Yeah, very helpful. But, as most technicians will tell you, putting a thing back together again is trickier than taking it apart. Your video would be much more useful (more than it is) if you showed the infernally difficult method of reattaching the button brackets and mute switch to a replacement ribbon assembly. Then showing any tips on reassembling it all. I got there in the end, but more detail on the parts of the job that actually make this so difficult would be better.

you sir are an absolute genius. this silence issue has plagued me for months! and now i finally have my volume back!!

i only see a 'take you iphone apart' video where is the repair part?

Thank you for this video. One thing I would like to mention that I noticed while doing this. When reinserting the 3 lower screws (the ones that attach the volume control) make sure that the buttons still have a nice click to them. If you tighten them too much it will prevent the volume up down from being clicked. This is up to personal preference how much you want to tightenthem.

Try to loosen one of the three screws holding volume button bracket in place. Hope it helps.

Thanks for the video my friend. Helped me a lot.

thanks brow..your are the best

that was REALY helpfull thanks a lot

very nicey detailed, thank you

Thank you in the reves you don't show how to return the flex cable but, i understand it alone it's take me some time but in general, good video :)

were you bought i broke mine whn i was taking th battery of can you give a link or the nae of the exactly thing plz..

Nice 👌🏻

may i get an answer please ? my dads iphone 3gs 16gb has no more sound when it rings nor does it vibrate anymore, but if he answers it he can hear the other person who is calling and the other person can hear him , when the headphones are plugged in you can hear the ringtone in them but the phone still doesnt vibrate .... wil changing the bottm part that has the ds connector and speakers make it work ? .... it has no sound at all , not when unlocking , not when trying a game, etc. thank you

thank you so much just that when i put the motherboard back it didn't go in all the way so they back wont close but i fixed it thank you

Whats the song at the start?

thank you, i just repaired my iphone with your precious help :) great vídeo

can you kindly give me ideas and opinion why my iPhone silent button was always approaching while im not using it!?? it's annoying that while im plying games always goes to mute and unmute.. appreciate a lot for response thanks.

Song ? Please

I have a problem where my ring tone doesn't work. I have gone into settings and removed the silent mode, but it still doesn't work. I can get it to vibrate only when its on silent, otherwise I have no idea when someone calls me.

i have a question. my loud speakers audio is all messed up as well as my ear piece speaker for calls and my head phone jack all output staticy noise and distorted audio...even at high levels you can barely hear the audio but its there barely audible..its mainly static and you can hear the speakers thump as if theres something wrong going on...what could it be? some people say logic board? is there any other posibillity? i want to fix my self but i doubt changing each thing individually would fix it since this all happened at the same time...! please help!!

Looks really hard but will give it a try. Just a question, i got audio problems in my iphone. Cant hear nothing... Whats the piece i should replace?

Anyone know the screw sizes (mm)? for this part (volume, mute) and the two power/sleep button screws?

The vibrator is 1 of 2 things. The motor is or the flex cable is bad. To test the motor use a volt meter or use a 9 volt battery w/ a wire connected to the positive and another wire connected to the neg side. Then connect the other end of the wires to the 2 prongs of the vibrate motor and it will buzz if the motor is good. It it doesn't work most likely you just need to replace the motor which is a lot easier. The sound has to do w the bottom speaker part of the phone. Replace the speaker unit.

Thanks homes. My iphone has no volume on calls, just replace this flex and its working ok now.

one of those girly dust blocker things got stuck in mine can i just skip to step eight?

i did this in kitchen tools and it works :)

Hey i have a question, i have a iPhone 5c and my flashlight doesnt work, it doesnt light in any way although the back camera works, what could be the solution?

Open the phone and make sure the 3 flex cable ribbons under the heat shiled at the top of the phone are connected firmly to the motherboard. Mine would buzz on and off and thats how I fixed it from doing that.

"remove silent button bracket" was the fix at the end.

My iphone 4s _8gb's_ "plus" -volume button isn't working. Where can I get ip4s 8gb's volume button flex cable?

I re-asselmbled everyhting doing the "REVERSE" procedure, and now the UP volume button doesn't work!!! What can it be??? By the way: remove the water indicator sticker from the jack before reinstallinga new one

God damn....May as well buy a new fucking phone then.

Hello, my iphone 4 doesn't make any sound but it vibrates! Should i change anything? is there anything i should replace?

The video is all over the place, cant see the details because of the little effects and goes too fast where you need to focus!

Megan

May I ask for the app name pretty please :) don't wanna go wrecking my girlfriends iphone :3

just replaced mine. You should definitely change the difficulty to all five stars. thanks anyways my phone can vibrate again.

So which part of this actually fixes the phone?...

just over 1min of the video is for the stated purpose.

I want to meet those who gave 468 likes? What they learn open your iPhone or tear into pieces? A big loss of 6:44

Broke my iPhone with this...

No way I'm pulling my entire phone apart. Knowing me, there's little chance everything will go smoothly.

This is for a GSM iPhone, to those who are curious.

Is not an iPhone 4S on this video

oh really ???

Its really not that hard.I just used this video to fix my vibration since the motor worked but the cable was apparently dead. The hardest part is getting the screws back into the silent switch since it's a tight space. Just see how the flex cable is bent before removing the old cable so you know how to bend the new flex cable. It will make sense once you get in there.

I don't think that was necessary Mr Lopez

This made me nervous

Fuck i broke the motherboard while removing it!

Fuck that shit. Seriously, how can repair not be taken into consideration when making these things? They should have instructions on the back panel and easier steps to take!!!

I broke my iphone!!!

No thanks, I will just buy a new phone.

It's such a fucking cop out to just show us how to dismantle the phone and then say 'do the same in reverse'. The procedure is not always exactly the same... installing a new part is not the same as reassembling the phone... occasionally there are parts to take off of old components, screens, pads washers etc and fix to the new ones. To assume your audience knows this is asinine... if they did then they wouldn't need to watch this in the first place.