Bed centering with Marlin Firmware 1.1.X

  Рет қаралды 98,096

Crosslink

Crosslink

5 жыл бұрын

In this video, I am explaining, how you can fix your bed centering with Marlin Firmware 1.1.X in a few simple steps.
Do this espacially, if you see that large prints are running over the edges so you need the full printbed's area.
*** Software used:
Printrun Pronterface: www.pronterface.com/
Arduino IDE: www.arduino.cc/
Marlin Firmware: github.com/MarlinFirmware/Marlin
*** Thingiverse links
Large Crosshair to validate printbed centering:
www.thingiverse.com/thing:228...
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for KZfaqrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 188
@AUTOM8
@AUTOM8 4 жыл бұрын
So many videos out there trying to explain everything in the shortest time possible which then misses the most important basics! It really is nice to find someone who knows how to get his points across. Working my way through your video now and had to comment, just purely due to you excellent explanations! Thank you and keep going!
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Thanks, always love to help!
@jamiecaudill9998
@jamiecaudill9998 3 жыл бұрын
I don't comment much. However, I wanted to show my gratitude for the great explanation. Thank you for the help.
@vn1500g3
@vn1500g3 5 жыл бұрын
Thanks! Really good information as always. Thank you for all your hard work.
@TheAstador
@TheAstador 2 жыл бұрын
@Crosslink Thank you so much, i center my bed with your video when all the people i know in the 3d printing area tells me to move my endstop sensor :)
@ManxHavenIOM
@ManxHavenIOM 5 жыл бұрын
Thank You for the tutorial. Was a great help to someone just starting out in 3D Printing. All best from the Isle of Man.
@TheDasFaust
@TheDasFaust 4 жыл бұрын
This is borderline ridiculous, the information I need pops up with your video for a 3rd time in a row. Now I know why I subscribed :)
@rogermaciasquesada7393
@rogermaciasquesada7393 4 жыл бұрын
Thank you so much for existing. I've been trying to solve this for more than a week and didn't manage to do it. Them your video showed up in my youtube feed and made my day. YOU ARE THE BOSS.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Glad I could help!
@garytoth8152
@garytoth8152 5 жыл бұрын
Great vid as always
@mattrewega3411
@mattrewega3411 4 жыл бұрын
Thanks, Excellent video. If anyone is doing this on an Ender-5, its (110 - (Screen Readout)) = (Home Postion) + 220 = Manual Home Position ... This video is for printers that have endstops at the front left (0,0) whereas the Ender 5's endstops are at the back right (220,220). You are basically adding or removing a margin to endstops to have the nozzle centered at (110,110). I have the Hero Me Duct with stock hotend so my firmware settings are: #define MANUAL_X_HOME_POS 223 #define MANUAL_Y_HOME_POS 209 I hope this helps someone because it took me a little bit to figure out.
@SebastianRamirezH
@SebastianRamirezH Жыл бұрын
You saved me man!!! I was confused because my bed does not move to the center, just a little hahaha.
@Lidocain777
@Lidocain777 4 жыл бұрын
This all makes full sense. I wondered why some large test prints were not centered as my slicer displayed them. Now I understand and will fix that too. Homing at bed center seems pretty logical to me. Great work, really. Clear and very instructive !
@bigeck24
@bigeck24 3 ай бұрын
You legend! thanks!!! 7 years I've had my tronXY printer and always had issues with it printing off centre, finally looked into sorting it and came across this!
@bryanbarry7635
@bryanbarry7635 4 жыл бұрын
Wow! I really wish I had seen this earlier. The other video's had me running down rabbit holes and I gave serious thought to going back to my original ANET A8 hot end and carriage from the E3DV6 that I had purchased. I searched Reddit and the assistance was not terribly helpful. You were right on the money and you were HELPFUL!
@DieFormel1desOstens
@DieFormel1desOstens 2 жыл бұрын
Das ist eine hervorragede Ergänzung zum Vodeo "Marlin Firmware 1.1.X - Probe Offset and Probe Bed Position Settings Explained". Funktioniert perfekt. Ganz toll - danke!
@victorwinkler2727
@victorwinkler2727 4 жыл бұрын
You just saved me from going completly mental, it is 3:00 in the morning and I have tried sooooo many things. Thank you so so much 🙏🙏🙏
@nikkolp640
@nikkolp640 3 жыл бұрын
Same story. 2.33AM. Just saved me.
