Best Pressure Washer for Car Detailing?

Best Pressure Washer for Car Detailing? | AR630-TSS REVIEW

Рет қаралды 91,509

IMJOSHV - Car Detailing and Reconditioning Tips

Күн бұрын

I needed a pressure washer upgrade for one of my mobile detailing vans. I decided to test out the AR Blue AR630TSS, this is the cold water model with the total stop system. I had heard good things about this unit but I wanted to walk through it with you so you could see my first impressions. This may be one of the best electric pressure washer options for car detailng. Plenty pf PSI and tons of GPM! AR Blue did a fantastic job with this unit. It is compact, heavy duty, and performs amazingly well... Enjoy!!!
See the items I use and join the mailing list at: www.DTLRsupply.com
AR BLUE AR630TSS - amzn.to/38cJytl
BEST UPGRADES FOR YOUR PRESSURE WASHER!
#1 Quick Connects
amzn.to/3wowU0Y
#2 Upgraded Hose
UberFlex - amzn.to/3wmuAr5
FlexZilla - amzn.to/3vjS6os
Adapter for m22x15 pressure washers - amzn.to/3wsQlG1
#3 Upgraded Wand
Wand with Swivel - amzn.to/2T89QVV
Cheaper Option Wand - amzn.to/3wo10l2
Swivel for Wand - amzn.to/3h7YKd4
#4 Foam Cannon
MJJC Foam Cannon Pro -
on my site (in stock and ready to ship) -
MJJC Foam Cannon Pro v2 - dtlrsupply.com/products/mjjc-...
(unbranded) - dtlrsupply.com/
on Amazon - amzn.to/2T8MDms
Cheaper Foam Cannon - amzn.to/2RtBvQK
✅ 1.1mm orifice for Foam Cannon - amzn.to/3i2IMAKMy Favorite Soap - amzn.to/3wqcUL8
VIDEO ON HOW TO CHANGE THE ORIFICE - • How to get MORE FOAM f...
#5 Surface Cleaner and Chemicals
Surface Cleaner - amzn.to/2RA0emj
Super Clean - amzn.to/3wlA9WJ
P & S Brake Buster - amzn.to/2RCvFwn
Ryobi 3000psi Electri Pressure Washer Video - • Ryobi 3000psi Electric...
How to Adjust PSI on Pressure Washer Video - • HOW TO Adjust the PSI ...
TIME CODES:
0:00 - Best Pressure Washer for Car Detailing?
0:35 - AR630TSS Unboxing
0:40 - Features
5:12 - Set Up
8:50 - Testing
11:50 - Better Hose
16:13 - Foam Cannon Test
18:37 - Final Thoughts
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
#PressureWasher #CarDetailing #AR630
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).

Пікірлер: 200

@dustin3700 Жыл бұрын

I've had mine for a year and a half and have no complaints, don't forget to change your fluid and if you are using hard water and it sits use a flat blade screwdriver to turn the motor over to knock off buildup before starting to prolong the life of the pump.

@no_lft_shft 2 жыл бұрын

Josh putting in WORK! Thank god because KZfaq is dry without ya bud

@domingogarcia3594 Жыл бұрын

Owned one of those for hot water, its a beast, loved it, 7 years and still great, bad thing is the weight, I turn it into a hydro jetter, and perform so nice. I will buy one or two more this week for my other trucks.

@MrJpen82 2 жыл бұрын

Ordered my foam cannon from Josh Friday morning . . . it was in the mail the same day & I received it Wednesday. I'm here in Ohio. Thanks Josh for the fast service!👍

@ryancpeters 2 жыл бұрын

Ive got the same exact HF cart in blue along with the AR 630 - love that machine! Size 4.5 or 5.0 tips for max flow

