How to change front suspension arm / front control arm on MERCEDES-BENZ E (W210) [TUTORIAL AUTODOC]

Рет қаралды 50,554

autodoc.co.uk

5 жыл бұрын

How to change front suspension arm / front control arm on MERCEDES-BENZ E (W210) 4.2 Saloon 06.1995-08.2003 [TUTORIAL AUTODOC]
Suspension arm on MERCEDES-BENZ E-Class T-modell (S210) (06.1996-03.2003) / MERCEDES-BENZ E-Class Saloon ((W210)) (06.1995-03.2002) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce suspension arm: RIDEX; STARK; FEBI BILSTEIN; TRW; A.B.S.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Suspension arm: www.autodoc.co.uk/car-parts/s...
Suspension arm for MERCEDES-BENZ E (W210): www.autodoc.co.uk/car-parts/s...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ kzfaq.info?s...
🛠️The tools you need to replace front suspension arm:
- wire brush
- WD-40 spray
- copper grease
- Torx bit T50
- drive socket No.10
- drive socket No.16
- combination spanner No.16
- combination spanner No.22
- wheel impact socket №17
- ratchet wrench
- torque wrench
- crow bar
- tap wrench
- pin punch
- rubber mallet
- strut spring compressor
- ball joint remover
- hydraulic transmission jack
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► MERCEDES-BENZ car repair tutorial - • MERCEDES-BENZ car repa...
► MERCEDES-BENZ E W210 car repair tutorial - • MERCEDES-BENZ E (W210)...
► How to replace front wheel bearing MERCEDES-BENZ E W210 - • How to change front wh...
► How to replace a Front Springs on MERCEDES-BENZ E W210 - • How to change a Front ...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Пікірлер: 36

@autodocuk 5 жыл бұрын

Have a look at other videos on our channel: 🔸 MERCEDES-BENZ E W210 car repair tutorial - kzfaq.info/sun/PLWep5LzT0sxlChY_4rhmGAR8Qqt5Nel5- 🔸 How to replace fuel filter on MERCEDES-BENZ E W210 - kzfaq.info/get/bejne/ja2emrqWs5ibpmg.html 🔸 How to replace front wheel bearing MERCEDES-BENZ E W210 - kzfaq.info/get/bejne/l62EpdCBzdXamok.html 🔸 How to replace a Front Springs on MERCEDES-BENZ E W210 - kzfaq.info/get/bejne/arKFirxz16yUmmw.html 🔸 How to replace rear shock absorbers MERCEDES-BENZ E W210 - kzfaq.info/get/bejne/Z8WjrLqbkp2WfaM.html

@AlexandrForgot Жыл бұрын

Good work !

@alexey9900 5 жыл бұрын

Good!Good👍👍👍

@MrBugsier5 4 жыл бұрын

inportant information on this video!!!!, Mark the positions of the 2 washers and bolts when connecting to the frame! this alighn the wheel positions!! (you can check the original positions by the indent marks on the frame) (washer position)

@autodocuk 4 жыл бұрын

Thank you for your comment! It is a valuable suggestion that will be very useful for our viewers. Best Regards, Autodoc Team.

@kevinoconnell8242 2 жыл бұрын

Nice Job thanks for the torques...

@autodocuk 2 жыл бұрын

Thank you for your comment! We are pleased that you liked our video. AUTODOC

@kasems1536 4 ай бұрын

Thank’s form Bangkok ,,,,,

@wolfensteinJB 5 жыл бұрын

Great quality, I'm impressed! As a note I wouldn't spray WD-40 on rubber bushings and ball joint boots because it's petroleum based and not good for rubber. Also these wheels do not look good on the w210 IMHO :)

@autodocuk 5 жыл бұрын

Thank you for your feedback! We make our videos for general purposes and some parts of it can vary from the actual replacement procedure. Be sure to subscribe to our channel in order to see more interesting videos coming out soon. Best regards, Autodoc!

@JahinIinI 4 жыл бұрын

Video is good. Music is terrible.

@jefong58 2 жыл бұрын

Hi I just saw this video very interesting and resourceful. My question is upon returning the bolts, is there a right position of the bolt? According to the wheel alignment mechanic there’s a limited movement of the lower control arm when turning the bolt. Thanks!

@autodocuk 2 жыл бұрын

Unfortunately, we do not have this information. AUTODOC

@robcrissinger776 2 жыл бұрын

Yes the washer is installed in the same direction as removed and the bolt has flats that locate them as before removal.

@knut5328 4 жыл бұрын

on my w210 e230 my front,right,Lower control arm cracked and needs replacing, is there anything important that i need to know besides: preload suspension (10-15cm),and torque spec's when tightening? and should anything be replaced during this procedure(nuts, bolt's, reapply loctite, etc) im new to control arm replacement so any help would be greatly appreciated :)

@autodocuk 4 жыл бұрын

Thank you for your feedback! The procedure on your car may differ, we always recommend that you contact the service to carry out work with the suspension, as you may encounter difficulties that only a qualified and experienced craftsman can handle. Best Regards, Autodoc Team!

@justinhaller2055 Жыл бұрын

You guys always seem as calm as Hindu cows I don't know how you do it...

@focusmd 4 жыл бұрын

Good video. However, the music doesn't fit and is distracting.

@autodocuk 4 жыл бұрын

Thank you for your feedback! We appreciate your attention to the details and your opinion. Our experts will look into it. Stay tuned for more videos in the days ahead. Best regards, Autodoc team!

@Bleutisk 8 ай бұрын

Just turn down the volume! There is no verbal guidance. Just music. @@autodocuk

@ndokariaboki2349 4 жыл бұрын

Hi! Thanks for the videos, they are very helpful for DIYers with little to no idea like me. Is this vehicle a 4matic? I have a 2001 E430 4matic. Thanks

@autodocuk 4 жыл бұрын

The car in this video is not 4matic, it is a standard 2wd. Best Regards, Autodoc Team

@danielpoe6435 4 жыл бұрын

@@autodocuk F

@dlwst44 4 жыл бұрын

4matic w210’s are a huge pita to do front shocks and arms.

@Melspace02 2 жыл бұрын

How many Labor ball-park is this if you have all tools required?

@autodocuk 2 жыл бұрын

Unfortunately, we don't have any information. AUTODOC

@ELdanizz 2 жыл бұрын

W202 please😁

@autodocuk 2 жыл бұрын

In general, the replacement will be similar, the only thing is that it may differ slightly in the design features of your car. More accurate information can be obtained in the technical documentation for the car or by contacting the service AUTODOC