Freestanding Soaking Tub - Easiest Way to Install l PLAN LEARN BUILD
Рет қаралды 219,517
Күн бұрынA freestanding soaking tub really can be an EASY installation with the right guidance. If you do not have access to plumbing below, a drop-in tub rough-in drain assembly will simplify the installation. In this video I will demonstrate the installation of both a free-standing tub & tub filler. 👇👇👇👇
For all of my BATHROOM REMODELING COURSES and other great resources for bathroom remodeling, visit by website at www.bathroomremodelingteacher...
🎁Affiliate links to products & tools used in video (appreciate anyone purchasing through these links. This helps out my channel tremendously-thanks!)
👉Visit my Amazon Storefront to view and purchase all of my recommended items to help you BUILD: www.amazon.com/shop/bathroomr...
👉 🛁 60" Soaking tub by Vanity Art - amzn.to/3rnE1FD
Moen 90 degree freestanding tub filler - amzn.to/3Bh8PMG
Moen 90 degree rough-in for tub filler - amzn.to/3BpB7Vd
Drop-in tub rough-in drain - amzn.to/3hU8iZB
Rigid pex tubing cutters - amzn.to/3kBl5BU
🎥🎥For more videos on this bathroom renovation:
Easiest way to build a curbless shower - • The easiest way to bui...
Easiest way to build a corner niche - • The Easiest Way to Bui...
Heated floor in a shower - • Heated floor under til...
Ditra heat testing - • Ditra Heat Wire Testin...
Floor leveler over Ditra heat - • Floor Leveler Over Dit...
Waterproofing a curbless shower - • Waterproofing a Curble...
Tiling a curbless shower - • How to tile a curbless...
Tiling a shower wall - • Tiling a shower wall l...
Tile a shower (accent wall) - • Tile A Shower l PLAN L...
🛁Free standing tub install - • Freestanding Soaking T...
Measuring glass shower doors - • Custom Glass Shower En...
Installing custom glass shower doors - • Custom Glass Shower En...
🎬Follow these steps for a successful installation:
0:00 Freestanding soaking tubs are easy to install - Intro
0:16 Install Moen Rough-in drain body - Moen 90 degree tub filler
0:48 Set depth into floor for rough-in valve for a free standing tub filler
1:18 Position rough-in valve for freestanding tub filler
2:02 Connect water supplies to a rough-in valve for a free standing tub
3:00 Move plumbing for a freestanding soaking tub - How-to
4:51 Install a drop-in (rough-in) drain body for a freestanding tub
5:46 waterproof around a drain for a free standing soaking tub
6:22 Install freestanding tub filler into rough-in valve - Moen 90 degree
7:17 Set soaking tub feet level for a freestanding tub
👉Follow me:
Instagram: / bathroomremodelingteac...
Facebook: / bathroomremodelingteacher
Tiktok: www.tiktok.com/@bathroomremod...
Twitter: @bathremodeltchr
LinkedIn: / steven-white-9a30a534
Pinterest: www.pinterest.ph/bathroomremo...
www.bathroomremodelingteacher.com
#soakingtub #bathroomremodeling #remodel #bathroomremodel #bathroomremodelingteacher #shower #plumbing #diy #remodel #renovation #construction #homeimprovement #homerenovation #bathroomdesign #tile #work #stevewhite #tipsandtricks #tutorial #howto #youtubetutorial #interiordesign #tiledesign
All videos, audio, commentary, recommendations, advice, techniques, and any other information (collectively, “Content”) provided by Bathroom Remodeling Teacher, Inc. is provided for educational, informational, and entertainment purposes only, and is not intended to be a substitute for the services of an in person, licensed/professional contractor who can review and assist with your project. Do it yourself (“DIY”) projects can be risky to people and property, and you rely on any Content at your own risk. Bathroom Remodeling Teacher, Inc is in no way liable or responsible for damage to property and/or harm to you or anyone else as result of you relying on and/or using any Content. Bathroom Remodeling Teacher, Inc makes no claims or promises that the Content will be safe and/or appropriate for a specific DIY project, or that your completed DIY project will resemble or match any completed projects featured in the Content. The Content may not be appropriate for your age and/or skill or experience level. Bathroom Remodeling Teacher, Inc does not claim or promise that the Content is in compliance with any or all applicable laws, regulations, codes, or other legal requirements. You are responsible for all legal issues, including but not limited to, any required zoning or other governmental permissions and inspections related to your DIY project. Any materials or tools featured in the Content may not be suitable for your DIY project, and Bathroom Remodeling Teacher, Inc makes no warranty or representation as to the quality, fitness for purpose or merchantability of any such materials or tools.