@rodcox1005 2 жыл бұрын

I just installed my AR630TSS yesterday and I absolutely love it. It does not make 1900 PSI and never will. The max pressure any washer will make can be seen on the pressure guage when the unit stops, you will notice your guage said 1400 psi, mine did as well. The bigger question is how much pressure is lost from that point when you are running it. My Green Works Pro 2700 would build to 2700 psi but would drop to 875 psi using a 4.0 nozzle. The AR630 only builds to 14000 psi but only drops to 1150 psi using a 4.0 nozzle and flows twice the water while doing it. Here are my numbers testing different tips. 3.0- 1275 psi, 3.5-1225 psi, 4.0- 1150 psi. You will notice there is only a 50-75 psi change for every 1/2 nozzle size. Since most of us are using these things to wash cars what's important is finding a pressure washer that can run 1000 - 1200 psi while flowing as much water as possible and this unit delivers better than any other 110v electric I've seen. Just make sure you have a 20 amp outlet to run it!

@gunsmokezz 2 жыл бұрын

Perfect 👍 seems the 4.0 is the perfect size for this machine. Maybe even 4.5 to get more gpm

@rodcox1005 2 жыл бұрын

@@gunsmokezz I have the MTM Blue rubber nozzle in a 4.5 with a 40 deg fan and it runs 975 PSI and flows water like crazy. 4.0 to 4.5 is the sweet spot just decide if you want more PSI or more pressure. Both work well and most would be happy with either one.

@johnboy5632 2 жыл бұрын

thanks for the comment, I had a question. How big of a generator do you think someone needs to power this beast? I"m asking because I do mobile detailing. Any response would be greatly appreciated.

@rodcox1005 2 жыл бұрын

@@johnboy5632 The simple answer is you need a generator that has a 20 amp 110v plug. This thing pulls around 19 amps if I remember correctly, I don't think anything with just a 15 amp plug will handle it.

@johnboy5632 2 жыл бұрын

@@rodcox1005 thanks for the reply man. OK. I have a Firman generator it has 20 amps and 120V. 2000 starting watts 1600 running watts. I think I should be ok.

@gregorybarrera8719 2 жыл бұрын

Thank you for all your videos and recommendations. I've built my detail setup off all your products you test and recommend. Also waiting on my maxshine polisher that I ordered with your code.

@trapcracker 2 жыл бұрын

Just got one recently and it’s amazing. Best bang for your buck for sure.

@salaquino 2 жыл бұрын

I saw another review of yours and I commented you made me not buy it :). Thanks. I see this great review and you made me pull the trigger. I ordered this morning. was wondering if I should wait for the Active 2.0 coming in July for about half the price but I am sure I can't go wrong with the AR630-TSS. Your test on the VE52 was interesting and the 2.0 states to be even better, but probably not the longevity and as robustness of the AR. BTW according to AR site normal working pressure is 1400PSI so readings you were getting are good. I love watching your reviews since you do different non biased tests and answer many questions I usually have. Good work. I would press the like button more than once if I could.

@big-redsdetailingcliffords2379 2 жыл бұрын

Appreciate the video brother been debating on pulling the trigger on one of these excited to see what you think.

@derlar777 2 жыл бұрын

Just got the AR675 unit that runs on 15 amps and is very quiet unit after my VE52 unit failed with in 6 months, so I decided to move up a level. I found the pressure levels and GPM are advertised at 2000 psi and 1.7 GPM but wasn't getting those numbers like you. So I see on their website the specs are showing MAX pressure and MAX GPM numbers and below those specs they show the rated pressures and that is where it is at. This can be manipulated by the nozzle size as you show, I really like this unit so far and the noise level is quite low one of my favorite features.

@davestewart9146 2 жыл бұрын

Looks like a great pressure washer, thanks Josh 👍😁

@JimboHD2005 Жыл бұрын

Thanks so much for your videos! Super helpful!!!

