Assembling a 500HP Miata Engine From The Bare Block, ASMR Style.

Рет қаралды 1,228,793

Күн бұрын

#asmr #lofi #mazda #miata
By popular demand, here is the FULL parts list for the engine:
www.thecarpassionchannel.com/v...
Since I already have a full engine build series, I didn't want to make repeat content, but still wanted to showcase the work that went into this thing. So I ended up spending weeks making this instead lolll. Keep in mind, this video is just for entertainment, and does not show the other half of what goes into building an engine, aka taking all of the measurements, modifying parts to fit, cleaning everything piece by piece, etc. What you see here is basically the fun part! If you'd like more info on the engine build check out the technical blog here:
www.thecarpassionchannel.com/v...
----------
Support TheCarPassionChannel on Patreon!
/ thecarpassionchannel
Want to make a one-time donation? You can buy me a gallon of E85!
www.buymeacoffee.com/carpassion
Interested in having a 1 on 1 video call? Details below:
thecarpassionchannel.as.me/
What’s that digital gauge in the dash?! It’s called a CanChecked and you can pick one up from my friends at Bofi Racing!
bofiracing.co.uk/?ref=7465 (Car Passion affiliate link)
Get yourself a Dragy! (Affiliate Link)
dragymotorsports.com/?rfsn=65...
Check out my Amazon Store!
www.amazon.com/shop/thecarpas...
Use coupon code CARPASSION50 to save $50 on your first High Performance Academy course!
hpcdmy.co/cp10
---------
0:00 Bearings & Crankshaft
3:11 Pistons & Rods
8:24 Oil Pump & Pan
14:37 Water Pump, Harmonic Balancer
16:37 Valvetrain & Cams
19:35 Head Gasket & Head Install
21:56 Timing Belt, Plugs, Oil Filter
23:10 Covers
24:24 COPs & VVT
27:25 Intake & Exhaust Manifolds, Fuel Rail
28:57 Final Product

Пікірлер: 995

@stinkydoggy98 7 ай бұрын

No blah blah blah talk, no annoying music, no selfie stick where they film themselves more than the work. No this is just straight to the work. Perfect! Looks awesome. Subbed.

@teamgonzo9289 5 ай бұрын

Nailed it!!! 👍

@williamsiniovosa4945 5 ай бұрын

This is the best engine build i have seen in while ❤

@__mehdimt__ 4 ай бұрын

Absolutely i hate those videos that they talk with their annoying voice and saying about the process that we’re watching it with our eyes This one was perfect thank you 🔥🔥🔥

@Gizmos_and_stuff 3 ай бұрын

i found the music pretty annoying, but otherwise yeah!

@xkasxprox 3 ай бұрын

This was what I was looking for, need more long ones for my second monitor content!

@mrfixall Жыл бұрын

I have to say that that was like watching an artist work, And create a work of art, worthy of any museum. Pretty excellent for a guy that's taking a break. Well played.

@jefftoonstra5087 Жыл бұрын

And not having a big shop to work out of. Can’t wait for dyno day!

@dgcmusi Жыл бұрын

A lot of knowledge right there….love watching it..

@JohnKickboxing Жыл бұрын

Hey ... by the way, is this engine turbocharged?

@BWORKS2203 Жыл бұрын

@@JohnKickboxing yes it is

@JohnKickboxing Жыл бұрын

@@BWORKS2203 👌

@MultiFerrarifreak Жыл бұрын

Yesssss exactly what I needed right now! Thanks for taking your time to produce this great content for us :)

@kurkkobain 9 ай бұрын

what , just joining aprts,, dude thas nothing you dot make a racing engine tyat way,

@Luckde10 Жыл бұрын

Greg, your techniques have become far more refined since the fist build. Looks far more surgical than your earlier builds. Look forward to the day on the dyn.

@crossfiregaming6332 Жыл бұрын

can we please point out that 1 handed hex key skill. I have never seen anyone do it so smoothly!

@crumpets19 Жыл бұрын

Daddy Greg bringing home the bacon yet again

@potymouf1 Жыл бұрын

On valentines day no less. HE DOES LOVE US! lol

@DaeCRG1 Жыл бұрын

don’t ever say that again bro..

