One of those tools you may only use twice a year, but those two times you're gonna be really glad you have it.

you land somewhere between the Oxy clean and the slap chop dudes it terms of crazy, you know that right?

I bought one and I love it. I went to home depot and thought it was in stock but they didn't have it out yet on the shelf but when I saw it I bought it immediately and glad I did.

Thanks for the suggestion! I love my Dewalt 90 Degree standard attachment... it's saved my butt on many occasions... but this upgrade would make short work of many awkward situations without having to buy several other attachments that aren't as reliable!

I picked this up this weekend. It was exactly what I needed. We replaced the cabinet doors and draw fronts in our kitchen. When replacing the drawer blank i front of the sink I had to get to screws between the blank and the sink. Glad I saw this review because the other right and gel attachment wouldn’t have worked. Thanks Vince!

This guy sounds like he's shouting at me and telling me off. I've done nothing wrong!

I have to admit. When i first saw this lastnight after work. I thought waaaaay over hyped. Im now in my garage working on a project and i Absolutely need this right now!!! 🤦🏿‍♂️u dont know until u know!

Saw your video on the shear and bought it. Haven't tried it out yet. I have the dewalt set from 10 years ago. Still going strong.

I used a similar device to assemble IKEA kitchen cabinets two years ago. The final screw locations needed a flexible shaft driver holder. I would have mangled the job without it. Worth the money as I used it again last week on a cabinet sink cover plate.

I have the Dewalt previously released yellow colored version. No flex, no handle, no extension, with the magnet. I have 2 of them. I use special tools all the time. These new features will save you time. I will upgrade. Make sure you set aside a box, or a spot in your truck to store them. This is not a new idea, but Dewalt makes tough tools. It’s nice to see that these engineers were mechanics, first, and Dewalt backs them. If I don’t break them, I loose them. Thank you VCG Construction. Keep up the great work and for being so passionate about the topic. I like when you walk through the stores as well. Great play by play.

I love having a flexible shaft!

Love it when Vince is pumping out the Dewalt love. I have the standard right angle accessory so that's good enough for me.... or at least that's what I'm saying until I hit a job site that gives me that extra little nudge to go out and buy one of these 4 in ones!

We needed it yesterday on my install job. Thankyou my friend and thankyou for your positivity

I’m dying 😂 This is the most “Vince being Vince” video to-date. It’s also a great review of what looks like a great tool to add to my bag.

The zombies are breaking down my door I need to screw it shut 💀 Thank you DeWalt for saving my life

When I saw this about a month ago I felt the same way! I'm glad to see others excited about it as well 😄

Okay Mr.V, you got me to click with that video title to drop the practical search I was doing to use my existing tools. Trust you gonna make this good! :)

On your recommendation I went out and got it tonight. Great little tool I had a project that I Needed it. Thanks

I went from hating this guy to loving this guy in the span of 90 seconds. Once you get over his Billy Mays shouting and realize he's quite dynamic in his delivery I actually found him quite enjoyable to watch. Oh yeah, cool accessory too. Will prob check this out. Noice.

Picked it up 2 weeks ago, it's $5 cheaper at Lowe's than at home Depot

This is my first time viewing, I'm hooked. He is Mr personality! He gets excited about tools like I get excited about good veins 🤪

The flex shaft idea has been out there for hand tools for quite a while. Just today I thought about this flexible shaft I have in a "Popular Mechanics" branded screw driver set I actually have and had for at least 20 years. Thought I had was "why not use it on power tools or make one for it?" And bam. Here it is...

As someone who abuses a 1/4” impact every day at work it will be interesting to see how long this survives. It will be very useful for putting reinforcement in crates where you can’t get the impact in. The problem will occur when trying to loosen nuts that are rusted in place.

This one is interesting I'm gonna have to check it out, that small compact one might come in handy

DeWalt used to be the go-to cordless tools for contractors and professionals. I started changing to Milwaukee a few years ago and won't look back now.

Another cool tool...I don't need it but...now that I know it exists, I'll probably need it a dozen times a week from now on. Thanks, Vince--time to sell some plasma!

Loving the performance out of tools I haven't seen before for attachment for a drill

love this guy, looks like Joey from Friends. I love the attachment, can’t wait to find it as I can’t seem to spell it correctly to type it into google.

As a European i find Vince is the most stereotype American there is. I love it! I’m ordering that thing right away.