@elomeli211 Жыл бұрын

Love mine, really do. But in my detailing trailer I run a igen4500 inverter generator. The plug that comes with the pressure washer would constantly pop it's breaker when the inverter would ramp up. Work around was to do away with the factory plug and wire in a normal waterproof plug. Second issue was finding the right diaphragm pump to feed the pressure washer from the water tank. Running a 3gpm pump just wouldn't feed the pressure washer enough and it definitely didn't sound happy. The fix was to run a 5gpm 60 psi pump to feed it. Next issue was it over amping the transfer pump because even though it was being fed, it still wanted to pull the water. Factory fuse for the diaphragm pump is 15amps, it's currently wired to a 30amp breaker with heavier gauge wire. Again, I love the pressure washer for its reliability, but if I had to replace it.....id go with the non TSS model. There's a delay that I don't care for. BUT, it's currently in year 2 and washing away. Just some food for thought for the mobile detailers out there👍

@gilasmobiledetailing 2 жыл бұрын

hope you can review the big boi washer too. I use it in my detailing business, and I can say it can beat most of the expensive pressure washers. with a 2600 and 1.8gpm. it is all we need to wash a car. More power to you

@Laidoffsick 2 жыл бұрын

I've had my 630 for a year now. No complaints at all. buy once cry once!

@dtna 2 жыл бұрын

Just looked at your website. Very nice and professional.

@jasonfranks3240 2 жыл бұрын

Nice Unit...Excellent review...Appreciate the video's

@kirbyschneider4187 2 жыл бұрын

For that price, you would expect a better gun and hose. Great video. Thanks Josh!

@AB-80X Жыл бұрын

Honestly, I'm surprised that it even comes with either.Most will use their own setup.

@legacydentco 2 жыл бұрын

Dang brother! You could post a video about why I need to wear pantyhose during detailing, and I would be on Amazon putting them in my basket.😂 I got to say though, thank you for the contact! Thanks for the hard work my friend! I have taken a lot of your suggestions to heart and it has really helped me in the craft. I’ve been purchasing items using your links, and purchased from your store. And, sidenote, for the past few months I’ve been commenting on how Milwaukee needed to get their game together and put out a random orbital polisher. After you reviewed all of those other cordless ones. Just so stoked that I finally got mine today, and it’s a beast!

@peterjohnson8631 2 жыл бұрын

Says a lot about you. Wow

@footbig18 6 ай бұрын

Hey Josh great video as usual. My question is have you tested the equivalent kranzle and if you have which one would you go with.

@NLDesigns 2 жыл бұрын

I love my Ryobi 1900 but I'll be keeping this in mind

@dustin3700 Жыл бұрын

I watched 3 flow and pressure reviews before buying mine and some were over on both and some were almost dead on and yours is under the only differences I see is hose and guns. It's definitely all you need for detailing unless you wash mud trucks.

@imaginewagons2082 2 жыл бұрын

Love the work have a review suggestion and it is the Karcher k2 power control

@alexbonilla4262 2 жыл бұрын

I’ve had mine for two years now I got the hot because they were sold out of the regular I love it I got it set up with a Cox real 100 feet of hose the only bad thing I see on it is such a long hose there’s a small delay and it turns on and off

@johnboy5632 2 жыл бұрын

Awesome review man! I'm on the fence on getting this AR PW, Looks Really Nice though. I do mobile detailing, I'm just wondering how big of a generator do I need to run this PW Effeciently? Any Feedback would be Greatly Appreciated.

@Auto-Bots.Custom.Detailing 8 ай бұрын

I was wondering the same thing, im I’m the market for a generator and a professional pressure washer.. I just want to buy the correct equipment

@playingwithevil118 2 жыл бұрын

Not sure if it matters, but have you ever tested the PSI at the gun outlet, in between the actual gun and nozzle? I understand your testing method is the same all the time but I'm curious if there is any change testing it from the front of the gun.

@V_RB 2 жыл бұрын

Love your videos. From your experience, what is the best start/stop pressure washer that won’t break the bank?

@gunsmokezz 2 жыл бұрын

Active v52

@user-Mike80 2 жыл бұрын

Is there any chance you can do a review on the generac speed wash 3200 pressure washer. I’ve heard good things about it and was probably going to buy one. They don’t have many videos out on them and you do a pretty good job at reviewing them.