@andynguyen1969 10 ай бұрын

@caseykelso1 8 ай бұрын

Do you even have a clue that it works? Do you even know the guy?

@henryhooker3282 8 ай бұрын

You okay? Are you gay?

@mazdamiatafied Жыл бұрын

Beautiful work Greg, hypnotizing. Your cinematography has gotten so good!

@andrewyang60 Жыл бұрын

I’ve been watching for years but never commented. This video was absolutely fantastic. You have gotten so good at your craft, both in building and capturing/editing. Love your videos, keep them coming!

@Cairo5555 Жыл бұрын

Wow, you outdid yourself on this video Greg. Well done it's such a nice video to watch and love the background music. :) Keep up all the good and hard work!

@38tech Жыл бұрын

Bruh, the chilliest half hour of yt ever. Thanks, that was very relaxing.

@twostorywood Жыл бұрын

Amen

@erictol Жыл бұрын

Thank you Greg for all your inspiring videos. This one could not be better timed, I currently putting together my shaved 2001 VVT block for my 10AE. Keep doing what you do!

@RaiLosTHisMind 7 ай бұрын

Words cannot describe how satisfying it is watching an engine be assembled. All while being educational. Please make more of these the exact same formate exact same music. It would be much appreciated 🙌🏾

@dinokolonic9716 Жыл бұрын

This is like the best lego set in the world. Watching that whole camshaft assembly get put on top of the block was like building a lego and it makes you take a detour to build a different part and then you put it all together and it looks amazing. This is truly one of the best things I've watched.

@alanscott156 Жыл бұрын

My guy got all the good angles. It's reasonably laborious to do an engine build but to spend the time to film it in this way ON TOP of that is seriously extra. You have above and beyond discipline.

@HaworthJimmy 10 ай бұрын

The parts list and details you’ve provided are fantastic. So much research and planning given away to anyone on a similar journey with their Miata. Good on you ❤

@Spademonkey Жыл бұрын

Happy to see this coming together man! Always stoked to see your builds and the directions they go! Keep it up!

@darkengel1210 Жыл бұрын

Nice to see the use of Nord-Lock Parts in this Engine, they just work!

@neddleman26 Жыл бұрын

A video I will watch many times in the future. Thanks for the outstanding content! I know this added a lot of time to the build!

@stephenhawkingMLG Жыл бұрын

Using your videos as a template for my own built motor miata. Really appreciate the depth and detail as you’re pushing the limits of these BPs! Hope soon people will start to see the potential these motors have and how much cheaper they are to build than other motors!

@justrelaxing1501 Жыл бұрын

Man I loved this video! No talking, just heads up explanations of what various parts were and attention to detail. Thanks for sharing this.

@williamkelly2467 6 ай бұрын

I find myself always coming back to this video. You sir have crafted the absolute most perfect engine build video I have ever seen. Thank you!

@TheCarPassionChannel 6 ай бұрын

I appreciate you!!

@lucusc4002 Жыл бұрын

The video I did not know I needed, engine building is always a joy to watch.

@arimaoutdoors8255 Жыл бұрын

After building a few turbo Miata’s years ago it’s fun to see the whole process done again. Takes me back to the early 2000s. Thank you

@ryandeweese363 8 ай бұрын

One of the best put together engine and video builds I've seen in a long time!! Very well put together, and can't wait to get started on my next engine build!! Last one was a 2008 4.7, Super smooth!!

@FDB77 Жыл бұрын

I may not have anyone for Valentine's Day but at least I have Miata Dad and my NB :) Thanks for the relaxing video Craig.

@IllIlIlllIllIlIl Жыл бұрын

This is the first video I've watched from start to finish, no bathroom breaks or nuthin' Just remember Craig, with this much power comes great responsibility

@MapexMiata Жыл бұрын

This was so incredibly satisfying; thank you for taking all the extra time and effort to create this video! You're the man!

