For me, the ideas in kzfaq.infoUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

Thank you so much. I have been working on my condo remodel and some walls are not 45 degrees. Was ready to call someone to do the trim but you saved me. This is from a female...63 y/o. You are kind to post this.

Where were you when I was doing my baseboards? You make life easy.

I will now re-name my two oldest Sawdust and Wood. Thank you.

Thank you for keeping it straight to the point. Hate seeing videos where dudes start with all sorts of production, talking about the weather, their wives and mistress. Got my subscription… I don’t do so many. 👌

Your 3 videos explaining how to find inside and outside angles without an angle finder or protractor are great! Short and concise and really easy to understand. Thanks for these!

best video on youtube "old school you ca't beat it"

Yes sir, I am old school and used this method all my life until these fancy angle finders came into existence. Thanks for the video I always enjoy the old school methods.

Thanks for sharing this great tip.. It will save me a bunch of time..😊😊

You made it nice and easy for me to understand it and Lord knows how much I was trying to learn that on my own. Thank you, sir!

THANK YOU!!! I had seen a tiktok about this a while back and ive been looking all morning for something similar. this is exactly what i was looking for. Thank you again!!

Thanks! Just tried this today and worked like a charm. My husband tore out our remodelers' baseboards because the joints and caulking were sloppy. With this technique my husband's joints were perfection!

I knew there had to be a way to get it right. I STRUGGLED with this over the weekend, not anymore! Thanks!

Brilliant. Thank you. It's this kind of stuff I forget from my school years...

Brilliant. Technology is helping us forget some of our old school tricks.

- Another very useful, practical way to make angles without having to spend "oodles" of money. Thanx 4 sharing.

Been looking for the info on outside angles and now I found it. THANK YOU SO MUCH!

AMAZING!!! I will definitely use this method from now on! Thanks SO much. I feel more empowered using my miter saw.

Always one of my favorite lessons and one of your earlier videos I go back too. Great

Holy Cow! This is amazing, I'm doing stain-grade molding in a bathroom, and I'm scratching my head trying to do these cuts, I see this and I'm blown away!

Clearest video on this I've seen. Excellent

Brilliant, simple, no-cost - my kind of stuff!

I’ve been wondering how to do this without an angle finder. Can’t wait to try out this technique!

MAN, I wish I'd seen this BEFORE I cut my fascia boards for my deck, (which will now need a bit of wood filler and sanding to fix up!!!! Great tip!!!

Wish I had watched this early this morning before I spent the entire day working on the trim for my staircase!

I’ve struggled with cutting these angles the s video has made it so simple for me thank you so much👍👍💙

Sir......Thank you. Doing my own baseboard. First time. And was having bit of an issue without an angle finder. Thanks again. God bless.

Funny, I've used this method earlier today and worked pretty well . Works for inside and outside wall. Make sure you trace your line correctly otherwise your miter will be off

Thanks for all your practical tips!!

Great trick, looked it up today at my job, thanks again!

You’re the best ! Always make my jobs faster with your tricks !

Dude, you are the MAN. Nice video. Simple and easy to follow. Thank you X 10,000

Incredibly helpful. Thank you!

That was awesome, thank you for the schooling.

You didn’t need an angle finder cause the angle found you! Thanks for the tips!!!

Wonderful tip ! Thank you!

Thank you!!! I took this example and applied it to my table saw to cut boards 20 inches by inches and it worked!!!!🔥🔥🔥🔥

Brilliant, I have learnt a new skill, keen to try it out. In my experience, I've never seen a true 90 degree external corner.

Stay strong, brother. Why aren't you teaching young folks? Thanks for sharing with us. The best part of the tip, which you didn't mention was how to cut both sides by leaving the same side of the base along the fence and just rotating the miter to the correct angle. Best to you and your family. Love the corona haircut.

Nice! Nifty trick. I'm sure it will come in handy. Stay Safe and I hope your kids are doing well with remote learning.

Súper helpful tip! Thanks for sharing 🙏🏼

Well done, very helpful, sir!

Thank you for making it easy and simple!

Such a game changer for me, thank you.

That’s what I needed to know. Thank you

Thanks for the video, Very well done and simple.

Will it work the same for an inside corner?

Definitely going to use this method once I get my mitre saw set up. It seems so simple & accurate. Just have to keep it tight or you’ll be off by a degree or two. Then the caulk comes out.lol

Great tip!

Am I the only one who tried to look around the top of his head 0:55 to see how he did it...... Great vid ....I've definitely stored this tip in my mental toolbox.

Good video mate. Straight to the demo.

Thank you! SO helpful and worked perfectly.

So appreciate the free tips! Thanks!

How do you do that if it's an inside corner?

This is awesome thanks for sharing!

Thanks for the base tip...helped me out a lot!

Excellent tip. I'm a day late on watching this video. Had to track down my angle finder.. lol...

Slick trick! Thank you.

Straight and to to point, thanks!

I’m gonna try this. I hope it works out for me cause I am NOT having any luck! Thanks so much for sharing! 🤝

Excellent Tip, Thank you, I needed that 👍🤗😊

Dude, this is great! Thank you

Quick and simple great video brother

Great Vid fam thanks for the knowledge!

Brother I’m literally on a job n you just saved the day thanks so much 👍

Good stuff... Thank you!!!

Nice! I was wearing myself out yesterday trying to figure that out lol 😆 good job

First time seeing this method and it's awesome because i almost gave up on cutting braces for my shed

Sick video me heads been falling off about doing this for the first time well in mate thank you

Great job and good thinking God continue to bless U

Very nice, informative, video. Thanks.

Excellent video!!! Many thanks!!!

Good man ,great work 👏

Wow! I'm gonna try this! Thank you!

Thank you!! Perfect explanation!

maaaaate! this is the best angle cutting video on the net, fact! thanks...

Awseome...thx...whats the best blade for cutting BBs?

Thank you so much for your videos!!!

Excellent thanks for the advice

Thank you for the info. Do these same principals apply to Crown Molding installed from a straight wall to an angled wall and back to a straight wall other than the Crown Molding on the Miter Saw inverted? This is a corner built in and need to install Crown on top. Could you provide your insight to this? Have you made a video similar to this one that covers Crown? - Thank you

DANG EASY BUTTON !!! YOU DAA MANN!!!!!

Love your channel

Thanks for this amazing tip.

Thanks! Awesome tip! 👍👍👍

Again God bless great job.

This is amazing!! Thanks

Thank you! This saved me so much time.

Good tip👍✌️😊🙏🏼⚒⚒

Does it work the same for the internal angle? No worries... I just found your other video that covers it! Just brilliant. Thank you.

Beautiful

EXCELLENT TIP! IF THE ANGLE IS ODD (NO PRE-SET DETENT) MAYBE YOU CAN TURN THE LAST CUT UPSIDE DOWN, AND NOT MOVE THE MITER SAW? NOT SURE IF IT WILL WORK, LET ME KNOW WHAT YOU THINK.

Thank you for this video.

Thanks for making it so simple that even I can understand it. You just saved me 20.00+. Can you explain to viewers who don’t know that there’s a situation where you cut the wood standing up and others flat down? I know baseboards and ceiling crown molding are cut standing up, can you elaborate further?

You are sick! Thanks bro

Great tip👍🏻🇬🇧

bloody hell mate that's genius !!! thank you so much !!

Top Tip, from Algarve Portugal :)

Great video sir

is it the same for inside corners?

Thanks for sharing this tip. Hope you and the family are doing well during this COVID-19 crisis. Take care. Stay safe. Keep the faith.