@inkgenie9760 2 жыл бұрын

Great review

@newshadespressurewashingse1579 2 жыл бұрын

How has this been holding up. I do hood cleaning and I'm looking to use this in areas I can't bring my truck mounted pressure washer.

@kcimages5157 Жыл бұрын

I've got the brushless Greenworks , wondering if I'd see enough difference to spend the $ on the ar blue 630 ? Thnx

@alexandrelefebvre3847 2 жыл бұрын

Big thanks from Québec Canada 🇨🇦

@hookandlateral1 2 жыл бұрын

What soap did you put in the foam cannon?

@autosheen 9 ай бұрын

I have mines connected to my predator 4550 on the 30 amp receptacle.. I keep getting overloading issues on mines any ideas as to what could it be?

@MrJuandiego1988 Жыл бұрын

Does this needs a transfer pump or does it have its own suction?

@merbesfield Жыл бұрын

Hey Josh nice video. Curious why there is so much water dripping out of you nozzle?

@coryward2882 2 жыл бұрын

Will it work with a gravity fed tank??

@btown949 Жыл бұрын

Does anyone know where to get the adaptor he uses at about 6.55 to go onto the water hose inlet?

@SeanPD1193 2 жыл бұрын

This has probably been asked and answered but I can't find the answer. How much foam canon solution is needed to wash a standard size car? Do I need to mix up a entire LItre every time or is it possible to mix up a lesser amount? can the solution that is mixed be saved in the canon and used on the next wash or does the foam canon need to be cleaned each time?

@kingdavid2018 Жыл бұрын

Does the 1/4inch uberflex limit the GPM? Shouldnt you run it with a 3/8 kobrajet?

@Reedith Жыл бұрын

Will this thing wash a deck or concrete driveway or is it just for cars ?

@winstonite Жыл бұрын

Would you recommend this unit over the Adams Pro?

@trd3786 Жыл бұрын

How strong a generator do you need to run the AR Blue 630 TSS?

@MrRockstarbartender 2 жыл бұрын

Do you have a new link to the cheaper foam cannon from Amazon ? I’m barely starting to get into this. I think you said it was like $15 or $20 bucks before…

@JJV-wr5wx 2 жыл бұрын

That hat is sick bro! 😎

@pacogarciaish 3 ай бұрын

The AR blue 630 already comes with oil or do you have to put it in and how much oil does it need and what type of oil is it?

@AndySantiago-yd5lh Жыл бұрын

Just got mine 😎

@CHIBA280CRV 2 ай бұрын

Cool looking unit and im trying to decide this unit or the Kranzel 1322ts . Which one you feel is the best ? Also do you have the kranzel unit . Thanks please let me know 👍🏼👍🏼👍🏼👍🏼👍🏼

@CJ_garage Жыл бұрын

Great pressure washer forsure! I wanted to ask what is the difference in the red oil cap and the black one noticed mine came with both red is a cap and black is a dipstick type thing what is the purpose for both?

@LuisC202 Жыл бұрын

the red cap is for transport only and the black one is used when the pressure washer is being used since it has holes in it.

@jsclayton 10 ай бұрын

What we’re the 2 hand sprayer chemicals you used?

@raulcolima6343 Жыл бұрын

What water filtration are you using?

@LookinnForward 2 жыл бұрын

What type generator will you use to run the AR Blue pressure washer? Do you have to alter anything with the generator to get the Amps required by the pressure washer? And are you using the same generator spec with the Adams pressure washer as well?

@la_araby_5370 Жыл бұрын

In order to use the AR Blue 630 TSS, you would need a generator that provides a 20 amp outlet. As the AR Blue requires that. I personally use the Predator 4550 generator.

@thetacticalape8852 2 жыл бұрын

I just bought the AR675 TSS. I would have gone with the 630, but that 20amp requirement killed it for me. I rely on client's electricity... Anyhow, I am enjoying it very much so far. Hope it does well!