@jfitzikner9 2 жыл бұрын
Finally a video where everything's right! As a plumber I can appreciate every aspect of thise video, even the thin set work cause a lot of our tile guys mess up those drains haha definitely be recommending this video to our new guys! But as a heads up I've had the tailpiece dislodge the rubber gasket on different brand drains so I've started using a little dawn dish soap on the rubber as a sort of "lube"... once again great video 👍🏻
@BathroomRemodelingTeacher 2 жыл бұрын
Thank you! Appreciate it. Thanks for the tip. I actually might use a Schluter drain on the next one. I’ve heard there’s a bushing that works for that too. Would be a better waterproof drain that way and be cheaper. 👍
@chipburns4123 2 жыл бұрын
Can you use all purpose glue for ABS, PVC and the grey stuff? I hope so lol 😅
@richmoore942 3 ай бұрын
Hey genius tell me I see you moving that tub around pretty easily what keeps it from moving or tipping over after you slide it in the drain seems to me like somebody walking over or trying to clean over top of it would just move it spin it around have it tip over looks like a safety hazard to me see I installed mine I took the feet off the bottom and I drilled holes through the floor and bolted it down I don't understand how you can keep that tub from not moving without doing that
@4315chris 2 жыл бұрын
Steve, you are the real deal here. So glad you decided to continue making videos on your own. I value the real world applications and challenges you show us, which in turn helps validate what I do on my renovations. I think the HD quality and overall organization of your KZfaq content is outstanding as well. You found the right person to help there. I look forward to more future content.
@BathroomRemodelingTeacher 2 жыл бұрын
Thanks chris 👍 that’s one thing you can’t duplicate in a mock up…..real world scenarios.
@readmore3634 2 жыл бұрын
Great video....I've installed quite a few of these....over a dozen on concrete.... More difficult depending on the brand. But I recommend bench testing the drain assembly with about 5 gallons of water in the tub on a couple of saw horses and get a visual on it....especially on a 2nd story bathroom. Also, no real need to silicone the tail-piece flange nut but a thin coat of lubricant on the surface of that brass tail-piece so it slides in smoothly. Put some channel locks on that flange nut too...hand tight isn't all that tight sometimes. A concrete install on the free standing faucet is a whole video in it's self.
@splanzza Жыл бұрын
Just yesterday went to quote a job and customer wants self standing tub. So look who I found to clarify things?! BRT to the rescue. 👊👍💪
@markwaugh2613 2 жыл бұрын
Excellent video you did everything correct even that free soaking tub drain the only thing that I do is I use some caulking on the bottom of the tubs to kind of stick it to the floor cuz I don't want anybody to bump it and move it out of place
@nikkiwhite5504 3 жыл бұрын
Great technique! Thanks for the informative instruction! 👍
@markfarris3958 2 жыл бұрын
Appreciate your craftsmanship. Thank you
@deplorablechump8758 2 жыл бұрын
I’m installing a freestanding tub. Little to no plumbing experience. This video helps. Hope I don’t screw up!
