A rough video of how I put my dredge together. I hope somebody gets some useful information out of it.
Пікірлер: 61
@travismotorsports94782 жыл бұрын
I have that same dredge thing is a beast
@outnorthprospecting2 жыл бұрын
Nice, now I've got some ideas for my 4", thanks👍😀
@thomaspennyweightfowlkes40942 жыл бұрын
Glad it helped out.
@richardbell9255 жыл бұрын
Thank you Thomas very informative and impressive. You did a good job on this video.
@rockwasher78403 жыл бұрын
Great video, everyone thinks it’s easy. Hard work and experience.
@MysteriousOutdoors Жыл бұрын
Love your video, I have a 2.5 proline dredge/highbanker im working on floating.
@DanielHunterUSA Жыл бұрын
Can’t wait to go dredge
@billking2003 жыл бұрын
Thank you for making a great video, it was very helpful for me. I just bought a used 4” and hopefully put it this summer
@thomaspennyweightfowlkes40942 жыл бұрын
Nice. You will like it. Just big enough for one person to handle. Thanks for watching!
@RonFProspecting4 жыл бұрын
That was good man. Thanks for sharing
@ignatiusjeffers37922 жыл бұрын
Great video.
@thomaspennyweightfowlkes40942 жыл бұрын
Thanks. Glad you liked it.
@bobmorris44014 жыл бұрын
Great video...thank you answered a couple questions I just built my own 3 inch dredge
@thomaspennyweightfowlkes40944 жыл бұрын
Glad it he!ped. Thanks for watching.
@rockwasher78404 жыл бұрын
Hey, great video. That 68 lb pump is a dog. All else is a great day. Thanks.
@barryscustomworks54912 жыл бұрын
Can you do a detailed video of your trailer setup ?
@auMr.Pocket Жыл бұрын
Liked, subscribed and full alerts. Thanks, good job
@thomaspennyweightfowlkes4094 Жыл бұрын
Thanks for watching Tazz.
@scottvincent52914 жыл бұрын
Nice set up man pretty cool
@thomaspennyweightfowlkes40944 жыл бұрын
Thanks for watching.
@MidwestMamasAdventures7 жыл бұрын
Thanks for making the video. Ive been wondering how to do that. Randy says he has a dredge at his moms in Utah. Does me a lot of good there, huh?
@gorillagoldhunters Жыл бұрын
Awesome video! New sub!
@thomaspennyweightfowlkes4094 Жыл бұрын
Thanks for watching!
@rickywilliford23533 жыл бұрын
Very informative, thanks, also I see your setup for your dive air with the quick connect you have the snap end on the pump with a pop off valve how do you like that verses the nipple end on the pump and no pop off
@thomaspennyweightfowlkes40943 жыл бұрын
Thanks for watching. I like it either way I tie off my reserve tank so the hose to the compressor doesn't move at all.
@DanielHunterUSA2 жыл бұрын
I’m getting a 4” used full size keene tomorrow wit t80
@thomaspennyweightfowlkes40942 жыл бұрын
Niceeeeee. Go get that shiney. Thanks for watching.
@davidphilips12052 жыл бұрын
Thank you!
@thomaspennyweightfowlkes40942 жыл бұрын
Thanks for watching.
@PartridgeFamilyProspecting2 жыл бұрын
man im itching to put mine in!!! NH still pretty cold but gearing up!!
@thomaspennyweightfowlkes40942 жыл бұрын
I've got to make a trip up that way.
@PartridgeFamilyProspecting2 жыл бұрын
@@thomaspennyweightfowlkes4094 this will be my first season with the 4" keene.. very exciting
@thomaspennyweightfowlkes40942 жыл бұрын
@@PartridgeFamilyProspecting I love dredging. Can't wait till it warms up here so I can get some nozzle time in.