@sipzter 2 жыл бұрын

Is it still going well? Looking into buying one.

@thetacticalape8852 2 жыл бұрын

@@sipzter Absolutely loving it so far!

@johnboy5632 2 жыл бұрын

I had a question. How big of a generator do you think someone needs to power this beast? I"m asking because I do mobile detailing. Any response would be greatly appreciated.

@kunya23 Жыл бұрын

I have a Honda eu3000 but every once in a while when I start it out cold it would say “overload “ and I would have to go back and restart it again to work fine.

@treverbickmore476 Жыл бұрын

@@kunya23 I have the same generator and was going to be purchasing this pressure washer tomorrow. Will I have any issues?

@orangeduc3129 8 ай бұрын

What is the life span of this pressure washer can it be used for business washing please thanks greetings from Ghana

@ricardogibbings2996 2 жыл бұрын

Good night looking from Trinidad I check amazon but its not available, I wanted the price

@Auto-Bots.Custom.Detailing 11 ай бұрын

Would you choose this unit over the Adams professional pressure washer? There seems to be some draw backs to this unit including the 20 amp. The Adams unit is larger but seems like it’s built well.

@imjoshv 11 ай бұрын

Yea honestly I would probably go with the ar. They have been around forever and have service centers near me if I ever needed any parts replaced. The 20 amp can be a little annoying though

@eduardoaltamirano9983 Жыл бұрын

Hi, 5 AR630 are enough for a car wash of 100 cars daily?

@trojannatiom 2 жыл бұрын

If I have to flip the foam cannot (Amazon’s foam cannon) upside down every time in order to get foam to come out, should I just buy a different one? I have the Costco 2000psi green works pressure washer

@Ryan_H22 2 жыл бұрын

Do you have to use it upside down? Or like flip it over than back upright and it works?

@ricardogibbings2996 2 жыл бұрын

Do you hav kacher electric pressure washer where you live and can you do a demo with one it's what we hav

@V0LKSJAGER 3 ай бұрын

I always have this doubt Josh. Won't the electricity pass through the plunger pump and cause any shock ? My 14 year old Karcher K3.550 just broke and I want to upgrade to a plunger pump but just worried about the electric shocks if I mistakenly touch it when there is power. Would be glad if you can create awareness on this. For example Karcher HD511 cage classic doesn't come with a 3 pin plug, so technically there is no ground but is it still safe to hold the cage and move it around?

@tubbin_2830 2 жыл бұрын

I saw someone out ONR in the soap inlet in one of the pressure washers, think that’s would be a good idea a?

@lioneljean4117 Жыл бұрын

there is no need for us weekend warrior to even touch the soap injector

@SnakeDoctor5104 2 жыл бұрын

It may need a break in period. I bought mine used and it was giving roughly 1850 psi. I did an oil change on it and the psi dropped to like 1500 psi. After a few months I checked it again and I was back at 1850 psi.

@AB-80X Жыл бұрын

Yep. Many of these semi-pro and pro machines need to be broken in, especially if they have ceramic piston coatings.

@wally6193 Жыл бұрын

@@AB-80X do you know the break-in procedure for this unit?

@thebarbaboys4622 2 жыл бұрын

Hey josh my mjjc created thick foam for 10 seconds then turned into water

@orangeduc3129 Жыл бұрын

Good job

@CaptainMike100 Жыл бұрын

I think you should have set the valve on the machine fully on the opposite direction. The logic is the other way around. Trust this way you would get higher psi and higher gpm. Also what aboyt doing the test again using a 4.0 - 4.5 and 5.0 orifice as well as using a foam canon orifice in the range of 1.32-1.4 and 1.5 and see what we get in terms of foam and moist important on the amperage side. Thank You for all you videos and time.

@gunsmokezz 2 жыл бұрын

Wished you tested it out with a 4.0 orifice. Want to see the psi and gpm

@rodcox1005 2 жыл бұрын

4.0 gives you 1150 psi, I didn't measure GPM but it should be around 2.1.