@luis3657
@luis3657 3 жыл бұрын
Another one here, saved by the bell. Thank you
@RatchetBuildz
@RatchetBuildz Жыл бұрын
Thanks for the video i had forgotten how todo this. It works with the new marlin builds as well fixed mine on marlin bugfix 2.1
@MFEeee
@MFEeee 4 жыл бұрын
Thank you. Easiest setup and simplest explanation so far
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Thanks, always love to help!
@Niemand
@Niemand 3 жыл бұрын
Superb guide, really helped me dial in my DIY, even works for Marlin 2.0.6...this approach was even adaptable to calculate and pinpoint my BLTOUCH. Cheers from Germany.
@limanlemon
@limanlemon 4 жыл бұрын
You're a lifesaver, great tutorial/ guide!
@3dfxvoodoo
@3dfxvoodoo 4 жыл бұрын
thanks daniel, i change the hotend and carriage of my ender 3, your guide help me a lot. Cheers from Argentina
@MartinSidgreaves
@MartinSidgreaves 2 жыл бұрын
Thank you so much! This sorted out a whole load of problems for me. You're a ⭐
@callsignprofessor
@callsignprofessor 3 жыл бұрын
I was looking for a nice tutorial, thanks!
@bigginsmcsauce
@bigginsmcsauce 4 жыл бұрын
This has been an issue for me for too long now, and this was the clearest and most concise solution I've come across. Thank you.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Great to read you liked it! If you have ideas for other topics I should cover, just ask me to make a video about it.
@maloxplus
@maloxplus 3 жыл бұрын
Done at the first try! thanks a lot for the clear instructions!
@johnm.gerard1718
@johnm.gerard1718 3 жыл бұрын
Nice video and easy to follow
@ganapathyraman03
@ganapathyraman03 Ай бұрын
Absolutely thrilled!thanks!
@dasoul3710
@dasoul3710 4 жыл бұрын
Thank you so much. I struggled 2 entire days with changing firmware back and forth and now I finally have a centered nozzle again!
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Thanks, always love to help!
@richardklein5
@richardklein5 4 жыл бұрын
Thank you for a clear and concise solution not found anywhere else. Keep up the videos. They are extremely helpful foe a novice like myself. I’m getting into 3D printing for my surgical practice. From Orlando.
@DeputatKaktus
@DeputatKaktus 4 жыл бұрын
This tutorial finally pushed me in the right direction. My centering was waaaaaay out of whack so far. Up until this point this was never an issue because my prints were usually small enough for this no to be an issue. But with a bigger print waiting that will barely fit the print bed with 4mm to spare on either side, this needed sorting. I have an AM8 here which is running Marlin 2.0.5. The Y axis was sorted pretty quickly, but try as I might, the X axis never did what I wanted. It was always off about 30 mm to the left, no matter what I did. In the end I did not use the manual positioning option in config.h but the min_pos_x option. I eventually adjusted the positioning by trial and error and finally got the result I wanted and the printer is now centered properly. Big thanks from the Ruhr! :-D
@gianlucamurialdo1747
@gianlucamurialdo1747 4 жыл бұрын
Dear Daniel beautiful guides ... I'm following them all ... and I'm finding myself very well .. but I wanted to share with you my experience on the bed center ... followed the whole guide .. I did all measures..but the the only way to make everything work was to write the results in the section "x_min_pos" ..and also the test with repetier host was perfect center..I hope that changes on Anet A8 ... never end ... good work and thanks Gianluca
@luzerba
@luzerba 4 жыл бұрын
Hi Daniel, thank you so much for sharing your knowledge, this finally solved my centering issue! You are very clear on explanations and makes things much easier for us. Greetings from Brazil!!
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Great to hear!
@frankdearr2772
@frankdearr2772 9 ай бұрын
Great topic, thanks 👍
@richroa
@richroa Ай бұрын
Muchísimas gracias! Llevaba varios meses con problemas con mi impresora, he visto miles de videos sin solución. Gracias!!!!!!!!!!!
