisansofVaul Жыл бұрын

Glad to help and well done on the awesome project!

@johanneswetzel3023 Жыл бұрын

That was very helpful, thank you! ❤

@ArtisansofVaul Жыл бұрын

No problem. Thanks for taking the time to comment, its a great help for small channels like this and really appreciated.

@d_dog9939 6 ай бұрын

a little improvement 1.Face Out 2.Cutter Intersect Face (get only Face 3.Face Solidify with Offset 0 (get the real Line cutter 4.Object Difference Line Cutter thus the Panel Line will face to object face rather than face to viewport

@d_dog9939 6 ай бұрын

though the width of panel line may change on curve surface boxcutter seems only samples at the start point need a better way to get same width panel line on curve surface

@ArtisansofVaul 6 ай бұрын

Nice suggestions 👍🏻

@andrewglick6279 Жыл бұрын

I don't know how it's possible, but you always seem to have this amazing ability to always upload the exact tutorial that I need, when I need it. I am noticing that with some more complex overlapping panel lines (like the airplane panel lines shown in another one of your videos), I am getting issues where the booleans will solve correctly in some orientations of the part, but if I rotate it, it totally freaks out. All the normals are right, and everything is parent correctly as far as I can tell, so I don't know why it does this. (why must you do this to me, Blender???)

@ArtisansofVaul Жыл бұрын

That's frustrating. A quick one to check is that the boolean operation is set to "exact" and not "fast" as that can make a huge difference to the calculations Blender is able to make to get it to work

@mobamenace3591 Жыл бұрын

Nice one bro 👍

@ArtisansofVaul Жыл бұрын

Cheers 😁 Thanks for watching and commenting 👌

@jimmyzimms Жыл бұрын

The mesh is so dense that you can almost get away with selecting faces and using extrude along normals (at least for the 'straight' lines). Nice to see that my amateur approach of using booleans to accomplish this on the type of situation is actually reasonable :) There's an interesting situation you have where the angle on the panel line that goes to the top doesn't follow the same relative distance to the front of the "vent". What's your recommendation for following arbitrary edges? So for instance if I wanted this panel line to follow the edge that isn't at "standard easy" angles (45, 30, 15, etc) at a set distance...

@ArtisansofVaul Жыл бұрын

In that case I would just use that edge as something to make my cutter from. I'd copy the edge, extend it and then make a shape from that for the intersection boolean.

@ArtisansofVaul Жыл бұрын

In that case I would just use that edge as something to make my cutter from. I'd copy the edge, extend it and then make a shape from that for the intersection boolean.

@ArtisansofVaul Жыл бұрын

In that case I would just use that edge as something to make my cutter from. I'd copy the edge, extend it and then make a shape from that for the intersection boolean.

@Luke101 8 ай бұрын

Boxcutter is basically unusable for me if I'm woking on a high poly model like a helmet or something. I have an M1 Macbook pro so my performance isn't an issue. I double checked that the add ons were up to date, and reinstalled them just to be certain. Yet whenever I try to start drawing my lines, it gets unbelievably slow, and then if I try to inset, Blender crashes completely. I have no idea why and it's so frustrating since I paid for these add ons.

@ArtisansofVaul 8 ай бұрын

That's really frustrating. I haven't got a Mac to compare but I heard that Blender does have some performance issues on Mac's as it was originally designed to be used on PC. I can't speak to how true that was but the videos here were all filmed on a 5 year old laptop at the time (while running the recording software) so the addon's should work. Sorry I can't be more help on this.

@Luke101 8 ай бұрын

I appreciate your reply! It's so weird, everything else functions super smooth, it's only after I've extruded the cut through the model that things start crapping out. And only on dense meshes. I take it doing this panel line process is more of a final step thing after you've done all your subdivisions? Gonna keep trying, maybe I just did something wrong along the way@@ArtisansofVaul

@ArtisansofVaul 8 ай бұрын

@Luke101 Yeah. To be honest I don't use SubD a lot as I prefer more control but I would so it after yeah.

@NerdLegionInc 3 ай бұрын

Is it possible to use Justpanels for more complex shapes like this or like guns and such? I've been playing with it and sometimes it works, sometimes it has issues.

@ArtisansofVaul 3 ай бұрын

The main issue I have found is with it trying to bevel everything. Turn the bevel size to 0 for everything and it works pretty reliably. You can change it to that in the defaults in the addon settings too so you don't have to do it each time

@NerdLegionInc 3 ай бұрын

@@ArtisansofVaul Oh snap. Yea I'll change the defaults. I definately don't want bevels on majority of them anyway unless it's flat. Always got the tips my man

@danielduppo992 Жыл бұрын

Can this method be used for making creases around muscles in a buff male model?

@ArtisansofVaul 11 ай бұрын

It could but Id be more likely to use the sculpt tools.

@MrJ3 Жыл бұрын

A problem I keep having is that Boxcutter's Inset causes Blender to lag a great deal, like to the point where I can't see what I'm doing. I have a powerful device so this should not be happening. Any ideas?

@ArtisansofVaul Жыл бұрын

I really don't. My laptop isn't hugely powerful and I don't have this unless I'm cutting something very complex

@ArtisansofVaul Жыл бұрын

Maybe contact the creator as they might have some ideas.

@MrJ3 Жыл бұрын

@@ArtisansofVaul Will probably have to do that! Seems to have something to do with "Live display of the cuts during modal". Thanks anyway, love all your videos!