@jeffreyrobert9460 Жыл бұрын

My problem with the AR is it requires a 20 amp circuit. And since I rent I’m not upgrading the circuit. Otherwise great

@mtiger5 3 ай бұрын

Kranzler 1322 v AR630 v active 2.3 money no issue which are you getting for home use car washing?

@keithking3195 2 жыл бұрын

Is this self-priming? I want to run it with gravity fed tank, but I dont want to mess with a pump system.

@imjoshv 2 жыл бұрын

That’s how I am running it!

@kunya23 Жыл бұрын

Please answer if it will work on gravity fed water from the water tank???

@imjoshv Жыл бұрын

It absolutely does! That’s how I have mine set up in my van

@Heijmen0481 2 жыл бұрын

I’ll have a pressure washer thats 1900 psi, wich nozzle do i need for more foam? 1.1 or 1.25?

@gunsmokezz 2 жыл бұрын

Depends on brand. Box ratings don’t mean anything. If it’s a sunjoe ryobi karcher junk, then use a 1.1 You only need the 1.25 if the machine is able to put out a lot of water

@Kiki099 2 жыл бұрын

I just got mine last month from the clean garage :). Coming from a Karcher 1700 cube it was pretty over kill haha but I love it I'm also using it in my mobile set up. I'm using a 4.0 orifice I haven't tested my psi/ gmp but just based on feel I can definitely tell it feel around 2 gpm. Obsessed Garage recommends a 5.0 orifice but I don't have one lol.

@teamgeorgefitness3032 2 жыл бұрын

Dude i went from the karcher 1700 to the active ve52. Makes your realize how big of a piece of sh** the karcher is 😂😂😂. Did cobra jet hose and MTM stubby gun and WOW! 🤩🤩🤩

@peterjohnson8631 2 жыл бұрын

5.0 is prob a little bigger than I would want. Prob want the next smaller size.

@ricardogibbings2996 2 жыл бұрын

Hi I was checking your videos I seen a kacher demo thanks

@no_lft_shft 2 жыл бұрын

How many pressure washers do you have lol. What do you do with them after you test them

@user-ui9on5rf2p 2 жыл бұрын

make a video on what is a good pre soap

@Auto-Bots.Custom.Detailing 7 ай бұрын

Josh, would you go with the AR, over the 2.0 when it’s double the price? I’m kind of holding out for the active 2.3

@imjoshv 7 ай бұрын

I love my ar630. It performs super well and is extremely quiet but it’s also very heavy and draws a lot of power. If your power can handle it (20amp for sure) and you use it a lot the ar is a great choice because it’s also serviceable. There are a few new pressure washer brands that are looking to launch in the us in 2024 so we will see how they stack up against the active as well

@milazemay 9 ай бұрын

Friggin Chicago weather. I feel like moving back to AZ

@mikezupancic2182 4 ай бұрын

Wondering if the company ever reached out as to the testing numbers being skewed,,or if you noticed increased performance after a break in period?

@chosenmusicartist Жыл бұрын

What about using the cr spotless with it.i just got mine but it says deionized water will make the seals not last as long? If I’m reading it right

@lioneljean4117 Жыл бұрын

Watch out for the cr spotless. I believe it is only made to filter a maximum of 2 gallons per minute. Also, was it written in your manual that deionized water would affect the seals?

@LuisC202 Жыл бұрын

I just read this in the manual as well. The DI water will ruin metals over time so it is best to run soapy water afterwards on tap water to flush out the DI water if that makes sense.

@lioneljean4117 Жыл бұрын

@@LuisC202 ok, I didn't see that part in the manual. I guess I should check again. It does make sense to run water again to clear the pistons of DI water

@mingoreyes1 2 жыл бұрын

Can this unit run on a 2500 inverter generator? Please answer

@kunya23 Жыл бұрын

No it will not. I had a 3000 W honda generator and it would constantly trip the breaker. It had a 20A outlet but still wouldn’t work.

