We'll fix that Ram and get Doosan sorted out no problem. All depends how far you want to go bud.

You know a job is getting done right when welderfabber turns up to do it lads

If baz and cal are on the job, You know its going to be done right👍😎

He knows what hes talking about welderfabber 💯 very clever bloke

Always good to see Marcus I miss seeing the will it run that he used to do

You only need the Professional Struggler and you have "The Gathering Of Eagles ".Baz & Cal, great to see them helping you out. What you boys really need is, an old unused small airstrip, and a new bailer. Stay strong boys, all your followers are rooting for you. Great to see our old friend Marcus back on the show too.

Great to see marky boy back I would love to see marky boy do more videos of will it run 😂

It's good to see Mark back in the video,the bayler will definitely be future-proofed once welder fabber is done with it,one day james you'll have that yard with the roundabout have a great week boys and zoe 👍

bailer buggered again starting too get its own drama show ,nice seeing 3 tonne building the new shed be nice too see how it comes along great content again guys keep up good work guys heeeeee

To be fair John makes Dean (and James) look as tight as Katie Price on a night out in Bacup. (😉John) I think you could do more videos with 3 Ton boys he comes across very well on camera. He’s confident and explains the job clearly when he approaches them. It’s also clear that he’s an intelligent guy and will be an asset to your business going forward. If Nathan is doing any Galvanised Steel welding ( they could be stainless hard to tell) not to inhale any fumes as they can cause severe respiratory issues if inhaled. Not so bad in an exposed area like that but it’s best practice to hold your breath when doing the run and then letting the vapours get blown away (or move away) before inhaling again. Ideally though you should wear a mask with a built in breather setup.

The 3ton build clips were the best! Give that man a raise 💪 Love seeing the yard transform top work

Marcus, what a guy. Very knowledgable and a full comedy package packed in one. Persuade him back to work with you all.

Nice to see welder faber and cal. At yard ya messer ❤

Not commented in a while but I still watch and like all the videos religiously. I definitely would like to see a will it run with marky boy the og of the channel 👍

When you consider the amount of stress placed on both the baler and the Doosan, it's not surprising that they have a huge attention demand and, of course, the Achilles' heal of the baler is the ram. Mr Welderfabber's attitude is spot on. "If you want a bodge ask someone else." So we can confidently wish you a good result with that one and the baler back in business tout de suite! Good to see an old favourite, Marcus, in the office on a visit. I for one would love to see his version of "Will it run?" always an interesting and entertaining episode in the past. Go for it! Nathan, another vessel of talent at BCB. I really enjoyed his commentary on his construction work I think he should be promoted to Fourton, he deserves it! Thanks, once more for an action packed episode, if Zoe is unwell I wish her a quick return. Best wishes.

Hi John + James, gutted about the baler ram going POP! on you, as always you got it under control you soon get the baler back on track. Good to see Marky long time no see Nathan doing a good job with those telegraph poles and welding the brackets to the containers. Keep it up boys, have a good week I'll catch you soon , Take care BCB

Thanks for the shout out everyone at Baxenden and i will definitely be using you again in the future 👍👍🛠🛠

Nice to see Markyboy back.Would be great to see some will it start videos as used to enjoy them.3 ton and Kenny look to be doing a great job there.xx

Welderfaber is on it as per

great episode, really enjoyed watching #3ton making the engine bay roof

Nice see baz come to the rescue

John behave lad!!!! Yes James get Marcus back in the yard on a Saturday!!

Great to see Marky boy back. And nathan....what a legend. Is there anything he cant do (other than fill a container load)?

25mm Flat plate or even better 25mm box section.. longer screws. Any movement in the ground that fixing is gonna cause you guys some issues - sort it out!

Marky boy's back! More will it runs please

For footage you should set the can up in the cab of the machine and time lapse you processing cars That’s some cool stuff when you do that

What a great video . 3 ton once again proved himself ( you should make him yard manager ) . Good to see the bin on his day release . Keep jup the good work lads . P.S those who are watching please subscribe and like it costs you nothing at all

Great too see welderfabber on your channel again

Ayup lads n lasses.. brilliant vlog as usual guys, Please get mark involved as often as possible as we really missed his involvement when he left, ps still don’t see anyone wearing any form of safety hats..safety baseball caps are cheap as chips compared to a fractured skull or a very costly injury claim..John lad get it sorted stop being tight .

Great video as always boys and Zoe. You can never ask who is the tightness and not put John in the question lol

Marky mark,give us your weekends man,top top fella

morning crew, hello im bubbadog. that darn baler playing up again. but those lads sound confident and will get it going again im sure. 3 ton the many of many talents on it again and always great on the cam. we still need to get rc mark with the head cam on doing some work and to tell us he loves engines. what a great gift the toolbox was.. 😎

When Welds become FAB🔧

Great video guys Great work and content guys Good work by 3 ton on the engine bay roof John it's time to bite the bolt mate and not be tight for once on the work welderfaber is going to do on the baler ram it will be done properly and not break again and over time it will pay you back because it won't break again happy days for you and lots of baling will get done and the yard cleared. James lad get yourself on TEMU they have got some T-shirts on there made just for you they have got on them IT IS WHAT IT IS ideal for you pal. See you on the next one guys.