@thornleymarshalldesigns
@thornleymarshalldesigns 2 жыл бұрын
Thank you for this. I want to look at getting a BL Touch for my CR10S5 and I have to learn more about this coding and set up. I’ll be going through your videos with anticipation 😊
@barrywingler418
@barrywingler418 3 жыл бұрын
Thank you, Works great on marlin 2.0.x as well
@Mr.Titanium1911
@Mr.Titanium1911 3 жыл бұрын
Nicely explained. Thank you for tutorial👌🏻
@droneanna
@droneanna 4 жыл бұрын
Thank you very much for the video, was very helpful.
@TootEmCarMan
@TootEmCarMan 4 жыл бұрын
Thanks to you I now have Marlin working correctly (mostly). Top notch videos, easy to understand and extremely informative.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Great to read you liked it! If you have ideas for other topics I should cover, just ask me to make a video about it.
@TootEmCarMan
@TootEmCarMan 4 жыл бұрын
@@Crosslink3D Maybe a video where you tell what problems you have had and how you fixed them? A video like that could well help a lot of people.
@x_giedrius_x
@x_giedrius_x 4 жыл бұрын
thank You for the tutorial, Its really helps!
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Glad to hear that!
@kortt
@kortt 5 жыл бұрын
Excellent info! Gonna go do this right now. Thanks Daniel!
@Barak43
@Barak43 5 жыл бұрын
same here ! my nozzle is way off since i upgraded my carriage, and that video comes perfectly in time to help me ^^
@Crosslink3D
@Crosslink3D 5 жыл бұрын
Mind reading?
@willswings
@willswings 3 жыл бұрын
Big big thanks !!you've explained it very well, now my little Anet is at the top ;-)
@juniorshbr13
@juniorshbr13 3 жыл бұрын
great video thank you very much for what you do
@3lmo2004
@3lmo2004 3 жыл бұрын
THANKS SO MUCH! VERY HELPFUL
@ChrisLee-UK
@ChrisLee-UK 2 жыл бұрын
Subscribed M500 Perfect, been struggling all day to centre my prints, you solved it for me. Although I didn't configure the firmware then flash, I used Prontoprint's console and entered the correct numbers following your calculations and now my prints are mm centred :D Was annoying having to grab the wipe line with tweezers as it was about 5mm over the edge. Not any more, thank you :) Now to sort my E steps, off you watch another video of yours :D Many thanks from Cornwall, England :)
@DimitarSavov87
@DimitarSavov87 5 жыл бұрын
I just upgraded to bowden and changed my carriage and hotend and this video is spot on! Just what I needed! Thanks a lot, Daniel!
@Crosslink3D
@Crosslink3D 5 жыл бұрын
Bowden is also on my list. What setup did you use? Can you post a link?
@DimitarSavov87
@DimitarSavov87 5 жыл бұрын
@@Crosslink3D Hey man! J-Head - E3D V6 Clone Black Diamond Bowden www.thingiverse.com/thing:3154420 (but I do not recommend it!) Bowden Extruder Mount www.thingiverse.com/thing:2146021 Anet A8 X-axis R1 www.thingiverse.com/thing:2227422 I am planning to switch to those two: www.thingiverse.com/thing:2193695 www.thingiverse.com/thing:3583021 (The X-axis holder, because my original distance between the two X rods was 46mm and in most X carriages the distance is 45mm, so I thought to go for 45mm straight away since all in the future will be 45mm anyways...) Cheers!
@Evilslayer73
@Evilslayer73 5 жыл бұрын
Nice tutorial Daniel:)
@Crosslink3D
@Crosslink3D 5 жыл бұрын
Thanks! :-D
@Taffy7974
@Taffy7974 4 жыл бұрын
Hi. I’m glad you made this clip as I’m deaf and visual is better rather read. I converted mine Geetech Prusa I3 B Pro from wood to AM8 metal frame. Now it is off centre so this will help me. I don’t think my GT2567 board is flashable but I will try. 👍
@Blobafatt
@Blobafatt 4 жыл бұрын
Thanks Daniel. Yet another fine tutorial of yours that is clear and easy to follow, and more importantly, successful! However there was 1 strange thing that happened at the point where in Pronterface you put in the code "G0 X110 Y110 Z2" and hit "send". For some reason the nozzle didn't move to the centred position. Rather than panic I decided to click home and try the "G0 X110 Y110 Z2" command again and this time it centred perfectly. I repeated this numerous times to make sure that it centred again which it did each time. Just thought I would let this be known in case anyone else also experiences this and starts to worry that they have done something wrong.