@SteveG_RN 2 жыл бұрын
Great video. Thank you for taking the time to show us how it's done right. I am just starting the bathtub portion of the master bath DIY remodel. Got a quote for $32K to remodel our master, so after put my eyes back in head, I found your videos and realized I can do this. I've been watching your videos for months now, making sure I know what I am doing. I also appreciate the comments down below, real hardworking guys giving you compliments says a lot about both your skill and your knowledge. As a former video production guy, I would recommend raising up the volume on your video's. It might be my computer at work, but it feels a little hard to hear. Or maybe my nail gun is blowing out my hearing. Either way, your work is solid, and I and a lot of other DIY'rs are grateful.
@LightGesture Жыл бұрын
Wet areas aren't the place to DIY. 32k all in is fair for a good sized bathroom with all of the materials that go on to a real custom bathroom... #ResonateNebraska
@lj4434 Жыл бұрын
Very simple and straightforward thanks
@erikrezlman7900 2 жыл бұрын
Great video and thanks for your knowledge and sharing!!
@SuperBCHEDDA Жыл бұрын
Thanks for this well put together video now im ready to install my tub
@danfoster9604 2 жыл бұрын
I find these videos great for any new product I am considering. Even if I hire out I know the product costs and have an idea of what the labor will be...before I start picking items. Another great video!
@jimcooney6107 2 жыл бұрын
Excellent video thank you
@128file 2 жыл бұрын
Great video I need to get that drain assembly for a job installing one of these tubs thank you
@walusimbiharry4534 2 жыл бұрын
Well explained thanks alot
@stevem8535 2 жыл бұрын
Earned my like and subscribe. I was installing my tub today and couldnt find any good info on how to connect the the tail piece to the drain pipe - same brass pipe, nut, and o-ring you have. I saw your method of putting silicone on both side the o-ring and rolled with it, plus put some more underneath the nut where it meets up with the tail pipe. Will drop it in the island drain tomorrow and hope no leaks!
@nicko5566 9 ай бұрын
Great video / how to as always!
@wc6975 Жыл бұрын
Excellent information here.
@fengzhou322 Жыл бұрын
Thanks!
@bubashalom8274 Жыл бұрын
Yeah! Thanks much
@chipburns4123 2 жыл бұрын
Im glad I watched this. Now I know where that blue cap came from. Too late now lol
@cramac130 Жыл бұрын
Great video. Thank you for your time and knowledge. I have one question. What keeps the tub from moving when there is no water in it. It seems the rubber gasket around the drain pipe is the only thing holding it. Is there no way to ensure it doesn’t move? Clips or glue?
@jeremymanley5791 7 ай бұрын
That would be my complaint cramac. Do a good bit of plumbing and I was wondering what legit plumbers use to hold it down apart from silicone or foam and filling the tub. Seen it done both ways. Everything else is very well done.
@hakanyldz3721 Жыл бұрын
This little kzfaq.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
@HelgeHornis Жыл бұрын
I like the fact that you show how to seal the tub drain docking piece. Thanks. But, what to do do to seal the floor where the tub filler is located? Looks to me as if there is no way to assure that any water that gets out of the tub (i.e. children are having a good time) will not end up leaking into the floor. Any comment would be appreciated.
@PHILPANZO 11 ай бұрын
Any info on this? Great question
@clkny 11 ай бұрын
Amazing. A related question: is there any need to reinforce the floors/joists if I’m putting it into a bathroom on the second floor?
@williamhunter658 Жыл бұрын
Great video!! One question though, what was your distance from tub drain to faucet, the rough in measurements. Is that pretty standard?
@stevenhecht1787 Жыл бұрын
Do you need to apply primer before pouring the self leveler?
@davida8052 2 жыл бұрын
This might be a dumb question but what is holding the tub to the floor? I know the drain is in the rubber fitting but I would think that would be enough to stop the tub from twisting is someone bumps the end of the tub. I guess if you silicone around the tub base that might hold it a bit but surprised that is it.
