Hope you enjoyed this 3 Recommended/Optional things to do on the WLTOYS 124019 to get the very best out of your brand new buggy i would highly recommend doing these small mods. *PLEASE NOTE* On the video i adjusted the droop screws quite low which you may notice i was aware of this and this was for demonstration purposes only you will have to set your droop screws to your liking and set how low you want the vehicle to sit depending on your intentions you may also have to adjust camber to compensate for lowering the overall stance to get the best stability and handling possible for those high speed runs. Hope you enjoyed this video and it is pretty much the same procedure for the 144001 and i have left the link in the description above to the original video Cheers guys
@hectorcervantes39783 жыл бұрын
What weight should I use for the front shocks
@allanuriah34363 жыл бұрын
instablaster.
@fossfamilyrc80663 жыл бұрын
I did a brushless conversion on my 124019 and with everything surpass hobby a 7700kv and a 60 amp and maxed out at 61 moh
@Lukas_9113 ай бұрын
Very informative video!!! Thanks for posting
@andrew4403 Жыл бұрын
See now that really doesn't matter if other people reviewed them or not. We like watching you not them. So people like me haven't even watched their videos cuz I watch you so I didn't even see what was going on. So it probably would be a good idea to fill us in on that. I'm not being biased but I subscribed to your channel not theirs. Just mentioning that because there's other people out there that might be like I am pretty much only watch you and maybe a couple other people on certain things. See you explain stuff a lot better than some. Keep up the good reviews and I'll keep watching. 👍👍
@deanopud693 жыл бұрын
Loving coming across your channel mate.will be watching all your videos during lockdown 3!!! Keep up the excellent work
@beyondRC3 жыл бұрын
Cheers mate glad you like the channel! Hopefully keep you entertained through the lock down! lots of new vids on the way as well so stay tuned!! :)
@ronaldderonde2 жыл бұрын
From december 2021 WLtoys sells the: 124017 version 2,it is brushless 2845 4300K. Motor gear 19 teeth,absolutly no cogging any more. Transmitter upgrade for range. I have one and it is a bang for the buck,135€ incl 2 batterys.
@darkki942 жыл бұрын
nice , i got myself 124018 with 2 batteries for 77$ , the brushless were a bit out of pocket for me but should be a good first RC car i hope.
@Batoti_world3 жыл бұрын
Thanks for the good recommendations, I should be doing this once I received my unit.
@beyondRC3 жыл бұрын
Well worth doing 👍😃
@bigbeardrc41453 жыл бұрын
You cinematography is sterling mate well done
@beyondRC3 жыл бұрын
Thanks mate! Getting there! Cheers 🔥❤
@Dandalandan1173 жыл бұрын
Thanks for the recommendations. Will try these tips out on mine once I have free time.
@beyondRC3 жыл бұрын
Cool. No problem 😃😁
@bretzeletouffeur74013 жыл бұрын
Tough number 1 would be brushless swap + upgraded transmission, then number 2 change the tires, then number 3 change the body to Maserati GT3 and grind the road.
@bretzeletouffeur74013 жыл бұрын
Still waiting the new chassis to upgrade a 144001 :-)
@beyondRC3 жыл бұрын
Hahaha yesss!! Hopefully it will be available separately soon 😁😁
@bretzeletouffeur74013 жыл бұрын
@@beyondRC Hey mate, I bought lot of different tires to test and found very nice tires for the 144001: It smells the same than real car tires, it has a premium foam inserts compared to stock tire, the "print" on it is deep, it has a very good grip for wet and dry asphalt and NOT ballooning on my 3S brushless, and best of all .... it cost less than 1 € per tire and is same original tire diameter (rare). I bough some cheap premium rims for it that are better than stock rims. Very happy, bought 1 then ordered 15 x 4 to get lowest delivery price. But now I realize than even abusing theses tires for more than 15 runs on 3S, drifting every corner, spinning the tires on hard starts and blocking it on breaks: NOTHING on tires, it is like brand new ! So I guess I will have for years of bashing with 15 trains of 4. Here is the beast: fr.aliexpress.com/item/32831563537.html
@EyesOnRC3 жыл бұрын
really good video as always, your video game is on fleek!
@beyondRC3 жыл бұрын
Thanks mate appreciate that a lot! 😃👍👍
@DailyStreamerCutss3 жыл бұрын
Wow , i dint see the intro . Its pretty cool!
@beyondRC3 жыл бұрын
Thanks 😁😅
@sophie28ize3 жыл бұрын
Great advice!! Thank You!