@germanmuller3111
@germanmuller3111 3 жыл бұрын
Perfect!!!! thanks!
@musikmaker19
@musikmaker19 4 жыл бұрын
Very helpful, thank you.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Glad it was helpful!
@marcduguay9985
@marcduguay9985 3 жыл бұрын
Great Video you solved my problem :)
@Crosslink3D
@Crosslink3D 3 жыл бұрын
Glad I could help
@henryprobosantoso473
@henryprobosantoso473 5 жыл бұрын
nice video, i like it, very helpful GBU
@jpcme2002
@jpcme2002 3 жыл бұрын
one more fantastic video, thanks a lot Daniel!!!
@Crosslink3D
@Crosslink3D 3 жыл бұрын
Great to see you like it!
@jpcme2002
@jpcme2002 3 жыл бұрын
@@Crosslink3D cannot be better!!! Your tuturials are fantastic... it´s impossibel to not understand, keep the good Job!!! ( to be perfect in my case is to acomplish to upload the Marlin 2.0... with time I arrive there ;) )
@manosm1
@manosm1 Жыл бұрын
PERFECT!!!!
@Pa55ion
@Pa55ion 4 жыл бұрын
Great video, my X is 110 and Y is -18
@Chad_D
@Chad_D 4 жыл бұрын
Dude I thought my printer was broken, I updated firmware and made changes for offsets with BLT, my prints have never been centered since.. I just dealt with it the best I could.. I went as far as trying a SKR DIP board, SKR mini, and now on the Creality 1.1.5, nothing worked. Watched your vid, and I am back to printing dead center!! can't thank you enough.
@instalelektrobbvlado9119
@instalelektrobbvlado9119 5 жыл бұрын
Daniel thanks for this video tutorial. I changed the extruder for the E3D V6 and didn't have the exact center on the hotbed. I did everything as in your manual and it's okay now. All your videos are useful to me. Also flash to MARLIN firmware according to your instructions 100%. I have two ANET A8 printers and I am happy with them. Thanks again. You are doing useful work. Sorry for my English.
@Crosslink3D
@Crosslink3D 5 жыл бұрын
Thanks for that comment. Highly appreciated!
@plasmaguy5
@plasmaguy5 4 жыл бұрын
How simple was that? you are the man.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
The Plasanator, thanks for your comment. Always appreciate your contributions. If you have ideas or suggestions on what I can improve or what videos you like to see, please tell me here in the comment section. Daniel.
@ravenor92
@ravenor92 4 жыл бұрын
Tolles Video, mach weiter so =)
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Danke!
@byseven
@byseven 4 жыл бұрын
Thanks a Lot !!! I was puzzle with this for a while . now it is DEAD Center !!!! Thanks a lot
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Great!
@byseven
@byseven 2 жыл бұрын
@@Crosslink3D 2years later this still helping me !!!
@alexkayman8483
@alexkayman8483 4 жыл бұрын
Thank you, kind sir
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Very welcome
@baugusto
@baugusto 4 жыл бұрын
Great!! Thank you.
@Crosslink3D
@Crosslink3D 4 жыл бұрын
You are welcome!
@angelSI2023
@angelSI2023 4 жыл бұрын
Good video well explained and easy.! THX
@Crosslink3D
@Crosslink3D 4 жыл бұрын
Great to read you liked it! If you have ideas for other topics I should cover, just ask me to make a video about it.
@angelSI2023
@angelSI2023 4 жыл бұрын
@@Crosslink3D Yes, I m making a new cheap prusa and bought a motherboard ramps 1,4 you Know, but after that I find some not good quality things "Mosfet" heating, finishing, So you can make a review for motherboards Cheapest and Better lets say, from 10$ to 60 70$ lets say. I looked Rumba 100$ to much, and al things in my country are 2 with 4 times expensive, its a suggestion only take it if you like. THX
@angelSI2023
@angelSI2023 4 жыл бұрын
@@Crosslink3D Yes, I m making a new cheap prusa and bought a motherboard ramps 1,4 you Know, but after that I find some not good quality things "Mosfet" heating, finishing, So you can make a review for motherboards Cheapest and Better lets say, from 10$ to 60 70$ lets say. I looked Rumba 100$ to much, and al things in my country are 2 with 4 times expensive, its a suggestion only take it if you like. THX
@MBrulla
@MBrulla 4 жыл бұрын
Great video. Was at 665 likes and...I couldn't help myself.