@bobbyjackson2564 Жыл бұрын

Cinematic masterpiece from start to finish. Giving me the motivation I needed to get going with my turbo build. Also, you really did flex on everyone with the one handed allen technique 10/10

@jdroller-cruz4296 Жыл бұрын

great content, Greg will always be a legend in the miata community

@elijahbakker1513 Жыл бұрын

I'd also like to add that your quality of work has increased astoundingly! I was rebuilding my first motor around when you started your big red and I've been working in the industry since. I build race motors for motocross bikes and you have done just as much as our highest of quality builds. If you do end up reading this, much love ❤️

@TheCarPassionChannel Жыл бұрын

I think you might be getting confused, the "updated" VVT head gasket from Mazda has smaller openings for the front coolant ports, but this gasket has full sized openings. There is nothing blocked off in the rear with any head gaskets as far as I know

@elijahbakker1513 Жыл бұрын

@TheCarPassionChannel yes, after looking back into it, you are correct. Just making sure you're on your toes 😉 I'll edit it subsequently after this reply

@TheCarPassionChannel Жыл бұрын

@@elijahbakker1513 You had me looking back at my own footage too, hahaha

@williamsiniovosa4945 5 ай бұрын

This was so soothing, locked everyone out to enjoy this build i cherished every second, and the music was spot on. I wished it never ended.

@philjones5728 Жыл бұрын

I LOVED this! Strangely very satisfying. Well done with all the editing that must've gone into this video 10/10

@SuperDafi1980 Жыл бұрын

A little greeting from Denmark, A real pleasure looking at Greg, keep up the good work 😃👌👍

@flipflop7577 Жыл бұрын

Stunning!! 🥹Absolutely STUNNING video!! Perfect music choice, very relaxing yet soothing to watch and listen to! Now I can go to bed and dream about miatas and highpower BPs😴🤤

@lindkvistandreas Жыл бұрын

This is going to be epic man!.. thank you for sharing and looking forward to see testing and tuning on this!

@dylanthomas9777 Жыл бұрын

This was a beautiful video, from the detail of assembly to the, the camera angles, and the editing. Also an awesome educational video.

@dirtperson4221slash2 Жыл бұрын

Have to comment twice after watching in full.. That ol Mundo hex spin down to the last nuts and bolts represents so many years of wrenching to reach this milestone. I'm proud for you never giving up on your passions my amigo. Always looking forward to seeing what you can build! Thank you for continuing to be an inspiration and role model to us all!

@valdirjose7118 Жыл бұрын

Incrível trabalho de montagem do motor, parabéns pelo desempenho, habilidade e competência!

@roderickmacdonald2389 8 ай бұрын

That was one of the most relaxing engine builds I've seen could have this on loop!

@1987RX7TII Жыл бұрын

This was so calming. On one hand, I’ve done most of what you’ve shown here except for installing pistons or taking out valves and keepers. Watching you do the whole engine almost makes me want to build a long nose 1.6 I have laying around in my basement that has mild rod knock. But then I’ll need to buy all the expensive goodies and convince my wife the car needed it. Haha. Love to see it.

@nic1586 Жыл бұрын

wow someday ill have enough money to build an engine like this until then love seeing others build stuff

@Laz_Arus Жыл бұрын

It sure looks easier to replace the timing belt, water pump and main seal when the engine is on an engine stand than what I had to endure changing those parts while the engine is in situ.

@kylelambert1672 Жыл бұрын

Same here. Speaking of which @thecarpassionchannel I saw in this video you slid the woodruff key towards the crank pulley after it's back on. In the timing belt video I don't remember you mentioning that

@kylelambert1672 Жыл бұрын

Mine never came off the crank nose and just chilled there the entire time I was replacing stuff. And my pulley parts just went back on but the woodruff key still didn't move

@Patrick94GSR Жыл бұрын

working on an engine on a stand is an absolute dream compared to bending over or laying around on the ground underneath the car. I've done my timing belt in the car, and also dropped the trans and changed the clutch under the car. Now I have my whole engine and trans out of the car, and it's so much easier.

@badjoe985 Жыл бұрын

from the build to the editing, great job. I've loved it, thank you

@A_Gray Жыл бұрын

Ive always enjoyed the videos where its just chill vibs and shows you whats up instead of telling you, while showing you. I hope you do similar style edits for any wrenching videos. Much love as always 🧡

@MultiMinors Жыл бұрын

What a beautiful engine

@fatninja987 Жыл бұрын

I’m here dad

@upnorteeh Жыл бұрын

Thank you for making this video, it definitely hit the spot. Keep up the amazing work!