@eric6913 2 ай бұрын

Great video! Where did you get the brass Female GHT to Female GHT from?

@MaasPatrick 8 күн бұрын

It’s a BSPP female to GHT female adapter/coupler. It’s on the Clean Garage or Obsessed Garage website.

@maoss40 2 жыл бұрын

Please review Dura-dressing for tire

@Coodeville Жыл бұрын

So far from what I've seen, this is the only serviceable unit I've seen on here. The rest are finished if they go bad after warranty.

@user-ut3lb5fd5c 4 ай бұрын

Have you been using the Uberflex hose with AR630 without issue?

@afdetailing8104 2 жыл бұрын

You are losing pressure at the nozzle, Your gun seems to be leaking at the quick connect. Probably a blown o-ring. Might be time to go for a mosmatic or mtm sgs ! Other than that, great video!

@kiknlif Жыл бұрын

I noticed that too. Bad readings with that blown o ring

@77autodetailing Жыл бұрын

Hi Guys! Why should I buy AR630 TSS instead of AR630? What's the advantage of system TSS? 🙂

@adolforeyes4102 2 жыл бұрын

Can’t wait for the active 2.0 to come out, sounds like it’s going to be at the top for “consumer grade” around $3-400 range if I remember right, not too bad for the number they say the machine is putting iut

@obliviondio 2 жыл бұрын

Active 2.0 is a throw away product as in once it goes beyond the warranty then you throw it away. If you need individual internal parts to fix it yourself then you're screwed. It's no different than the other low-end washers that are only imported as whole units where there is no option to buy individual internal pieces.

@peterjohnson8631 2 жыл бұрын

How long is the warranty for the new one? Also, what are the numbers this unit is supposedly putting out?

@obliviondio 2 жыл бұрын

@@peterjohnson8631 They are keeping quiet about it which is a red flag. It's probably similar to the ve56 as just a 2 year then throw away. These are not long-term units. Imported to sell at a low price to make high profit off sales. No different than every cheap throw Away at the box stores.

@peterjohnson8631 2 жыл бұрын

@@obliviondio there is a video (not sure exactly which one) out already where they tested this new one and it wasn’t outputting the figures they originally stated. I think they were still decent numbers but yeah. Ironic though since obsessed garbage is always bad mouthing the other companies for doing the same thing but maybe it’s different for this situation since he’s gonna profit from it?

@obliviondio 2 жыл бұрын

@@peterjohnson8631 Trusting someone that gets endorsements off something he sells is not wise. Just the same with any review on KZfaq that embeds ads in their videos even though you pay for KZfaq red to watch adfree videos. Obsessed considers the build quality of the 630 as "janky" implying not so great compared to his kranzel even though the 630 can outperform the kranzel and last as long. The 630 can also be pieced together with all available parts in the schematics just like the kranzle. Overall the 630 is just as high-end as the 110v kranzel. The Active 2.0 and all of their other products are just at a bar slightly higher than box store 110v electric quality. I say 110v because box stores like northern tool have high quality 220v in the store.

@anthonyhernandez889 Жыл бұрын

I havE A AR BLUE 630 as well but I can’t make it to work it won’t turn on I have it hook on my 3500 predator generator Someone!? Willing to help plz ?

@pasqualepisani 2 жыл бұрын

Can you show us the 1.25 orifice to see how the foam consistency looks? I only have a 15 amp breaker.

@MrAbword 2 жыл бұрын

You need a 20Amp to run this

@pasqualepisani 2 жыл бұрын

@@MrAbword thanks

@godowarus Жыл бұрын

Try to use a 1.5mm orifice. Since a 1.5mm orifice is similar to a 5.0 rinse nozzle, it’ll draw just under 15amps. Around 14.5

@defaultHandle1110 3 ай бұрын

Quickly. AR680 vs Active 2.3 ???

@davidbram 2 жыл бұрын

Obsessed Garage and Clean Garage both recommend the 5.0 nozzle with this machine.