@uniqueelectricalplumbing3703 2 жыл бұрын
You can use grease or oily someting for rubber gasket Then it will go easily inside and there is no chances leaking or getting rubber gesket cracked
@Skeeterpfr Жыл бұрын
So how do you secure the tub to floor without it pivoting on the center drain? What secures it so it doesn’t move?
@somethingkindawonderful3034 10 ай бұрын
Hi quick question ... What is a flexable drain ? Dpes it give one some leah way to where the tub can go ( if the floor drain is in the wrong spot ?
@Pure3nrg Жыл бұрын
How does the tub not move? I get it's anchored in the center, but if you push it on either end won't it pivot/twist? Why not silcone the bottom?
@karikrumlauf4696 2 жыл бұрын
Once you have it level and good to go, do you caulk around it? My plumber suggested we grout it and that feels extreme. Looking to know what’s best.
@BathroomRemodelingTeacher 2 жыл бұрын
Oh, I don’t know about grout. That would definitely crack after a few times using it. Silicon the whole back gap if your worried about it moving. Would be tough to make look good going all the way around though. I siliconed the feet and a few dabs behind it
@anthonyciciarelli1559 2 жыл бұрын
Great video! Quick question because I am in the process of redoing my bathroom with that same exact drain. Should I put Teflon tape or plumbers putty on that crew connection. I notice you did not but just wanted to be sure.
@BathroomRemodelingTeacher 2 жыл бұрын
I used silicon in this one. But with the stainer sleeve technically it shouldn’t need anything. But no way of telling a leak once you set the tub 😆
@Bryant-zp1vq 11 ай бұрын
great informative video! Question I recently purchased a house that has a similar tub and am wondering if I need to figure out how to secure it to the bathroom floor. It doesn't rock but it can be fairly easily "moved or rotated" when empty by just me. Is this something you would recommed? Thanks in advance
@kkp4297 10 ай бұрын
buy several tubes of clear GE silicone. Squeeze it in the gap generously. These cheap plastic tubs are not like the heavy tubs which are too heavy to move. Silicone is the only way to secure these light tubs. Otherwise you end up with a cheap mickey mouse tub.
@wetsaw7869 3 жыл бұрын
Not long you have 200K I predict.
@BathroomRemodelingTeacher 3 жыл бұрын
I hope so, 😆 just need the algorithm to pick things up! Thanks 🙏
@franloza7551 Жыл бұрын
can you tell me which is the piece that goes to the respirator please I need to buy that piece of respirator thanks
@controldenada Жыл бұрын
How far from the wall the bathtub should be if you want to seal it?
@adamdavis2274 Жыл бұрын
Thank you for sharing, nice work. I feel this design is bad news and designed buy someone who has never fitted a bath , lots been sold in the uk now but no instructions or accessories like your drain setup.
@gnarlybark 2 жыл бұрын
Hand tightening = Always a great idea to avoid problems! 🤣
@cohenkevinloriqueen818 Жыл бұрын
Im pretty sure that I would have gave it a quarter turn with a wrench !!
@dailodai9586 2 жыл бұрын
was it needed to water proof over self lever even after you installed the dirt membrane ?
@BathroomRemodelingTeacher 2 жыл бұрын
Yeah for the shower area out at least 3 ft. With kerdi membrane 👍
@richmoore942 3 ай бұрын
Tell me how you keep that stuff from not moving tipping over or being adjusted in any way shape or form when I installed mine I put bolts in it I took the feet off and used washers and nuts and bolted it to the floor I don't see how else you can do it without it being safe I guess the truth do you guys use is to have the tub for water so it doesn't move
@team2146 Жыл бұрын
So U don't caulk between the tub and the floor ? Tub is not gona tip over if U lean on it ?