@danielplumley2649 Жыл бұрын

What a beautiful piece of art. Can’t wait to hear it run again!

@mmjohns2705 Жыл бұрын

I wish i could press like more than once for content like this! 🎉🥓

@joeldesmit Жыл бұрын

Greg is the only dad I trust to go out for a carton of milk and come back❤️

@igorbarbarossa Жыл бұрын

Without milk, but in a Miata

@TheMapleDaily Жыл бұрын

This plus your previous videos is a perfect tutorial for an engine build!

@iainbagnall4825 Жыл бұрын

Dear god this is relaxing. I never knew I needed a 30 minute engine build video. Kudos for doing this with bare hands instead of gloves! That is one clean engine but still. It actually looks like you got a mani before shooting this lol. Which is the ultimate way to show your miata love.

@pappieee9409 Жыл бұрын

I bought a 05 nb the other day and I found your channel literally about a hour ago, you are a absolute god send and a gem, thank you daddy Greg and much love from the uk 🫶🏻

@loganritt3805 10 ай бұрын

was so happy to watch this after unwinding from a long day, love to see it

@boostjunky8171 Жыл бұрын

Excellent video Greg, so interesting and relaxing at the same time. Appreciate the effort buddy 👍🏼

@yatajoris2857 Жыл бұрын

Love the vibe, great build and thanks for taking us along for the journey. This thing is gonna be sick as always😍

@ArthurSperotto Жыл бұрын

This was beyond awesome to watch! Excited to see the trans and diff solutions to put this power to the ground.

@sparkie5571 Жыл бұрын

well shot and well mastered. looks amazing, and I can’t wait to see it in action

@brookesenfrance3852 9 ай бұрын

Fabulous way to spend a half hour.❤😎 great music, no noise or talking, just assembly❤😎

@BradAF Жыл бұрын

Inspirational!! I’ve got a BP4W waiting for a rebuild, I’ll be watching this video on loop 🙏

@raphaelsanchez4797 Жыл бұрын

Great music choice and sharp videography. Very satisfying to watch. Love the one-handed Allen wrench tightening. Thanks.

@mazboengineer Жыл бұрын

Wow! That engine ❤ sweet work bro 👏🏼👌🏼🤩 ..beautifully edited too, nice job.

@raventai Жыл бұрын

Really Zen video to watch, no chat, just letting the parts and the process tell the story. Well done sir. you earned a like & subscribe from an ND owner.

@handleymachine4421 Жыл бұрын

This was an extremely satisfying video. And money shot at the end! Magnificent!!! Such a purdy motor.

@aristotleallen5577 Жыл бұрын

Total ASMR, those torque wrench clicks made me all tingly.

@ninjaStalker069 4 ай бұрын

"cries in poor" man, i felt that on a spiritual level LOLOL

@elwindewitte Жыл бұрын

That was so satisfying! Amazing to watch Greg!

@Epiphonech Жыл бұрын

Thanks for motivation and guidance for our builds!

@kg_canuck Жыл бұрын

God, you make building an engine seem really easy. Thoroughly enjoyable to watch

@restoreandrepair-vn Жыл бұрын

Another masterpiece! Such a pleasure to watch! Thank you 💕

@tylermfdurden Жыл бұрын

Planning on putting my head back together this weekend, so this was a treat

@JamesChurchill3 Жыл бұрын

Gaskets & chill with Ol' Gregg on Valentine's Day? You spoil us.

@curlywurly1987 Жыл бұрын

simply beautiful, had my MX5 going on 8 years now, so far turbo'ed brakes, suspension and other little bits. been looking to rebuild and forged the engine to get to a magic 350BHP and to do it myself a cherry poppin moment and this video makes me want to do it.

@thomassylvestro9041 6 ай бұрын

One of the best videos, I have ever seen. Could not stop watching... Amazing...

@ericwietzke9158 Жыл бұрын

This is so good! Props Greg for all ya do for us :)

@peteypeedi973 Жыл бұрын

This has been soothing and brought me peace. Fine craftsmanship and assembly. Bravo my guy Bravo 😎👏🏾👏🏾👏🏾👏🏾

@Friendsofdonr Жыл бұрын

Driven Racing has been amazing in my engine and the br30 worked so well, engine was broke in extremely quickly and efficiently. I was pulling 27inhg within 45 miles, following the Flying Miata break-in procedure. Glad to finally get time to watch this Creighg!