@cnc3-in-1
@cnc3-in-1 2 жыл бұрын
I just added an auto bed leveler to my CR10 S5 and flashed the latest Marlin software to my printer. The auto leveling works fine, but now my nozzle auto homes at the end of the print and squashes my prints. I am using Prusa and here is my end Gcode - start code //{if max_layer_z
@gasparrossello4233
@gasparrossello4233 4 жыл бұрын
Can be done using GCODE M851 X-50.0 Y-10? Thank you!
@kenmorgan4125
@kenmorgan4125 2 жыл бұрын
I need help purchased a t22 pro max plus and its sartinginfront and is not listed on cura
@Rj-Kmilo
@Rj-Kmilo 3 жыл бұрын
MUY AGRADECIDO
@Crosslink3D
@Crosslink3D 3 жыл бұрын
Thanks!
@billmartin6687
@billmartin6687 3 жыл бұрын
Thank you so much for making these videos, In Cura it shows the centre where the printer should be but in Pronerface its to the home position.How do I get them both in the centre of the bed. I have watched many many videos used a complete roll and still nothing. Please Please help.... Thank you.. Stay Safe. Bill M8-( Scotland
@AAAA-tp4gw
@AAAA-tp4gw 3 жыл бұрын
5:49 i dont have lcd so how to get this reading in pronterface also dont have that thing that you put on your nozzle
@azedinerachidy537
@azedinerachidy537 Жыл бұрын
how about when you are running Klipper, is it the same procedure ?
@andytaylor8802
@andytaylor8802 4 жыл бұрын
have you got a link to the phone support you use please??
@garthmccarthy4911
@garthmccarthy4911 4 жыл бұрын
how do I set my origin point to the center of the bed in firmware?
@nerd-e-ness994
@nerd-e-ness994 3 жыл бұрын
Will this work with the latest 2.0.x
@ivanb386
@ivanb386 3 жыл бұрын
Hi...Thanks for the video....I followed along and was able to get the center perfect.....However, as a result of adding my values (X=4 Y=-5) into the MANUAL_X_HOME_POS etc, the readout on the LCD reflects that when homed.....Is there a way to add those values in Marlin and have the home X & Y display X=0, Y=0 etc....My slicer scripts for end of the print tell the machine to go to X=0 however its now actually X=4 (I know I can change it in the scripts to go to X=4), but I dont want to have to adjust to that. Thanks for your help.
@loganqualls
@loganqualls 3 жыл бұрын
Hi, I did what you said and it worked, but... now when a print finishes or if I move the Y axis to 235, it grinds the belt. The home coordinates also show the values I entered into the firmware. I read another comment that said they had similar problems. I would greatly appreciate any help for this. I'm using Marlin 2.0.7.2.
@joelrowe9731
@joelrowe9731 4 жыл бұрын
The menus and where stuff is located is a bit different for the TH3D Unified Firmware... where do I enter my offset values in this version, which menu tab?
@ocooper3323
@ocooper3323 4 жыл бұрын
thats a tronxy 802. that is what just got. configuring everything now. z axis was bent, cant connect to pc, and its printing in the corner of the bed. WORK IN PROGRESS.
@okolepuka808
@okolepuka808 4 жыл бұрын
Thanks--So I set up everything, I have an SKR 1.4 turbo in a tarantula pro, for some reason after auto homing, z goes to upper right corner of bed to home and stays there--I would like it to home in center like everyone elses printer, I havent changed any settings/definitions in Marlin, z safe homing is enabled and x y (/2) bed size is defined--any suggestions?
@DarthCrumbie
@DarthCrumbie Жыл бұрын
I know this is an older video... But would this fix the problem I have (installed a Sprite Pro head on my original Ender 3) and the nozzle homes about 13mm off the front of the bed. I've set the home offsets in through the printer menu but it still homes off the bed. When I try to do bed mesh leveling the first five point measure off the bed.