OG since the old day's great seeing Marcus back i bet he could get that cossie fixed on the weekend's ❤

3 ton the scrap king. Keep them coming lads

More Zoey, more Zoey . Kenny for the win with a "Breakfast in a caniano"

fly-by pigeon welded the ram, howling

Love the video bud nice to see baz/cal in the yard 👍👍👍👍😂🤣😂🤣🍺🍺🍺🍺

OG Old Git 😮😮😊😊

3 Ton is an Amazing Guy he’s a Grafter 👊😎from everyone at Happaway Garage M.O.T Torquay Devon

Yes the messers Good video

Keep up the good work boys, I started watching the messers (dean and Luke) then prob 6 month ago i started watching ur vids and iv watched every one from the start and its crazy to see how much has changed in a small amount of time 💪 what happened to the machine operator He didn’t last long?

Proper way for a pot noodle is fill it to the line then fold the lid back over and leave it for 20-30 mins then come back and give it a quick stir and it’s perfect temp and no water left

Do you even need to ask? Of course we want more Marky boy and his “Will it start”.

Ahhh lads, that baler is like non-stop struggles for you! Only saving grace was that it wasn't the ram you had *just* got repaired. It's like every month something goes wrong with it! Lefort when!?

Excellent video lads 🚘🚙🚗👏👏👏👏👏👍👍👍👍👍

Always an enjoyable watch 👍

Just ring around and round up two new or even some reco second hand hydraulic cylinder rams , ring up some excavator or tractor wreckers and get a price,there has to be some ID or model numbers on the rams somewhere , it's probably going to work out cheaper and there will be no fail points, once you start welding on those rams there never right

Another GREAT VIDEO Guys 👊😎🇬🇧

Great content chaps keep them coming!

All good stuff big shout out to bodger and badger, big respect 🙏

Explodes

Can't you use that where the wall fell down in the heavy rain . You had that big 40 caravan sat there . Has another way in ! Can you send an aerial shot of the yard please

Great video again boys and content loving all videos keep up the great job you all.do

Brilliant video and nice to see marky boy....

Nice to see Marcus 😊

You've got a great staff fella's

‘Absolutely solid’🤣

Marcus👍

No need to pull the whole ram out of the Bailer all you need to do is unscrew all the bolts off the end gland and pull the rod out of the ram, undo the pipes to relieve the pressure to pull it out but no need to pull the whole unit out.

Another great video guys 👍

They rams could be off an old caterpillar dozer or possibly a 7.5 t dumper truck especially because the length of it

No bodging when Baz and Cal do the repairs so put your hand in your pocket John, James don't bodge it. Good to see three ton doing the roof fore the engine shed. 10 acres and a roundabout!!! keep dreaming it might happen one day

Dean and Luke are like David and greengrass off heartbeat

Nice and early lads brilliant keep up the good work xxx

Marky boy needs to be persuaded back to the fold get the 💷💷 out lads to ween him back to Baxenden. ❤

Defo need a hot drinks vending machine there. You'd make a ton off all those brews

O yes polished concrete

All the legends on this channel!. But where’s Zoe

do you still have the mill in haslingden if so can you do some more vids up there

Yard Good job boy

Honestly guys , one good wind and that roof is going skyward, seriously 😢😢

Did you leave crap all over the bailer floor so Baz and Cal couldn’t see the welding John done.?? 😂😂 Tell 3 ton to hold the camera up when he talks into the camera so we don’t have to stare up his nose.👃 😂

(Original Greatest Of All Time) and (Greatest Of All Time)

Good video guys 👍👍♻️♻️♻️

As a concrete finisher polish floor scrappy av heard it aw noo defo scrap game is paying well ffs 😅😅😅😅😅😅😮😮

You know itll be right with Baz & cal on the job......do a good job once not a shit job multiple times....false economy

Unbelievable lad

Get it fixed properly use the main man welderfaber then it will last you can’t cut corners on machine repair don’t tell John the bill

Love it 💖

Now with baz from welder fab that's a professional welder fabricator and knows about hydraulics as well if he can't help can't sort it no body can look after dean and luck the ones you call the Messer's as them keep you with plenty of vehicles I think you find your are the Messer's the many times they try getting hold of you 😂🤣 over scrap vehicles like the good forktrack he rang you no answer the boys sold it and you missed out and you moaned about it

Could it be worth going to investors to aid with getting new equipment and driving the business even further in general?

That lean-to seems so sketchy it’s given me the heebie jeebies since James first talked about it.

Epic 😊😊😊😊

3ton number1 and doing top job, until he starts destroying things again.. 👍

That thing wants weighing in its bin nothing but trouble since you had it

Sorry James, Dean couldn’t possibly be tight with that figure , you must be the tight one 😇😇😇

haaaaaaa Sunday's

4 k hell 😂😂😂😂😂

Should have got John Astley to weld the baler ram bearing 😂😂😂😂😂😂😂

👍🏼👍🏼👍🏼

Is that a navara rear end on the top of that container ?

What camera are you guyas using 🇬🇧

👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻

-27:09 / 47:33 white insignia. Need rear lights, front lights and a few other bits. Could you reply to me and I’ll send my number so we can arrange a price for purchase and delivery. Thanks

Get Marcus back under your wing one of the Originals head full of experience

sell me your bikes u messer