@cavalierliberty6838 11 ай бұрын

I have seen plenty of people assemble engines, you have it down to an artform. I want to be on your level one day, man.

@tech-mike321 6 ай бұрын

Exactly what I needed to see as motivational goals for my garage find Miata project! 😊

@tylersaupe1612 5 ай бұрын

Beautiful, well done sir! Great skill and production. Fire this bad boy up!

@PinChE_LoCo 10 ай бұрын

Classiest mechanic content 👌🏼 I've ever seen.

@UnawardedGamer Жыл бұрын

Praise the KZfaq algorithm for recommending me this. This is a work of art and the editing is great. So many wallpaper and poster worthy shots too

@TheCarPassionChannel Жыл бұрын

Thanks for stopping by!

@Nasonix2 Жыл бұрын

So happy to get to see it happen. Couldnt of hoped for more. For those of us who have built engines before, it's time investing! Let alone video recording and editing such a slick assembly compilation. This is awesome you could probably do so much with this engine. I'm a little concerned with the crank being able to handle high boost though. In theory it should but who knows. That's the thing I don't know of anyone else that has run the level you might intend on it. Is there anyone else running upper 400's whp on them? If not I'm worried that it might be intended for natural aspirated builds (all out n/a builds) hense the cast material. Don't get me wrong cast cranks can still make 400+whp. But my thinking is it shares the same counter weight design as the forged cranks and we know that it's not favorable for high RPM's. All I *know* for sure is the M-motorsports crank is cast however the metal alloys used is supposed to be better than the OEM Miata one. The better design at the nose of the crank (will help mains). In theory I think it should be good for what you made before but I just don't know for sure I'm just worried since nobody else has committed their build to the unknown like you'd be doing. It's awesome 👍

@JonnyJonDogg Жыл бұрын

Greg thankyou so much for this video! I am about to build a new engine for my mk1 and you have no idea how useful this video is to me :)

@JOHN42TD Жыл бұрын

Such a great video, you've outdone yourself with this one

@higginsjoe Жыл бұрын

I would say one of the greatest videos I’ve ever watched. Tip of the hat to you sir.

@Patrick94GSR Жыл бұрын

hell yeah such perfect timing on this. My 2000 BP4W is blown apart down to the long block on the engine stand right now, for resealing and cleaning everything. I'm not removing the head or doing anything internal, but replacing all external seals, gaskets, o-rings, all new coolant hoses, oil pan sealing, etc. Just ordered all my parts yesterday. Can't wait to get it all back together and driving again.

@harleydaun3847 Жыл бұрын

I have been waiting oh so long for this to drop thanks miata pops

@highvisibilityraincoat Жыл бұрын

Greg thank you for showing me that RTV can that is a life changer omg

@calinponea Жыл бұрын

This is just beautiful.. Wonderful work!

@MrDungante Жыл бұрын

Looks good, I could tell how excited you are by how much you were shaking the camera at the end lol.

@JeremyHeinks Жыл бұрын

Absolutely beautiful work.

@Az-dq1gm Жыл бұрын

Beautiful video and engine. Can't wait to see it in action

@princesssolace4337 Жыл бұрын

I build my 2012 Mazdaspeed3 engine from bare block to handle 500hp. Using Mazda edit software , I tune it on RON100 pump gas to just 310hp/470Nm@1.2bar. That was 3 years ago and many smiles for miles with zero issue and still counting. I up grade the air filters , top mount intercooler+plumbing , HPFP , BPV, downpipe, pistons+con rods, valve springs+seals, injector seals , main bearings, head+girdle bolts , balance shaft+EGR+cat delete , solid rear motor mount. Still on stock turbo+manifold and cams. Stock intake manifold+throttle body. Stock piston+valve size. Stock resonators and silencers. Stock passenger+driver motor mounts. Stock flywheel+clutch. Honestly I can't never been happier with many others 300hp Speed3 with stock internals tend to blow up when they up the boost and driven hard. It's the high torque that will punch a hole through the block. If I was to upgrade the turbo+manifold , I wud probably tune it to 380hp - 420hp on pump gas with the core foundation has been properly set up.