Audi TT Front Wishbone / Control arm Polybush Upgrade Options

Рет қаралды 13,512

4 жыл бұрын

Here is a video going over the replacement and upgrade options when changing the bushes on your front wishbones / control arms
Follow our journey,
Instagram: @theparrottbros
Facebook: / theparrottbros
Website: www.theparrottbros.co.uk
Shop Merch: www.theparrottbros.co.uk/shop
Email: theparrottbros@outlook.com
Supporting The Parrott Bros Channel If this Video / channel has saved you money, helped maintain your TT or you just love our content and you'd like to buy me a drink to say thank you, then feel free to send a donation to www.paypal.me/parrottbros All donations will be put back into making more great content!
All the parts shown in the video are found as a result of research & discussions over the years with Vag specialists.
All part numbers below suit what i have, please always double check before ordering. ( quattro / 4wd)
Stock bushes
8N0 407 181 B
8N0 407 182 A
Powerflex
PFF3-501 - amzn.to/36UIPIa
PFF3-610 - amzn.to/2zXf6lW
Strongflex
221343B
221344B
Cookbot
www.cbauto.co.uk/cookbots
New arms
www.ebay.co.uk/itm/Audi-TT-MK...
What equipment I use to create the videos you watch
Filming in the car :
Gopro Hero8 Black - amzn.to/2BtIqB0
Rode Video Micro - amzn.to/2A062N0
Gopro vlog case for camera with Mic mount - amzn.to/301aZzW
Genuine Gopro Suction Mount - amzn.to/3dthG1H
Filming outside:
Ax53 Camcorder 4K - amzn.to/3eD7ROO
Rode video mic pro - amzn.to/3gP1wBL
CRAPHY 165cm/65" tripod - amzn.to/3eLs8la
Filming in the office:
Sony A7 II - amzn.to/2U86IXL
Rode video mic pro - amzn.to/3gP1wBL
Joby gorilla handy pod - amzn.to/3eODMMn
AFFILIATE
I included affiliate links for the products I own and love, that just means I get a tiny percentage if you buy from my link, you still get the same price. It helps fund my channel because I basically do this all for free! I like to be transparent.
Please note that all videos are as a guide on how we would approach this restoration, please take care when doing it for yourself, we take no responsibility for any work you undertake yourself
Hope you have found this helpful; any questions drop them in the comments below.
Thanks for watching, see you next time.

Пікірлер: 46

@stevesloan6775 Жыл бұрын

I’ve just finished replacing my bushes today. Getting the bushes out as a DIY was a battle. I went down the local steel suppliers and looked through their off cuts bin and found pipe that fitted the inner and outer diameters. I first tried using the press with the tubes. Then I went and bought a M12 22cm long bolt, as well as a super long nut with 5 times the threads((36mm). I tried using the rattle gun to compress the two tubes. I managed to remove one bush using this method and then I broke the 22cm bolt on the second bush. Next I took a different tact and used the steel pipe with a 10mm steel plate on top and drilled down using my air hammer… Freaking works so good!!!!!!!!! Air-hammers for the win 🏆 🇦🇺🤜🏼🤛🏼🍀🍀🍀😎

@andredovlatyarian9734 3 жыл бұрын

Great video mate as I’m looking at options as the bushes on mine are knackered!

@TheParrottBros 3 жыл бұрын

Thanks buddy, I’ve had them on a few months now. Make a lovely difference I must say

@JDNSAUDIS 3 жыл бұрын

Just on with this now, gone for the power flex bushes, good satisfying mod

@TheParrottBros 3 жыл бұрын

J41D3N AUDI TT Quattro they are all very similar material, like you say well worth while, really tightens up the feel

@michaelmcloughlin1747 3 жыл бұрын

I put the Defcon kit on my 2002 225 TT and they changed my driving experience for the better. I now have 195,000 miles on my car and I'm still finding things to better my driving feel.

@TheParrottBros 3 жыл бұрын

Can’t fault you, I’m touching on 184k and if you got behind the wheel it feels like 24k now

@topmendia 4 жыл бұрын

Really interesting. You have by far the best Audi TT mk1 dedicated channel . Congratulation for your job. You share with all of us very i teresting content. I follow all your video. Confratulations for your grat channel and regards from the basque country!!!

@TheParrottBros 4 жыл бұрын

Thanks for the kind words, it’s nice to know that the videos are of interest and use to others. I make videos as I research info and a lot of times there is very little or poor quality information out there. So it’s always nice to accumulate all that good stuff and have it in one place and in a format which is useable for all from mechanic to the very basic tinkerer. Thanks for watching

@topmendia 4 жыл бұрын

The Parrott Bro’s ,yes you are right , I am also doing several research, may and many hours on internet finding informarion for the tt mk1 I am restoring. I also gave many information clasified in my dropbox accout just in case you need something maybe I can help you: timing belt detailed proccedure... I did not found a good DIY for removing turbo and clutch yet. Congratulations again for your channel.