@peterjohnson8631 2 жыл бұрын

Can go with different sizes. Just because KZfaqrs recommended one thing doesn’t really mean much

@davidbram 2 жыл бұрын

@@peterjohnson8631 ok

@peterjohnson8631 2 жыл бұрын

@@davidbram I meant didn’t mean much as in it isn’t set in stone or the only way. Lol. Read my reply and I made it seem like what they had to say was meaningless which wasn’t what I was trying to say

@davidbram 2 жыл бұрын

@@peterjohnson8631 no worries.

@finitolowpez Жыл бұрын

Great video Josh! I own this unit, and sometimes I'm having issues getting to start, I'm running a 30A-4,000 watts generator and it overloads it when the problen is present. I also tried at home on a 220v outlet and same thing, I bought it at Clean Garage website, but I can't get any support. Anyone having this issue??

@autosheen 9 ай бұрын

Hello I have the same exact issue.. running mines on a predator 4550 30 amp receptacle. keeps overloading. Have you resolved yours yet?

@finitolowpez 9 ай бұрын

@@autosheenHello, My issue was fixed by lowering the water pressure on the unit. I lowered mine about halfway and problem stopped, I hope that helps.

@autosheen 9 ай бұрын

Thank you I will try that. 🙌@@finitolowpez

@finitolowpez 9 ай бұрын

@@autosheen Good luck 👍

@bricolageultra Ай бұрын

How much is it please?

@NickVetter 2 жыл бұрын

I have had two ar blue clean 383 pressure washers and they both suck. One almost started on fire.

@jesseplummer2865 Жыл бұрын

What’s better in your opinion ar630or the kranzle 1122st?

@imjoshv Жыл бұрын

Performance wise they are very very close. Honestly I would save the money and go with the ar630, unless you want wheels and onboard hose then go with the 1122

@jesseplummer2865 Жыл бұрын

@@imjoshv I was thinking of maybe getting the 1322. Just want to be able to use it mobility and stationary for home use

@Trihope Жыл бұрын

I’m surprised this one costs so much and doesn’t seem to perform as well as the active 2.0. Surprised this was your main.

@godowarus 2 жыл бұрын

Matt from Obsessed Garage has tested this unit as well. He used a 5.0 orifice nozzle and got 975 PSI with just over 2.3 GPM. I got a chance to try one for myself and I absolutely loved it. Also, ratings on rinse nozzles and foam cannon orifice sizes are different. Foam cannon orifice sizes are actual 1.1 mm, 1.25 mm, etc. Whereas orifice sizes from the 0, 15, 25, and 40 degree are standardized at 4000 PSI and the orifice number indicates a GPM at the 4000 PSI. So a 3.5 orifice rinse nozzle is 3.5 GPM at 4000 PSI, not 3.5 mm.

@peterjohnson8631 2 жыл бұрын

5.0 might be a bit much. Would go with something with a little smaller orifice

@godowarus 2 жыл бұрын

@@peterjohnson8631 I just went by Matt's testing in that close to 1000 PSI for washing cars, the AR630 got a little over 2.4 GPM. The smallest you can go for the AR630 is a 3.0, I believe. You'd get about 1700 PSI at maybe 2 GPM but you'll be pulling 17-18 amps.

@peterjohnson8631 2 жыл бұрын

@@godowarus if those numbers are correct I would say a 4 would prob be just perfect. Good balance of psi and gpm

@godowarus 2 жыл бұрын

@@peterjohnson8631 That's exactly right. The OE gun gets 1400 PSI and Josh tested a 3.0 nozzle getting the same pressure. Matt from Obsessed Garage tested a 4.0 got 1200 PSI but no GPM test. Since a 5.0 got 2.3 GPM and a 3.0 got about 1.8, the middle assumption of a 4.0 would be just over 2.0 GPM

@peterjohnson8631 2 жыл бұрын

@@godowarus what did you mean No gpm test? Wow. Must mean the ar630 output is that much better than his beloved kranzle.