@khanv1ct244
@khanv1ct244 3 жыл бұрын
Can you explain why you reflashed Marlin just to reset the Home Offsets? Can't you just send M206 X0 Y0 to set them back to 0?
@gerardtonno9458
@gerardtonno9458 10 ай бұрын
Daniel/All: I'm relatively new to this, and I'm wondering if this same procedure/commands are used in Marlin 2.1.2? I just replaced my Ender 3 Pro main board and LCD with the SKR 1.4 Turbo and the TFT35 E3 V3 as per your recommendations. Having some issues trying to compile the firmware correctly as I added a smart filament sensor and the new BTT CR Touch sensor, but I think I can figure it out. Thanks for all your help!
@soumasouma8690
@soumasouma8690 2 жыл бұрын
hey can you help i dont have LCD i wanna how to see as you num 114y 146x pls help where can i see it
@minasmash
@minasmash 3 жыл бұрын
What is the second line to fill ?
@johnm.gerard1718
@johnm.gerard1718 3 жыл бұрын
I just wondered why I need to print out the cross hair pattern? I would think I could just plug in on my printer G0 X150 Y150 after zeroing out the values in the firmware; move the print head to the center and adjust the values. Only skipping the initial X/Y cross hair printing step. Is there a particular reason this will not work?
@ottoolsen9676
@ottoolsen9676 3 жыл бұрын
Hi! Is there a setting for this in Marlin 2.0 ?? mine is 6 mm of in x and 9 mm of in y. im using the latest 02000000000000008 ver :-) of Marlin
@orb-enjoyer4980
@orb-enjoyer4980 3 жыл бұрын
great video but can you show us how to do the same procedure whit a 32 bit board?
@TheDragonsrage99
@TheDragonsrage99 3 жыл бұрын
i assume the same will work for marlin2 ?
@seawatchmakers
@seawatchmakers 3 жыл бұрын
Question i'm trying to print your x calibration file but I cant slice it nor can I see it on my printer screen when I load it on the sd card.
@allanm5576
@allanm5576 3 жыл бұрын
How do you adjust home position? instead of the front left. I want it to be on the back left?
@Crosslink3D
@Crosslink3D 3 жыл бұрын
Why?
@SebastianRamirezH
@SebastianRamirezH Жыл бұрын
I was able to center the bed, but when printin in cure it is like is not taking that value because it keeps moving more than expected in the edges, so weird
@seankirby807
@seankirby807 3 жыл бұрын
Hey Daniel... i was wondering if you could help me out with an issue i ran into.. the problem is i flashed my standard Anet A8 with marlin 1.1.8 auto level (cause i added a sensor onto it) everything seems to be working except the most important option... when i select print from SD and the Gcode to print, it heats up nto its temps, reaches its temperatures on the hotend and the bed, but will not start the print, its just sits there... is there anything i need to change in the marlin config file to get it to print?
@posterpage1
@posterpage1 4 жыл бұрын
Hi. I replaced firmware and now HOME does not exist. It goes up as he can reach and moves to the right until hitting the structure, I think step motors values are wrong as long as everything. What can I do? I have an Ender 3 clon printer, Sunhokey and installed a firmware as Ender 3. Thanks.
@BetaGod
@BetaGod 2 жыл бұрын
hello, i do this but when i put manual home (x=7 and y= 0) the printer going totally out of direction.. any idea?
@Hyper-Linkman
@Hyper-Linkman 4 жыл бұрын
Just getting into Marlin 2.0 on my A8 today, thank you for the videos btw! They've been super helpful in picking up configuration knowledge. I have two questions: 1. Is it normal for the X and Y axis to say the coordinates on the LCD (example: X: -28 Y: -3)? If so, is it possible to set the origin to where those coordinates show as X: 0 Y: 0 on the display? 2. How can I setup mesh bed leveling on an A8 on Marlin 2.0? I saw one of your videos for an older version of Marlin, and I can't find a straight-foward way to do this. Thank you for your videos! Looking forward to learning more following your channel!