I've had something very similar to this from dewalt for a long time, its the dewalt dwarafs right angle flex shaft. It's come in handy countless times since I got it. Also to address any durability concerns one might have, I've stripped nuts and bolts with this and used it to drive decent sized bolts into 2x4 when hanging TV's, it can take a good amount of torque.

Vince has this amazing ability to convince to buy a tool I didn't know I wanted but at the same time conVINCE me it's a bad idea.

Weird... I was at depot looking for the shear attachment about the time you dropped this video. It’ll be here tomorrow about the time I’ll be done cutting the last stud lol

Vince, you are quite the salesman, and I hope you get some commissions from your efforts. Just ordered two sets of these from Lowe's... they're on sale there right now! Keep up the great work brother!

Vince awesome demonstration, save the drama for the llama, lol, buying the flex tool today, you are very informative on you videos, be safe, thank you.

I got one a few weeks ago and it helped me get some screws out up under a lazy Susan to replace the countertops it worked sweet whole reason I bought it

After watching this video I had to go to my local homedepot and buy it! This is one accessory I will keep in my daily tool bag....

I'm in the hvac trade and this is gonna come in so handy for all types of things. I use a milwaukee 90⁰ now and I'm gonna be changing out for this one

I've used that same drill for 2 years to me Milwaukee has a pro rating and DeWalt is excellent it says cool when heavily used and it performs well through the task

Framing my basement I used this thing ALL the time for routing electrical and plumbing. Did an entire kitchen of cabinets with it too.

Nice! I just saw that they're on sale. The Lowe's by me still have them posted at $40.

Vince your a goofball bud you make me laugh almost every time im starting my own home improvement company and you videos are very helpful in finding all the latest gadgets thanks for doing this

Love ur videos evertime you post them thanks for showing ur thoughts.

Your excitement and enthusiasm is infectious Vince. I love it! Had to subscribe. I also love this tool accessory. Looks worth getting for sure. At the 11 sec mark it looks like you were cutting metal with your impact. Did you make a video about that accessory as well by any chance?

I was on the fence until I saw it had 10X longer life...wow that's amazing, COUNT ME IN!!!

That was pretty funny when the screw fell off on him but definitely a sick option for your Dewalt impact drivers

Might pick up one of these for my "team red" drill

THIS GUY IS PASSIONATE ABOUT SHAFTS!!!

I have that standard right angle adapter and it is worth its weight in gold. I think this kit with the multiple options is going to be worth its weight in Platinum!

“Some might say, “VINCE!!! You’re over dramatic” point finger at camera. “NOT SO!” Lol your funny

Bro! I went to replace my 6 year old 20 max impact drill this morning. I watched some of your videos and decided to upgraded to the xr impact. On my way out I seen this bad boy and scooped it up. Got home to watch a video on it and boom here's loud ass Vince to show me what's good. Lol. Just found you today and I'm joining the Vince crew on the tube. Keep it up bro.

7:23 hahahahaha Buen video Vince y buena recomendación de usar las herramientas con las especificaciones del fabricante, saludos desde Arica (Chile)

This man talks everything that he likes up so much even if it’s not the best

this could have given me back? 3 years to my life over the many time this would have been useful

Dang. I learned something. I bought a Ryobi flexible extension, and tried it with a (DeWalt) drill. As you demonstrated, it tried to coil up like a snake. I had labeled the extension as useless. Now I see that it may be useful after all, if I just use it on the impact driver instead. Thank you.

Picking mine up in the morning.....

Sold out on amazon, but lowes had one. Life changer tomorrow. :) Thanks Vince.

Great tool video we all ways need new gadgets to make our jobs easier, I’ve dropped many screws trying to get into a tight place, almost saying wrong words

Ryobi use to make a flexiable shaft 10 years ago. I got one free with a bit set. It's awesome but, didnt have all the option like this Dewalt.

A Dewalt cordless ratchet will change my life forever

We use tools like that in the aviation industry because of many tight spots to drill rivets and holes. Also offset adapters and even one that offsets the bit at 180 degrees so you can drill around a corner. But, they’ve been around in one form or another for many years.

The early 90's called, they want you back. 'Man' I miss those days. 😅

I can't believe that the Dewalt brand is going to survive promotions like this one. It back on the coffee!

My wife tells me the plumber Dewalt tool has more length. She is very happy with the job he did.

Got it a week ago....love it!

Could you use in impact driver specif wholesaw with one of these? For say drilling 20/25mm holes in metal trunking?

