Auto Body Repair: Pull on a 2005 Ford Focus

No video

Auto Body Repair: Pull on a 2005 Ford Focus

Рет қаралды 193,088

Күн бұрын

Interested in auto body reconstruction? Take a look at the skills you can learn at the Auto Body Collision Technology program at Dakota County Technical College in Rosemount, Minnesota. Here, we have second-year student Chad Stigsell with Instructor Gerry Rainford describing a pull they are doing on a 2005 Ford Focus. To learn more about DCTC's Auto Body programs, visit: www.dctc.edu/ac...

Пікірлер: 104

@walterjoncas12 3 жыл бұрын

This student will never be unemployed. He is learning a valuable and useful trade.

@eliaquinangeles6413 2 жыл бұрын

He isn't learning safety ways of how to operate the frame machine this lesson was so unsafe.

@robjohnson5364 11 ай бұрын

Impressive demonstration. The instructor and student both did an excellent job.

@rogelioolvera5079 5 жыл бұрын

Crush zone is kinked and torn, the rail is done. get it straight and cut. Weld in the new one in days time.

@fordnut4914 5 жыл бұрын

Arthur tussik is king at rebuilding weecks

@rolandomontana1389 2 жыл бұрын

I don't have a machine I have a strong tree and thats what I use 🤣🤣🤣

@WayneStcroix 3 жыл бұрын

Can you show how to pull out a section of a rear passenger quarter panel by the lower part of the rear door I want learn how to make a successful pull on my own to repair my car thank you love the video

@HristovRumen 5 жыл бұрын

Arthur Tussik's watching this and laughing at both of them

@omarhore6272 4 жыл бұрын

جيد

@nowhereman6945 4 жыл бұрын

Rumen H. These 2 guys perfectly showing the public as the best of clowns... dont know what theyre doing .. a simple kink and tiny torn ... they would confuse and misled viewers

@nowhereman6945 3 жыл бұрын

Shut up , youve been on that stage as a beginner just remember your good and shitty days

@RidingwithDylan 4 жыл бұрын

Who honestly loves this measuring machine... Velocty < Car-Oliner...

@collextoys 4 жыл бұрын

car o liner is better we have a velocity it just sit there and no one uses it . I like it better for full frames though, because it moves with the car in stead of working off a bridge.

@chrisneal66 5 жыл бұрын

Interesting, why not cut the damaged part off and weld on a new piece? Is'nt the integrity of the metal where it collapsed compromised?

@robii387 3 жыл бұрын

That is what I was thinking. If the frame rail is kinked or torn it must go.

@JuanYRuby1209Marine 2 жыл бұрын

I'm guessing, it's an option wich welding might cost more than just pulling

@jacollision2752 5 жыл бұрын

2 to 3 weeks .. what u only work on the week end??

@frankboykin3940 3 жыл бұрын

Smh I would hope 2 to 3 days smh

@jamesm568 Жыл бұрын

The worst part is ordering parts because 9 out of 10 parts will come damage.

@jamesa2961 2 жыл бұрын

Doesn't repairing that rail weaken that rail or how do u get structure and strengthen it

@smallsap6264 5 жыл бұрын

I had to scroll down to see the shit talking comments for this one haha

@ishtiyaqdar6699 4 жыл бұрын

Nice thinking dears

@IlovecheveyIlovechevey 2 жыл бұрын

This video should have been approved by a Chief frame tech..

@angelbernal6451 3 жыл бұрын

Nice tools !!!

@rich-up4tp 4 жыл бұрын

PS you shouldn't have your hand on the chains

@Dieselpwr 7 ай бұрын

All you need is on the job training companies need to get back to that

@saidabdulle4592 2 жыл бұрын

How much is coast that frame machine with Diacnostic

@dominic5063 3 жыл бұрын

Where can I buy those pulling clamps?

@yellowdeer7163 2 жыл бұрын

OHSA would have a field day.

@h2oelchile 5 жыл бұрын

75 x40 is 3000 x 3 weeks 9000k car work only 1200 usd

@bobbyhood3109 4 жыл бұрын

While they were talking I wouldve had that car pulled and putting it back together....

@antony10calix2 4 жыл бұрын

whats the name of the clamps on the chassis

@hxhdfjifzirstc894 3 жыл бұрын

Chassis clamps

@robertcampbell5605 2 жыл бұрын

If that clamp on the right slips off he’s directly taking a shot to the knees with a 5 pound clamp

@theessexhunter1305 3 жыл бұрын

Who oh why does the 10 thousand pound quote always pop up... If it is not my rig is 50 thousand pounds etc lol The handle of the hammer is too long you need to be using a block of wood and stand back then bash it....

@joej.3962 5 жыл бұрын

This set up is so unsafe it's ridiculous. Using the wrong chains, hooks and no guarding. A technical school teaching unsafe practices such as this is unfortunate. The rigging is not used for dynamic variable loads. The guy hitting the hammer on the load and having his head near the line of fire if the chain brakes creates is a major safety hazard.

@spinhotmotors3081 Жыл бұрын

your right

@MarkInLA Жыл бұрын

Though I see your point, I really don't think those chains or the bolts/other linkage is going to snap and fly in the air... This stuff looks like it could hold King Kong !!

@MrOldeastdallas 4 жыл бұрын

How much does something like this cost? I need to get a frame straighten on a car.