@danlonganecker7 жыл бұрын
Mighty fine dredge you got buddy, wanna clear some overburden for me. Lol
@thomaspennyweightfowlkes40947 жыл бұрын
Anytime, lol
@calebbennington73226 жыл бұрын
Great video Thomas I just got a Keene 4 inch 3 stage dredge. Did you put hog matts in you dredge? it kind of looks like it if you did how do you like them?
@thomaspennyweightfowlkes40946 жыл бұрын
Yep Caleb. I have hog mat in my dredge. I've been using them for about 2 yrs. I li!e them a lot. Works go on the gold here in Indiana and on the gold at Lu's in AL. Run my motor somewhere between 1/2 to 3/4 throttle. Fast clean up less cons.
@KyleThiemann6 жыл бұрын
I live in the Midwest as well, Missouri actually I'm attending the Indianapolis gold and treasure show and I'm going to be purchasing a dredge hopefully. Where can we dredge still ? I've tried searching for rules and regulations for years now and can't get a straight answer I'd hate to get it confiscated.
@thomaspennyweightfowlkes40946 жыл бұрын
Bernard Sheffer 816-390-6564 edsel58_2000@yahoo.com SHARON FOSTER 816-695-1620 mo_gpaa@hotmail.com These are two local gpaa chapter president's in Missouri. They should be able to tell you where you can dredge and what the rules and regulations are.
@KyleThiemann6 жыл бұрын
Thomas Fowlkes thank you !
@danielusa9982 жыл бұрын
What do you think about the 3 stage sluice box ? we are not to far apart I’m from Lafayette Indiana
@thomaspennyweightfowlkes40942 жыл бұрын
The 3 stage sluice works fine. In fact if set up properly, it catches gold as good as anything else. I use the gold hog matting to increase my fine gold recovery and decrease the amount of cons I have to carry out.
@raymondlivermore19596 жыл бұрын
hi thomas first time viewer. how do you adjust your sluice for angle?
@thomaspennyweightfowlkes40946 жыл бұрын
Hi Thanks for watching. The sluice angle is adjusted by moving the sluice back back and forth on the dredge frame. You may get a little more adjustment by weighting back of the dredge with rocks or lead weights.
@rickywilliford23533 жыл бұрын
I notice you are not to far from where I live. I'm curious as to where you.got.your splitter thats between your pump and high pressure hose?
@thomaspennyweightfowlkes40943 жыл бұрын
That comes from keene to allow you to connect their blaster nozzle.
@danielusa9982 жыл бұрын
Is this the full size 4” ?im getting ready to buy a keene 4” but im not sure if I get the mini or the full size what do you think ?
@thomaspennyweightfowlkes40942 жыл бұрын
Hi Daniel. Yes this is the full size 4 inch.
@kleberbraga25585 жыл бұрын
Aqui no Brasil não temos esse tipo de draga mais gostaria muito de ter uma dessa
@01jakefry7 жыл бұрын
Thanks for the video but we can't use them here anymore
@thomaspennyweightfowlkes40947 жыл бұрын
You're welcome. I did it mainly for the people in the places that can still dredge. Sorry that you can't in Oregon. Hopefully that will change soon. Thanks for watching.
@redstarterakota4 жыл бұрын
How much HP power engine ?
@thomaspennyweightfowlkes40944 жыл бұрын
It is the Honda GX 200. I believe it is 5.5hp. The old gx200 use to have 6.5 hp but they were rated wrong.
@redstarterakota4 жыл бұрын
I make 4 inch which 2 engine gx160, it's very strong
@uendelbralia47283 жыл бұрын
Quantos Hp?
@thomaspennyweightfowlkes40943 жыл бұрын
6.5 HP
@robertmcpherson79394 жыл бұрын
Get a dolly with good size wheels on it before you blow a gut bump.
@CandSMINING5 жыл бұрын
Thanks for the video. Looks like my 4" it may be its brother. Thanks again I did sub you r channel.
@donaldservais51777 жыл бұрын
you need a rubber tire dolly
@thomaspennyweightfowlkes40947 жыл бұрын
LOL I have a folding cart I don't use. I must think I need the exercise.