Back to Basics: Evo Sportster Rocker Box Gasket Service

No video

Back to Basics: Evo Sportster Rocker Box Gasket Service

Рет қаралды 42,600

BiltwellCycleParts

Күн бұрын

Пікірлер: 49

@ronwilhelms7433 2 ай бұрын

This was excellent! Walked me step by step through replacing my rocker box gaskets.

@YeahNahMaybe947 2 жыл бұрын

Thank you for the clear, concise commentary, easy to follow tutorial with great camera work & zero unnecessary chatter to stretch the video out to fit in 2 adverts. Oh yeah the what tools you need was really handy. .

@thebanditbiker9425 6 жыл бұрын

Great, careful step-by-step tutorial Biltwell crew. Sound is good, lighting is good and the VO is great! Saving this for future maintenance!

@TeddCookerly 3 жыл бұрын

Thank you so much for this video. I have an 883 hugger that I have on a motor mount right now and I have been wrestling with the idea of doing the gaskets myself but I question my skills. This is a confidence builder for sure. THANK YOU

@hardtorn Жыл бұрын

Thank you.. probably the best how to video I have watched in along time.

@joeg5400 3 ай бұрын

This video is on point, awesome job!

@dwaynecorrea9775 3 жыл бұрын

THE BEST VID ON THIS PROCEDURE!!!! THX!!!

@Salvatore3333 5 жыл бұрын

You are good, explaining clear, slow and steady good man.

@Nifilheimur 2 жыл бұрын

Awesome video. going to install rocker lockers in my sporty as they are getting so loud and this was exactly what i needed!

@divco13 5 жыл бұрын

As others said, perfect instructions. Thank you.

@funguseater40 5 жыл бұрын

Very clear, quality instruction video. The very muted music is perfect. Thanks, and subscribed !

@livemorededicated3881 5 жыл бұрын

Always love your shit ! Clear simple grwat image great sound ! Cool mustache bru

@p.istaker3057 3 жыл бұрын

Just found your vid dude , finally a vid omitting all the crap and waffling 😀

@zamiel66666 2 жыл бұрын

This is very useful information thank you so much

@windjamrr 8 ай бұрын

Clear as a bell !!!!

@user-bd2qk5qe6s 2 жыл бұрын

Thanks a lot! You guys are awesome!

@sickness170 5 жыл бұрын

Great explanation, but make sure the gasket is sat correctly before tightening up.

@timongole123 Жыл бұрын

Him ; “You’ve got to have a torque wrench for this service” Me ; “A quarter turn before it strips will do” 😎

@darinyoung4044 26 күн бұрын

Great video , Just a quick question. I have watched other video’s on this and most say to remove the plugs and rotate the rear wheel while in gear to find TDC to take the pressure off. I am curious as to why you do not do this ?

@bernardlesperance742 5 ай бұрын

Surprised you didn't first find top dead center to relieve the pressure on the rocker box before removing the bolts. Also surprised that you didn't line up the new gasket before putting back the lower valve cover on it.

@Steve1d Жыл бұрын

Thanks, great video!

@Horrented 4 жыл бұрын

does the bike have to be on Top dead center ??

@user-si7iz6zg3n 4 ай бұрын

There may be less pressure on the springs if you turn the engine to top dead center

@SUPPORTYOURSELF 2 жыл бұрын

super helpful, thanks guys!

@alderbottomoutdoors9794 2 жыл бұрын

Great vid!

@getoffmygrass6974 4 жыл бұрын

I’m pretty sure the reason he is not explaining TDC is because if you don’t already know this then you shouldn’t be doing the job. IMHO

@robertkrieger8394 5 жыл бұрын

It's this guy would put the Piston up on top dead center both valves would be closed and you wouldn't have that pressure on the valve springs then you wouldn't have the pressure when you take them bolts out for the rock armsthen you wouldn't have to worry about criss-crossing your bolts as you take them out

@suazuki 3 жыл бұрын

How often do you need to replace the gaskets?

@GaryLordsWayMinistry 5 жыл бұрын

I need that tool for that rear rocker cover with the short 3/16th hex head wrench, where was it purchased and who makes it? My 3.7 fuel tank has a support bracket right above this hex bolt and can't get it out, even with cutting down a 90 degree Hex wrench to fit in it still can't get it out, maybe they previous owner used red lock tight or something on it.

@edwinherrera-nieto- 4 жыл бұрын

appreciate the video, don't have a bunch of money just laying around, so I try to do things like this myself.

@vondenballs 2 жыл бұрын

Good vid, thanks.

@Sportybob 5 жыл бұрын

Y eather way are they jameson or comitec paper o sheet metal gasckets that go eather way 0r please answer this how did you know you were on top dead cenrer did you do this prosses but not mention it great tatorial on specs had to like the vid hope to see more soon your subby here

@ToDaMn 3 жыл бұрын

Can you make due with an off year Sportster Service manual? Ya know because they haven't changed in years

@henrymartin9147 Жыл бұрын

Question… is this identical to a 1200 also? I have a 1990 XLH Sportster that’s knocking a bit in the top front head and need to tear it open to inspect

@divco13 5 жыл бұрын

Recommendation's on High quality Gaskets. For this R&R.

@vagrant318 5 жыл бұрын

What kind of wrenches? My cheap socket set and torque wrench doesn't fit under the backbone. Maybe need to upgrade to snap on?? Nice explanation and video btw.

@BiltwellCycleParts 5 жыл бұрын

This is the tool Rob uses to get those bolts under the backbone: www.jpcycles.com/product/910-880/kastar-rocker-box-cover-wrench-replacement-bits?mrkgcl=444&mrkgadid=1000000&Google+Shopping++-+All+Products&product_id=910-880&adpos=1o1&creative=278659151686&device=c&matchtype=&network=g&gclid=Cj0KCQjws7TqBRDgARIsAAHLHP5RdBRgOQ7m2ZkBpWbOMWcT-yjJC85LBuW6B2hffX432maz4a-fnMMaAuEfEALw_wcB If you don't have access to one of those, you can trim down a regular allen wrench to fit it under the backbone.

@boomerguy9935 4 жыл бұрын

@@BiltwellCycleParts This link did not take me to the tool. It only took me to J&P Cycles website. Help.

@Tater4200 5 жыл бұрын

after this did you go save princes peach mario?

@GlorifiedSASS27 7 ай бұрын

Where did you get your 3/16 rocker box allen wrench? 1:35

@chazzcapone. 4 ай бұрын

At the gettn place. 1:36

@chazzcapone. 4 ай бұрын

Hey Luigi!! Where’s Mario??

@rosskelleher670 2 ай бұрын

How are you supposed to torque the rear bacj rocker cover bolt when the frame is 100% in the way . Dude didnt even torque it right in the vid, how tf do you fit and tool town there

@adamlahham28 6 жыл бұрын

Hi do you need to set bike into gear and find the piston on the top position? Thanks

@rcanoli99 5 жыл бұрын

I thought so too - you roll the motor over till both rockers are flat, which tells you the valves are closed (or nearly closed). Here it seems he just loosens the 4 bolts slowly and evenly and apparently it does the trick.