@sresto1 4 жыл бұрын

MrOldeastdallas same question here

@olenaerhardt7725 5 жыл бұрын

A frame was bent due to hit in the rear, trunk doesn't close. Can it be straightened by pulling by that frame with another car? Thank you for the informative film.

@omarhore6272 4 жыл бұрын

Yas

@ericnarvaiz9216 5 жыл бұрын

I would of done replaced it

@TheLazusa 4 жыл бұрын

All the parts on site , I ll hand that car to my paint guy in 8 hours .. 2-3 weeks for what ?? 😀😀

@UshouldTryReality 4 жыл бұрын

Paint is included in the 2 weeks and he is a student working @ school not all day! Everyone is a hero in the comment section!

@gpcm9226 5 жыл бұрын

Colin Farrell was an auto tech before becoming an actor

@dannyboettger8482 2 жыл бұрын

2 weeks at the school. Not in real time. Course at least in omaha,Ne is 3 hours long, one night a week,at night. And most is book work first. Just wanted to lay that out there because all these complainers are forgetting that it is a school. 6 hrs for frame repair is about right. For that repair.

@perfecto-wtransporterzzpin6380 3 жыл бұрын

Arthur tussik is a true oid school craftsman he would run rings around all of these so called 'techs' way too much time to get that job out the door.time is money,s safety first.

@jeremieheustis7190 5 жыл бұрын

That rail is NOT repairable.

@lewiscollins1045 5 жыл бұрын

It's fucked...

@dvk578 4 жыл бұрын

I was thinking the same thing, but I am a noob so I was going with the flow. I figure once it starts tearing like that it has to be replaced. Can they weld the tears?

@maplenerd1 2 жыл бұрын

Guys with a Oak tree and a Harbor Freight chinesium chain laugh at these guys.

@petermoran2204 5 жыл бұрын

Looks like it's his first day at the frame machine for being an apprentice..

@materiialart8226 3 жыл бұрын

Your hand on the chians is a big no no bro.. you coach should be correcting you

@youtybe5029 3 жыл бұрын

Сенгкю 👍👍

@kevinrowley3999 2 жыл бұрын

I can’t believe what I’m seeing that rail is not repairable 😳

@spinhotmotors3081 Жыл бұрын

you must be new comer in auto repair

@davidaguirre6614 Жыл бұрын

you got to straighten it before you can replace it

@jonathanolsson7347 5 жыл бұрын

That repair should take about a week, that’s including working 10 plus others car also

@alimightytaco8443 4 жыл бұрын

Jonathan Olsson plus waiting on parts lol

@nowhereman6945 4 жыл бұрын

Jonathan Ollson hahahahaha,that was funny

@damianramdass3886 5 жыл бұрын

Used some heat U guys are not very experience and its scary to see u work .

@bstevermer9293 5 жыл бұрын

damian ramdass Did u miss the point of it’s a school??

@scarjd95 5 жыл бұрын

you could not use heat on high strength to straighten it

@alimightytaco8443 4 жыл бұрын

Scar JD right lol just gotta replace it now

@Jasonshepard2 3 жыл бұрын

They’re not supposed to be grabbing the chain while pressure is applied

@marcussatterwhite 4 жыл бұрын

👍👍

@ivanov568 Жыл бұрын

They have no safety gear on, not covering the chains with safety blanket, and they are standing so close to all that pressure... If the chain snaps smh

@keithclark486 Жыл бұрын

What about taking 2 to 3 weeks doing the repair? Shouldn't take but 3 days at the most, what do you think?

@jasonglynn7686 5 жыл бұрын

Are you kidding me!! Unbelievable!! This must be an episode of the Twilight Zone auto body edition!! Cannot believe that a so called technical college is teaching kids how to completely repair a car THE WRONG WAY! That rail is DONE. You don't weld tears and hammer and dolly sharp kinks in frame rails!! What a disaster!

@johnnyluck8102 3 жыл бұрын

Two weeks? lol Thats more then the car is worth.

@mikenismogtr 3 жыл бұрын

The parts are already checked in and ready, car will be done in two weeks? i can make enough money to buy that focus in 2 weeks

@despizedicon 4 жыл бұрын

new metal please. You gotta Focus on the metal.

@HristovRumen 5 жыл бұрын

Typically if you got damage to your intake, a/c compressor, alternator or whatever other "deeper" component, then that unibody is far from being fit for repairs for the usa or Canadian market. Oh, and freon is not used in that car. You chose to be technical in your descriptions, but lack use of proper terminology when it comes to the refrigerant.

@davidaguirre6614 Жыл бұрын

what are you talking about intake alternator are not part of the unibody whatever is damaged in the unibody it gets replaced

@turdferguson1021 3 жыл бұрын

Poor Chad.

@IPHONEhn504 5 жыл бұрын

i do that job in 5 day complete repair fixing and paint

@robcrissinger776 4 жыл бұрын

My my aren't you proud of yourself... Were you that fast your first time tearing down , setting Datums , fixing the frame, rebuilding the a/c, replacing Panels, priming, painting I highly doubt it ahole....

@L.S.T.N.Y 4 жыл бұрын

That is dangerous 1 and 2 I don’t really believe that is going never be the same ever again once the metal is damaged you’ll never ever gonna get it 100% straight but for educational and training purposes 👍👍