@Crosslink3D
@Crosslink3D 4 жыл бұрын
I am working to update my guides to Marlin 2.0, so you can expect, I will cover these topics. The display of coordinate seems similar to what I have
@Hyper-Linkman
@Hyper-Linkman 4 жыл бұрын
@@Crosslink3D Thank you, I'm really looking forward to that! I actually just figured out mesh bed leveling tonight, mostly thanks to things I've picked up from your videos. Is it possible for uploading on Arduino without verifying to cause the LCD text to glitch? Or could that be an SD card/USB error? Sorry to ask so many questions! My stock LCD is is displaying strange glitched text after homing, and other operations since a questionable writing process on Arduino earlier. I'm trying to rule out possibilities, as I'm new to Marlin.
@ericmarable1391
@ericmarable1391 4 жыл бұрын
I have been following your steps to fix the center of my gantry pro with a 310 310 410 print area and i totally ruined it flashing the firmware. What profile do i need to use for my printer? Im having a meltdown here
@johnm.gerard1718
@johnm.gerard1718 2 жыл бұрын
Great video: I have one question: I am not sure why you need to print the calibration pattern. I would think all you need to do is home, then move X, Y to center. On my printer it is 150 x150mm. Then move printhead to the actual center where I drew the X with a pencil. So it looks like I really don't need to print the test pattern. I could then print a test patter afterwards to see if it is printing in the center. All the print patter would tell me is I am printing off center. And Moving printer to X150, Y150 seems to do the same thing. Am I missing something?
@johnm.gerard1718
@johnm.gerard1718 2 жыл бұрын
Oh I just now see I ask the same question when I calibrated another printer about a year ago.
@biagiodelsorbo
@biagiodelsorbo 4 жыл бұрын
Hi, good video; but i have a problem when i change the X_MIN POS from -33 to 0. The error code is: #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe." Do you Have a suggest for resolve this problem? I have a ANET A8 whit Skynet and Auto Leveling Sensor Tronxy XY-08N Thanks
@kerrymarshall9232
@kerrymarshall9232 3 жыл бұрын
I don't seem to have these lines of code in my configuration.h file. I am running TH3D firmware on a Creality 1.1.5 board with BL touch. Any suggestions?
@dougw9224
@dougw9224 4 жыл бұрын
Thank you for your informative video. While it work and 110,110 is in the middle of the bed, my prints run off the edge. Basically with sensor-less homing, marlin doesn't know where the corner of the bed is (0,0) or at least it seems that way. Any suggestions on that? Thx
@Crosslink3D
@Crosslink3D 4 жыл бұрын
I need to have a look into this. Never used sensorless homing before but I am very interested in trying.
@jpcme2002
@jpcme2002 3 жыл бұрын
Daniel since I install Marlin 1.1 bug fix at the middle of a print the printer gives me "Thermal Runaway" error, can you help me? I´m using a Mosfet in the extruder...
Align / offset your nozzle and bed to maximise available build volume
11:15
Wait for the last one! 👀
00:28
Josh Horton
Рет қаралды 150 МЛН
МАМА И STANDOFF 2 😳 !FAKE GUN! #shorts
00:34
INNA SERG
Рет қаралды 4,8 МЛН
That's how money comes into our family
00:14
Mamasoboliha
Рет қаралды 8 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:25
CRAZY GREAPA
Рет қаралды 16 МЛН
Klipper 3d Printer Firmware - What is it? Why do I want it?
18:09
Nero3D the Canuck Creator
Рет қаралды 246 М.
Anet A8 (Plus) Marlin 2.0 Installation Upgrade
13:02
Crosslink
Рет қаралды 163 М.
Anet A8 manual mesh bed leveling with Marlin firmware 1.1.X
10:38
Marlin: Print area (3D printing)
10:23
Zemistr 3D
Рет қаралды 14 М.
3 Ways to Silence your CR-10
14:35
3D Revolution
Рет қаралды 109 М.
All Things Z - Deep Dive - Marlin Tricks - Chris's Basement
31:51
Anet A8 Marlin Firmware 1.1.9 Upgrade. Comprehensive guide.
11:37
Add Auto Bed Leveling to your 3D printer - Marlin - 2017
12:05
Chris Riley
Рет қаралды 160 М.
ШТРАФ - БЛОКИРОВКА КОЛЕСА в США🚗
0:33
MEXANIK_CHANNEL
Рет қаралды 9 МЛН
three feet under the keel   #offroad
1:00
Nivulin 4x4 video
Рет қаралды 995 М.
W truck driver #edit #trollface
0:20
TRET1
Рет қаралды 5 МЛН