@KRM_2010 Жыл бұрын
Wondering where you bought your pex crimp tool? Seems like a pretty expensive one. I suppose this is not a tool to skimp on. Thanks
@PHILPANZO 11 ай бұрын
How do you waterproof the floor where the tub filler is? Drain is sealed tight but tub filler is not
@petes3151 Жыл бұрын
So these drains actually 100% seal when you put the male piece into the female? If not it sure seems like a leak point if your drains backed up..... I like these for minimal access situations but I think if you have access use hardline abs all the way and it's cheaper.
@markwright1945 Жыл бұрын
Have you installed a freestanding tub faucet that does not use a flange mount, just connects to 1/2 mip below the floor level?
@TheStarQueenCrafter 2 жыл бұрын
It took me exactly 5 seconds of this video to realize I’m out of my depth with this project 😅 Hiring a professional
@xungngo Жыл бұрын
Oooo at 6:56, not good for us shaky hand folks because if that screw/washer/nut drop it ain't coming back up.
@davidg5329 Жыл бұрын
What stops the tub from sliding or moving once in place
@potpapi1275 Жыл бұрын
Add silicone under the base lip edge of the bathtub all the way around before setting into place. just keep a 12in gap behind tub center clear of no silicone so if u ever have a leak it can still be detected. if you silicone all the way around the tub water will be trapped under if there is ever a leak and you won’t be able to tell till it completely damages your floor
@dr.m-beenzunamwiinganakazw9106 2 жыл бұрын
Hi, where are you located at?
@kkp4297 10 ай бұрын
everyone is asking the right questions. These crappy light tubs move around if you don't use a lot of silicone to secure it to the floor. The best way to secure the tub is to have blocks secured to the floor that act like a curb. The blocks sit inside the hollow area under the tub. Dry fit the tub, use a marker or tape the outline of the tub on the floor, remove the tub again, and put a SHIITLOAD of clear silicone where the base is going to go. You need to use lots of silicone, not just a bead on the outside, to secure the tub to the floor.
@cooperdog9956 Жыл бұрын
What holds the tub in place?
@andrewarbogast1 8 ай бұрын
I’m trying to remove my stopper to my freestanding tub but it just keeps turning and doesn’t seem to loosen. Don’t they just unscrew?
@chipburns4123 2 жыл бұрын
Do you have to caulk under the tub where it meets the floor?
@BathroomRemodelingTeacher 2 жыл бұрын
I should of included that part. But I did add some on back invisible area of tub after it was set. These tubs are pretty light and easily moves without water in it. One thing I wish they did a better job of 👍
@anthonyjannace4410 Жыл бұрын
@@BathroomRemodelingTeacher I am thinking a dab of epoxy on each foot to hold the tub in place or at least lexel or a high-quality caulk.
@jamesrobinson5801 2 жыл бұрын
So nothing holds these tubs stationary? Is there models like this that can be fixed to the floor or heavy enough they won't move. I have a Family that extremely rough on EVERYTHING in our home and can see this going south very quick
@BathroomRemodelingTeacher 2 жыл бұрын
😆 I hear you! Yeah a lot of these don’t have anything….obviously filled with water it’s not going anywhere, but when empty pretty easy to move. I did silicon the back edge later on because of concern. I’ll have to research and see if there are models that can be fastened 👍
@mattsawesomeshow 2 жыл бұрын
Most tub manufacturers recommend a dab of silicone on each of the rubber feet prior to setting in place. Won't move anywhere.
@maryammohammad4566 10 ай бұрын
couldnt water that is splashed outside seep under the bathtub and cause mold to grow?
@kkp4297 10 ай бұрын
yes. that is why you need to use a generous amount of silicone to seal that gap. In fact, set the tub in silicone first. Don't wait till the end to apply the bead of silicone on the outside edge; that is not enough.
@landscapevision6553 2 жыл бұрын
Be a tuff job re routing the hot and cold line with a concrete surface...
@BathroomRemodelingTeacher 2 жыл бұрын
Yes, that would be much more challenging!
