No video

Behringer System 100 ~ just a plain and simple impro

  Рет қаралды 1,666

synthe sizer83

synthe sizer83

Жыл бұрын

A plain unscripted impro with a simple System 100 patch.
Uses the two VCOs from the 112, one receives keyboard cv, the other one is sequenced by the 182. Both go into the 121 filter, but the one played with the keyboard runs through the 130 amplifier first. The filter output goes through the 172 phase shifter and the second 130 amp, modulated by an LFO, before it ends up in the Strymon ElCapistan for refinement.
The 172 distorts in an unpredictable way, depending on the audio frequency, which leads to the strange sounds you're about to hear at some points.
Thanks for watching & stay tuned!

Пікірлер: 9
@adrimathlener8008
@adrimathlener8008 Жыл бұрын
Just found your channel. A real treasure trove as I'm starting with a system 100, starting with a 100 & 140 module
@andewprod
@andewprod Жыл бұрын
Great impro! I just love the sound of the sys100 it sounds like nothing else.. the perfect blend between Roland squelchyness and smoothness. Resulting in this beautiful caracter.
@IanWaugh
@IanWaugh Жыл бұрын
Really nice. I had an original Roland 100m system but not, alas, the phaser. Great example of what it can do 👍
@lundsweden
@lundsweden Жыл бұрын
Fooking awesome! I have a similar setup, but no phaser module (yet!) This is one of those synths where almost everything you do sounds good!
@ricknemrecords
@ricknemrecords Жыл бұрын
Beautiful....
@kratersignal
@kratersignal Жыл бұрын
👍👍
@t3chnod3lic
@t3chnod3lic Жыл бұрын
Great video, thanks. Always enjoy them. I have an issue though. I bought myself a second hand keystep. The black edition. When I connect it to my Behringer System 100 the notes are off. Like out of tune or half notes. I cannot seem to work out what's wrong. Every video on KZfaq with the same setup seems fine. I'm a noob so really stumped what is causing it. I suppose it's like the V/Oct is low.
@synthesizer83
@synthesizer83 Жыл бұрын
I have the same problem with mine. I don't know if there is some internal trimmer that one could adjust, but since it's not in the manual, I guess Arturia doesn't want us to open the Keystep up. So my trick is to attenuate the CV signal slightly, because it actually is too strong (rises steeper than 1V/oct). It's a bit of adjustment, but once you found the right attenuation, it works fine!
@t3chnod3lic
@t3chnod3lic Жыл бұрын
@@synthesizer83 That's great. Thanks so much for the suggestion.
5 minutes, 4 modules ~ Eurorack Starter guide
14:43
synthe sizer83
Рет қаралды 2 М.
Behringer 172 Phase Shifter ~ awesome sounds & some background theory
23:38
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 91 МЛН
Каха заблудился в горах
00:57
К-Media
Рет қаралды 10 МЛН
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 26 МЛН
The Secrets Of Pink Floyd’s Quadraphonic PA
15:16
Sound On Sound magazine
Рет қаралды 77 М.
Behringer 172 Phase Shifter unboxing installation quick demo
10:24
Disciplined Commotion
Рет қаралды 267
8 MOST COMMON BEGINNER MISTAKES TO AVOID (and yes I made them all!)
12:10
Simon d'Entremont
Рет қаралды 42 М.
#System100 3 voice sequence, #behringer #arturiakeystep, #dawless
18:54
martyn Greenwood
Рет қаралды 1,4 М.
ROCKET that LITERALLY BURNS WATER as FUEL
19:00
Integza
Рет қаралды 2 МЛН
Busting 32-bit Float Myths: A New Era of Audio Recording
18:19
Simon Peck
Рет қаралды 18 М.
Behringer System 100 ~ melody and beat
10:49
synthe sizer83
Рет қаралды 1,3 М.
Behringer 140 Dual Envelope & LFO module
19:09
synthe sizer83
Рет қаралды 11 М.
Red❤️+Green💚=
00:38
ISSEI / いっせい
Рет қаралды 91 МЛН