I though I was the only one who gets as excited as this guy for tool stuff lol

I’ve tried multiple right angle impact attachments but the best one for what I use is the Milwaukee 1/4 in. Metal Right Angle Drill Attachment because so far It can handle paddle but up to 1-1/2 and through double studs for tight spaces. Do think themes dewalt can handle (with the flex attachment)?? The old dewalts would break where the connects to the bits

Early 80's Car salesmen yelling, C'mon down do we have a deal for you, we have the lowest prices in town, blah blah, blah, LMAO. But you are addictively funny to watch, :)

Love this guy’s energy!

A link to the product would be nice.

Well done Vincent 👏, I am really very happy I landed here in this video as you said 😂, you know I was rolling over the Internet for a tool that can be used with my impact wrench to drive fasteners in a very tight places to get the advantages of the impact for the tight places fastners, whether straight or right angle 😉, really a very cool tool, can we use it with tight nuts as well?! or fasteners only?! You know when you have an impact wrench you are wide ranged, also is it robast?! as it is slightly small in size, keep up the good work 💪, don't be late by your awesome videos 👍, greatings from Egypt 🇪🇬

I did a video on my 4 in 1 right angle couple weeks back just haven't released the video yet its scheduled for next month good work vince @Vcgconstruction

Nice. Are you aware of an equivalent to the eccentric (offset) chuck that comes with the Bosch, Festool, and Milwaukee installation drivers? Something with a 1/4" hex shank to fit all impact drivers?

I seen this and I had to watch it, also I went out and bought one myself today. Thanks Vince, it already helped me.

For making holes for electrical cables in crazy awkward positions, what about that tool on an impact driver (not drill) with a hex-shaft drill bit?

Hi vince i think it will be cool to have this kit in a litlle bag for not loose the peace btw it look dope accesories !!

I don’t have the flexible one just the standard angle attachment, but as an hvac tech it’s awesome for furnaces

I have never been as excited as this in my entire life.....

Definitely needed that installing my outdoor porch light the f ing screw was about 1 1/2 from the sidings molding perfect tool

I may need to get the flex shaft!!

Can the sleeve on the end of the flex extension not come off? I would definitely get this if it did. I feel like that sleeve attachment would get in my way when I’m trying to use the hex collet. Iv been using the ryobi flex extension very low profile but it can not hold up to the amount of twisting you just put that dewalt through, and that’s why I go through about 2 or 3 a year.

Love the way he says "shhhhayft" 😂

How strong are these if I'm using it it's probably to run wires and I need like a 1in hole and I'll probably be using a self feed paddle bit

I'm in Pa and Lowes has it on sale for 29.98

Electricians as well as people who work in the cable and phone industry could use this a lot, that's why I'm getting one. We have to try and get to the wall jacks from behind heavy furniture, and the customer never wants to move that furniture

Im an inground pool builder. Light niches have changed where drilling from behind it, inside ten inch wall forms cut down the middle with rebar cages is the easier way to embed it into the forms to pour the concrete walls. Unless you're a magician with guessing where to drive aluminum nails. I can't tell you how many screws and entire impacts I've dropped inside the wall attempting them and spend the next ten minutes trying to get it out. This attachment just made that a worry of the past

I just bought this tool. I was going to pass on it and get the slimmer craftsman version without the grip at the end but you sold me on this one haha

Perfect tool for working in the crawl space.

vince, you, by far sir, is indeed a dramatic guy

Thank you vince. I ran out and bought this after seeing your review. I am not a fan of big bird but i do admit they make some b@d@$$ attachments and capabilities. This thing is solid and just feels right. This $40 investment goes places a $200 right angle drill cant go. The flexibility of this kit is awesome.

I bought it for like 25 bucks at lowes. Very useful

Vince go to petticoat lane in London UK....there are loads of guys like you there...with your skills..

Here's the reality... Just don't use the accessory with your hammer drill as you just saw. It's not recommended. Nice video Vince! Keep up the good work and continue to enlighten us all thank you very much. 😎👍

Me watching the video now:. "Cool attachment" Me on a project when I realize I needed such an attachment: "🤬"

How do you get those # 2 bits out of the right angle attachment when it where’s out

As a DYI dentist, this is my “go to” tool!

So where would I find them? Because they aren't in the Home Depot stores I go in. Even though I saw a Milwaukee angle attachment. I thought DeWalt would make them in a year or 2 but it looks like they have them, I just didn't know where.

This reminds me of a scene in the movie "Porkies" when the lady asks the guy if he's been screwing around corners.

Love your presentation. Your voice (great) reminds me of the guy on late night cable selling knives and swords.

Just found your channel we’re have you been all my life