@beyondRC3 жыл бұрын
Your welcome 👍
@ilovejesus9733 жыл бұрын
Thanks for all your tips.👍👍👍💯💯
@beyondRC3 жыл бұрын
No problem 👍
@tripyramidpictures9224 Жыл бұрын
Thanks
@fossfamilyrc80663 жыл бұрын
And now I put a 120 amp esc and a 3.5 turn sensored motor and I'm in the hundred mph now I'll do a video and show u guys when I get time
@djwalruss48973 жыл бұрын
Great video
@beyondRC3 жыл бұрын
Glad you enjoyed it :)
@kyhonjan Жыл бұрын
Excellent work except I'm gonna have to disagree on the purpose of the droop screws. Droop screws are essentially to limit suspension down travel from rest not for the purpose of adjusting chassis height. Chassis height is changed by adjusting preload (shock collar). Your setup there with no droop (suspension down travel) would make the car skip and lose traction at the slightest uneven surface.
@leoross80883 жыл бұрын
Hey, do you think 40w oil would be good for the rear shocks or is that too close to the stock oil weight to make any difference? I only have 40w and I don’t feel like buying anything else... thanks!
@beyondRC3 жыл бұрын
It will work fine just remember these are rear heavy so a heavy weight oil is better 👍
@joshuasalisbury7892 жыл бұрын
I am so happy with my one of these only problem now is I somehow bent one of the shock shafts so I have to wait till the new one comes
@rogueFactor3 жыл бұрын
droop is life
@beyondRC3 жыл бұрын
you know this! ;P
@Johnny-zu7tb2 жыл бұрын
Hi I’m been looking at this model and I also seen the 104001 and the 124017 which is your recommendation todo spend the money on this for fun and I wish to add more powerful motor and the interior of steel.
@duncanscubie2 жыл бұрын
I like seeing all these videos. No discrimination but these cars are cheap as chips and if i break it ill just buy another one . I own 3 one for my 13 year old and one for my 7 year old and of corse one for me and we have fun out the box and it’s more than enough. Only if you are going for speed runs then this is essential . Or just have fun out of the box
@NsUtubechannel2 жыл бұрын
Should you adjust the spring perch after you lower the car with the screws? It looks as though the springs are compressed too much.
@geraldrossouw4425 Жыл бұрын
Yeah, I picked that up too, he has way too much preload on the springs. The ride height (preload) should be adjusted first by turning the spring collars, the car should sag under its own weight to the correct ride height, with the lower suspension arms about parallel to the ground. The travel limits screws are just that, to limit suspension travel when needed, they are not ride height adjusters.
@dollyrix80243 жыл бұрын
🔥🔥
@justinsantiago197510 ай бұрын
Hello. Is there a good place to get those droop screws?
@eediot693 жыл бұрын
Thanks for the video. Just wondering what weight oil you recommend for the front shocks?
@206beastman2 жыл бұрын
7
@marcrives2793 жыл бұрын
Hi! How did you remove spring from shocks assembly, or put it back? It was on fast forward, I may miss something.
@benlait36963 жыл бұрын
Hi did you keep the stock 30 weight shock oil in the front?
@beyondRC3 жыл бұрын
Thats correct 👍👍
@Sam-nz2zs11 ай бұрын
@@beyondRChi what if I have the 124007. Would you change oil in that? And what oil would you use for front ? And for rear?
@jbsoftwash2 жыл бұрын
What tools do I need to grease the difts? fixing to order car now and if I need a specific tool ima order it ,also any parts I should keep on hand from yr experience?
@206beastman2 жыл бұрын
Is there a new version of this buggy yet I finally got some monies
@beyondRC2 жыл бұрын
there are brushless RTR versions now. 1/14 is 144010, 1/12 is 124017
@markscotchford41593 жыл бұрын
Hello, you finished the brushless conversion yet please? Or did you change your mind?
@beyondRC3 жыл бұрын
kzfaq.info/get/bejne/isWprNx4npnOqHk.html check that out ;)
@flithobbies67083 жыл бұрын
I am in doubt between assembling a hsp 94123 kit or buying a wltoys 124019. what is the best parts durability and best parts price?
@daol033 жыл бұрын
How often should you change the oil in the shocks?
@alexbarquin93 жыл бұрын
What weight do you recommend for the fronts since the rear uses 60wt fir this car? Thanks
@beyondRC3 жыл бұрын
30/40wt
@lovingtanja3 жыл бұрын
Which brushless upgrade do you recommend?
@beyondRC3 жыл бұрын
Any 3650/3660 sized motor in the 3500kv+ range and 60-120a ESC ;)
@Lee-nq5om3 жыл бұрын
Why no just flip the metal bracket instead of taking out and flipping the rubber inserts?
@wanchanel3 жыл бұрын
☝️🏎💨💨💨Wltoys 124019 is the best ✔🇮🇩👍
@beyondRC3 жыл бұрын
Definitely :)
@oblOstBlockLatino3 жыл бұрын
800 Oil WTF. I have 450 oil in my 3.5kg mashine and its still bounci