@TheParrottBros 4 жыл бұрын

Thank you, that’s similar to me. I also have many word documents containing how to’s, part numbers, tech info etc. You can never had enough information, plus auto data and 7zap for all your part numbers and schematics. If your on Instagram or Facebook feel free to send me a message if you need anything / send us some pics of your project

@topmendia 4 жыл бұрын

The Parrott Bro’s , 7zap is new for me. I have been checking it. Looks interestind. Nirmally I use ETK Audi for references. Very powerfull, a lot of information for All audi cars. For repairing procedures and more issues I also use ELSAWIN from Audi. I also have bentley manual for tt mk1. Now I am finding information to repair wind deflector glass on my tt roadster. It is blocked, maybe the belt, I do not know. I am doing research about how open and repair.

@topmendia 4 жыл бұрын

The Parrott Bro’s , I am also trying to tune my car. TT mk1 roadster APX engine code. I updated intake TIP and ramair filter and forge DV valve. I like use vagcom to check faults and logging. I discovered recently me7logger, much lore better for logging. You can take 20/second. And you can check a lot of engine related values. My target is to read ecu with Nefmoto and try to tune it. I discovered a very interesting forum for that. But need time to read and make things properly. Mine is APX and narrowband. Not the best for ecu tunning but I will try to make stage one. I do not use instagram but I use facebook keep intouch and if I may help you with something let me know. Regards from the basque country! 💪

@parklife4130 4 жыл бұрын

Decent information, thanks man👍

@TheParrottBros 4 жыл бұрын

Thanks for the message 👍🏻

@Eddy-th3kc 4 жыл бұрын

Will be the first ahahah, been waitting for this!

@gplusgplus2286 4 жыл бұрын

Cookbots rule!! Steering feeling is vastly improved and I went with oem bushes all around (no poly)

@TheParrottBros 4 жыл бұрын

Gplus sucks big that’s what I’ve been hearing a lot. I need to order some cookbot rear adjustable arms soon. Oem will defiantly improve the feel of any car 15 years old and 75k miles on. I will see how the car does on the road and track with these strong flex and re assess in a years time.

@gplusgplus2286 4 жыл бұрын

@@TheParrottBros done the whole lot in 2016 I think, immediately steering was fast and precise. Before it was "soupy" (if you know what I mean)

@TheParrottBros 4 жыл бұрын

I know exactly what your talking about, where I live we use the term Woolley, sort of like not tight, vague & not as together as it could be 👍🏻

@steveokeefe9663 Жыл бұрын

Hi Dom I've a 2003 TT Quattro 180 6sp. Engine code ARY. Got a whining noise from gears. I bought a shim with the cover. On doing the job it's seems there's no access to fix it. It looks sealed. All the online videos I've seen has easy access. Take cover & retaining clip out. Put shim on then clip & cap. Easy!! Any thoughts or ideas please I've taken a photo too

@Ianf1x Жыл бұрын

Hi I bought new genuine bolts and see that bolts same diameter but rear Bush 13mm hole so bolt wobbly. Did you see this in your arms. I was checking to see if. it's normal. Thanks ian

@TheNorville2 4 жыл бұрын

Another video, when I drilled my rubbers and I broke about 6 drills, it kept getting caught and snapping, so make sure you have enough spare drills to hand.

@TheParrottBros 4 жыл бұрын

Haha yeah that’s a good point plenty of drill bits and a sharp hacksaw blade :)

@russelldownesdownes5618 Жыл бұрын

Any videos of replacing break lines.

@jaapfeitsma559 4 жыл бұрын

I've got some questions for you. Is your TT lowered? With springs or coils? How much is it lowered? Did you replace the read tie rods for adjustable ones and do you maybe know at which point if lowering adjustable tie rods are neccesary?

@TheParrottBros 4 жыл бұрын

Yeah it’s lowered 40mm on apex springs and shortened shocks, I have ordered cookbot adjustable control arms as the wheels are seriously cambered. Needs to be brought back square as will make the tyres bald very quickly.

@jaapfeitsma559 4 жыл бұрын

Allright! Thanks for the info. Do you know if a 25mm or 30mm drop also require adjustable tie rods?

@TheParrottBros 4 жыл бұрын

I would say it’s less of an issue however it’s probably still a good idea. The rear tie arms are known to fail so worth changing the bushes and getting adjustable ones. Just don’t get the cheap ones off eBay. Search cookbot if you want to buy some

@jaapfeitsma559 4 жыл бұрын

@@TheParrottBrosOkay, thanks again!

@madusathe2nd333 3 жыл бұрын

What would happen if you didnt replace the Bush when it time to be replaced? What would happen to the car I mean or wheels

@TheParrottBros 3 жыл бұрын

You would likely get a knock under braking or accelerating,added play in the feel on the steering wheel. they are quite easy to see with a torch if you turn your wheel and lay down and look at them

@kashv2500 2 жыл бұрын

Good video mate, how does it ride with poly bushes?

@TheParrottBros 2 жыл бұрын

You certainly notice it, it’s very firm and you can feel every bump in the road. I’m still on shocks and springs not Coilovers too! But tuning in and steering feedback is brilliant