Thanks for taking those apart - saved me the effort. I have both, since I wanted a backup in case one of them failed. I've gone through a couple of cheap versions, so when I saw these I grabbed them.

Used Milwaukee today drill through subflooring and a stud, worked amazing.

Thank you, I was looking at both of these

I was hoping that you would do a test to failure for these two. I like seeing how much tools will take before they fly apart.

Thanks for your vid! I received all info what I need and in my trade as appliance tech I ll chose Dewalt cause it's more compact and we don't need any force I have to work in tight spaces with falling small screws .

Nicely done buddy! Looks like dewalt is more for driving screws and the Milwaukee more for mechanics but both look awesome! 👍

Awesome thank you for sharing how to get out the small bits once they get inserted inside of the DeWalt 90°. I would have never known that I was sitting here wrecking my brain trying to figure out how to get the sucker out

Great review. Thanks!

I appreciate that you included the dimensions.

Great video! Thanks a lot! I can make up my mind now.

Hello from Mexico, Great great great video, God Bless you

Great Review. Thanks

They both look nice. Great comparison video. I like the Dewalt but the Milwaukee looks like a quality accessory also. Tough choice for anyone. 👍

Cool little right angle bit chucks. I've seen the DeWalt one but not the Milwaukee. I agree, as I wonder how they will hold up after much usage. I have an old DeWalt corded right angle drill but it's really bulky and needs a large area to work in. To be honest, I've only used it a couple of times, lol. Thanks for sharing. Cheers Dan!

AHHHHHHHHH!!!!!! Sorry, just yelling at you down below. 🤣🤣 Thanks for the dissection Dan, pretty cool stuff! 🍺👍

I'm kinda surprised, I would have guessed the Milescraft Drive90PLUS would have been closer to the Milwaukee but it's definitely closer to the Dewalt. Both have both their helical gears help in by retaining rings too. All three with 1/4" shafts. The Milescraft seems to be the most solid but I think the Milwaukee follows behind it. Dewalt's definitely shines with screws compared to the others.

I have a Rigid 12v palm inpact driver and so far it has done everything I might need to do with these

I bought an original Scosche Skew-driver when they came out (early 80's). As far as I know, they are the ones who invented these drivers. The first ones were hand tools and had fixed handles. We bought some for our shop and sawed the handles off since the shaft piece was 1/4" hex and chucked them into our drills. Later, Scosche released a "deluxe" version where the handle could be removed. I like to think I may have inspired that invention :) Well, my Skew-driver jammed a couple of weeks ago during a job. I guess I can't fault it since it lasted 38 years of nearly daily use. We had an angle tool in our shop in LA I wish I hadn't let go when we sold the store. We got it from an aircraft tools place and it was a right-angle attachment with two adjustable pivot joints, which means you could literally turn it 180-degrees. I guess this made it easier to drill your face, but it was cool.

Excelente 👍

Good review 👍

first time i see the milwaukee Adapter

Sweet video 👌

i have the milwaukee one 👍

milwaukee power tools owner with dewalt bits owner.. dont care what brand as long they are on sale and they function better than harbor freight

Whenever I attempt to put DeWalt accessories on my Milwaukee Tools the breakers blow, grid crashes, cell service drops out, and black helicopters start circling overhead -- so it is probably not a good idea. One time, I was desperate and installed a DeWalt 6.5" blade on M18 framing saw. The neighbor's dog ran away, dishwasher backed up ...

Just got the dewalt at home depot. However it looks like a new model with a yellow body instead of black. Was $5 cheaper than the milwaukee as well.

I bought a Dewalt last summer that looks like the Milwaukee - must have been the older model. I wonder if some lithium grease would be a good idea.

Shine on

Buying the metal head Dewalt.

Looks like the Dewalt is better made and can get into tighter spaces

I could not justify purchasing either one right now I do got a flexible shaft which one of the two do you recommended in your opinion

What is the custom adapter that fits the Milwaukee well?

2:27 May I ask where did you buy that custom adaptor to Milwaukee's?

I have both and the Dewalt spins better with less wobble, it's also heavier than the Milwaukee which makes it harder to use in tight spots but not by much.

Curious how these are holding up?

I just got the dewalt from Amazon, trying to screw in some screws and the body of this tool was rotating as well making it hard to screw it in. I had to hold the body with my other hand to get it to screw it in. Am I doing something wrong ?

The miluakee one is so heavy duty

Have you tested the Milescraft Drive90PLUS, and if so, how do you compare it to these?

I'd rather see a right angle-through the chuck adapter. That way you can put extraction bits in it.

Both of those right angle adapters are intended to be used with a bit driver so you’re not supposed to put the bit straight in without the driver..... That’s my understanding because it’s the same with the bare tool often the bit doesn’t fit without the driver which also acts as an extension

So I want the Milwaukee cause my 1/4 impact drill is Milwaukee, but the dewalt looks stronger and more compact for less money lol

NOOICE!

I use the old metal Milwaukee 90 I bought 5-10 years ago for 20$ and I have beat it to death drilling up to 1.5” screw tipped spade bits. It’s a bit loose and slightly floppy but it literally will not die. I’ve drilled it till I can barely hold onto it it’s so hot and it is well built. I’d rebuy the Milwaukee but it’s not a full metal case anymore. So I’m torn. I do like the super strong screw magnets on the desalt tho.

Can I use one of these with my impact wrench 1/2 milwaukee?

You didn't take off the retaining ring to actually show the 90deg gearing of the dewalt...?

First ask yourself how often are you really going to use it, in my case I will use this probably once a year is not even that... so I bought Milwaukee because I'm a fan and I have a lot of tools by this company, I also have a lot of Dewalt bits and adapter. But I like Milwaukee so for that reason even with the fact I feel like Dewalt is better, stronger, I just decided to stick with Milwaukee to match my drill. They are very similar and it's for you to decide what brand you personally like if you have a lot of DeWalt tool just get the DeWalt if you have a lot of Milwaukee Tools (like in my case) get a Milwaukee just to match.

Are the shafts metal? I couldn't tell

Autoban, maybe I did not hear it but I wish you would have given your opinion which one you like the best.

What's the name of the background music?

Hi can we use a drill bit by that gizmo ?

I wish they had an external lube point

Where is you get the “Vera 870-1” adapter?

Looking for the genius who comes up with a right angle locking mechanism for either model.....one handed operation ! Biggest drawback is one hand on the drill trigger and one hand to hold the adapter head.

DeWalt all the way!

can you believe that milwaukee guy EJM Demon bought the dewalt one to use with his milwaukee drill ?? 🤔 😂

I gotta say I think the DeWalt wins I think they make another version of the DeWalt also you better get that one next lol

I remember using the original Milwaukee that was all metal and slight angle. WAY WAY less bulky. Used it in a boat manufacturing plant for carpentry installation. Best tool ever. The new Milwaukee sucks...

No chuck for drill bits...only half a drill :(

DeWalt......

My broke in the first minute...it was milwaukee

It looks like a toy..