@a_badali Жыл бұрын
I was just scrolling the gram and this lady had a freestanding acrylic tub. However, she had a curbless shower with a linear drain. This tub was not attached to the floor and was movable. It had wall mounted faucet just like normal and drained within the shower. I haven't seen this done anywhere else, it was a huge shower, has anyone seen anything like this?
@chipburns4123 2 жыл бұрын
Arent you supposed to self level the floor first before the ditra?
@BathroomRemodelingTeacher 2 жыл бұрын
They are somewhat opening up to the idea now. Apparently there’s a specific Ardex floor leveler that is officially approved. Here’s their bulletin on leveler - sccpublic.s3-external-1.amazonaws.com/sys-master/images/hb7/h94/8963349053470/Technical%20Bulletin%20-%20DITRA-HEAT%20with%20Alternate%20Floor%20Coverings.pdf
@chipburns4123 2 жыл бұрын
@@BathroomRemodelingTeacher oh nice. What are the benefits to self leveling after the Ditra?
@BathroomRemodelingTeacher 2 жыл бұрын
@@chipburns4123 easier more accurate to get even with curbless shower. Certainly less work to fill waffle
@carlhenderson7254 2 жыл бұрын
So does the drain act as a coupling??? Isn't the drain 1 1/4 and the tail piece?
@BathroomRemodelingTeacher 2 жыл бұрын
Drain is 1 1/2” and the rubber gasket in rough in seals it 👍
@carlhenderson7254 2 жыл бұрын
@@BathroomRemodelingTeacher Okay, that's what I was trying to ask. The two at 1 1/2 basically meet in the rubber seal correct?
@Heidi12754 2 жыл бұрын
What tub is this?
@BathroomRemodelingTeacher 2 жыл бұрын
Vanity art Tub: 👍 www.amazon.com/gp/product/B075Q9BD7S/ref=as_li_tl?ie=UTF8&tag=bathroomrem0f-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B075Q9BD7S&linkId=2e9813707f1c682d3935a8dd1b32c659
@Heidi12754 2 жыл бұрын
@@BathroomRemodelingTeacher Thanks, love the look. In the process of building a home but can't change plans and will have to rip out the oval alcove they're putting in after we move in and hopefully this can work.
@ShootStraight84 Жыл бұрын
Can’t use self lever over ditra
@BathroomRemodelingTeacher Жыл бұрын
Ardex k60 with additive is approved
@ShootStraight84 Жыл бұрын
@@BathroomRemodelingTeacher that’s news to me , thank you .
@ShootStraight84 Жыл бұрын
@@BathroomRemodelingTeacher hey I just called Schulter and they said absolutely no self leveling over ditra , unless is for non tile installation over the ditra. Website says the same , so yeah sucks , still no self leveling over ditra :(
@seanmoon1444 Жыл бұрын
No sound
@margomerrifield909 Жыл бұрын
There are 6 not 5 leveling feet
@user-no2sh7ki3j Жыл бұрын
In Florida the drain, "IF" its not accessible. cant have the slip joint connections he's using, must be all sch 40 glue joint
@michaelparker5030 2 жыл бұрын
Hmmm, do I see 6 feet. 🧐
@BathroomRemodelingTeacher 2 жыл бұрын
🤔
@craigschafer1369 Жыл бұрын
I can't believe you rolled the tub over onto your knee pads.....no protection. Why?
@BathroomRemodelingTeacher Жыл бұрын
How dare I! I’m fired 😆
@craigschafer1369 Жыл бұрын
@@BathroomRemodelingTeacher nah dude I truly enjoy your videos. As a contractor myself I always say "optics" is important. If a customer sees me placing tools on a countertop it doesn't look good. Risk management is all I'm saying. Look forward to more videos 👍
@Leftmindblind 3 ай бұрын
Thanks!
Workshop Insider
Рет қаралды 278 М.
Mountain Plumbing Products
Рет қаралды 52 М.
BigXep. Канал озвучки
Рет қаралды 1,9 МЛН
Sok Kimleng
Рет қаралды 21 МЛН