Рет қаралды 32,309
In this video I go over the process I use to replace the valve cover gasket set on the 2012-2018 Ford Focus equipped with the duratec N/A 2.0L. I even go over a few tips and tricks that I've learned over the years of doing these valve cover gasket replacements.
Note: Please use caution when performing this service to your vehicle and use care not to get any foreign materials into the engine in the process. During the process of cleaning the mating surfaces I used a green scouring pad. These pads can shed fibers that can potentially get into the engine.
Note: Use any and all methods shown in the video at your own risk. As noted in the video I used my screw driver incorrectly as a chisel. Also, using a razor blade or a pocket screw driver on mating surfaces could potentially damage the mating surface which could result in leaks. However, if you were to scrape or damage your mating surface RTV could possibly be used in those areas to give you the forgiveness you need.
Note: When using RTV, you only have a short time to get the valve cover on and bolted down securely from the time the RTV is applied. The RTV should still be wet after the valve cover is bolted down securely.
Note: Over tightening the valve cover bolts can cause them to break. Do not over tighten the valve cover bolts.
Brake parts cleaner was used to clean the valve cover it's self.
Also, when ensuring that the valve cover gasket has not been knocked out or scraped out as shown at around the 29:00 mark, be sure not to rake off the RTV that was applied to the cylinder head earlier. If the RTV has been raked off, by your fingers, the valve cover must be removed and RTV reapplied properly.
Warning!! Use care when working around the low pressure and high pressure line at the high pressure fuel pump toward the rear of the valve cover. You will be working very closely to these and it is possible to damage these lines by being too rough around them. BE GENTLE when removing and installing the valve cover.
For tool reviews and product recommendations by Barbour's Auto Help visit my store front on Amazon by clicking the link: www.amazon.com...
Discloser: As an Amazon affiliate I make a commission on qualifying sales.
DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses, protective gloves and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbour's Auto Help, Barbour's Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour's Auto Help makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual. Verify everything with your own research.