Nice to see those that are still passionate about the craft especially when everything is either smaller or in a throw away society. Good job from a tech who has been repairing since the vacuum tube days and still going.

FREEEEE TV!!!!!, i found this exact TV on the side of the road under a bunch of boxes waiting for the garbage truck. the wife and I were on a walk through the neighborhood and she walked back with me covering her face because she was so embarrassed by me routing through the neighbors trash. this is what was wrong, I got a new 4k 50" TV. she accepts now that it wasn't a ridiculous idea (this time). i didnt have a heat gun, but i did have a butane pen torch and a fancy kitchen thermometer rated for 500 degrees. so, I layed the thermometer on top of the processer and heated it from about 2-3 inches for short bursts to keep the heat applied the right amount to the immediate area. I am so happy! THANK YOU!

Buddy you just saved me several hundred bucks for a new TV I was ready to go buy since modern tv's are modular and people hardly repair now days. Even though I'm a retired technician I wasn't gonna fix it after I checked the power supply and seemed like it was working, thinking I didn't want to delve into troubleshooting the rest. I live in Canada and everything is harder to find and more expensive than the US. My tv (vizio 43-C1). Taking a chance to buy the main board for a couple hundred $$ including shipping and not getting it to work I thought was not worth it since a new lower end tv would cost 400$. I saw another video where the guy changed the main board three times till the vendor sent him the correct one. So when i saw your video it made sense thinking it kind of reflows the solder beneath the big chips when you heat to 3-4 hundred degrees. But darn, my heat sink is soldered on the board so guess what, couldn't unsolder it obviously because the heat of two solder irons doesn't melt the solder. So I did heat on top of the heat sink to 600 degrees and put it back in the tv and low and behold, it worked. Anyhow, can't thank you enough, keep up the good work!!

Thank you BigDog! I just fixed my Vizio 55 thanks to your Video.. I got a replacement Power board hoping to fix the No power/image problem Just a quick white light on the bottom left and nothing... the new power board did not do anything. I was ready to take the TV to the curb.. and I'm glad I stumble into your video. The Reflow of the Two processors did the Trick! the thermal paste was completely Dry.. I cleaned the two processors really well, added new thermal pads & thermal paste and voila! Got my TV Back. Tank You!

Worked like a charm! When the TV first started the screen was blue for a flash, then green but immediately after started working as normal. It worked so well I also did the board for an M55-C2 that I thought was dead (same symptoms) . I had already paid 75 bucks to a repair shop to fix a M55-C1 last year. Here's a hint too, I used aluminum foil with a small square cut out for the chip so I could shield the rest of the board just in case.

Just came to add to the comments and say this worked for my TV! Thanks for making this awesome video!

So I’ve had this exact same TV for probably 5-7 years now and all of a sudden it wouldn’t turn on. The power light would come on then fade away, then blink one long blink, then 15 blinks after that. I found your video, watched the entire thing, grabbed my heat gun, and watched it over and over again while following the tutorial. The first time I was too afraid to hit the processors with 400*F and it didn’t work, so I took it apart and hit it again this time with a thermometer on the processor and cranked the heat gun up to 500*F while making sure the thermometer showed at least 350*F on the processor. Pressed down and held until connections cooled enough to harden and let it sit for a couple minutes and plugged it in and what do you freaking know… the backlight is now coming on the TV is working again!!!! Thank you so so so much!!!! You just saved me from spending money I literally do not have!! I cannot thank you enough!!!

Thanks for the information. This fixed my Visio D55u-D1 55 inch tv. I would have never had a shot at fixing it until this video. I will add that instead of taking off the heat sink cover, I heated up the opposite side of the circuit board. This method worked for me and the television works great now.

Hi Big Dog. Great videos. I’ve watched a lot of your videos and learnt so much. Ive got the same model Vizio D55U tv with no backlights or picture. The on off light would light but starts to flash repeatedly. I tried everything you suggested in all your videos to no avail. I ordered a replacement main board but when I put that in the symptoms changed a bit where the backlights would now come on and the Vizio logo appeared but then went off with a totally black screen and the on off button flashing 15 times. I got another main board but that was worse. No backlights or picture with that in. The thing that fixed both of the main boards was baking them in the oven at 300F for 10 minutes each. I got the oven up to temperature then put the boards in as they were. No takingany of the heat sinks off or anything. Lo and behold both of them worked once I put them back in my tv with all the original parts, PS, LED bd and TCon bd. One main bd still has a problem with HDMI 5 input but everything else works fine. I’d tried heating the chips up with a heat gun, changing the EEPROMS , swooping out all the other beds . I even replaced all the backlight LED strips as one strip was very dim and another had one LED out . I know you don’t recommend baking the boards in an oven but it’s the only thing that got my tv back up and running. None of the plastic connectors melted or parts fell off. I just left the board in the oven to cool off then put it back in the tv. Thought this might help some of your other viewers as it’s taken me about a month to fix this thing. By the way the power supply for this model only supplies 19 vdc to the main bd and 24 vdc to the led driver bd. The main bd then produces its own 5 vdc standby voltage . The 5 vdc voltage shows up on the power supply connector but it’s not generated there. Thanks again for your great videos. Couldn’t have fixed this tv without your knowledge.

Just a little knowledge for you. When the TV actually fails to boot, the reason why the vizio TV fails to boot is not because of the mainboard, but because of a faulty Google Chromecast, update that came through on the smart TV side of your television set. That's why you get the black screen death and the only way to fix it is to physically quickly press input, get it over to p. C. And then go into settings on menu and do a firmware update.

This corrected the issue with my D55u-D1. I had suspected the bga needed resoldered, but wanted to see if anyone else had the exact same issue. Thank you for posting this video. Another TV saved from the scrap heap!

I never leave a comment on videos but I gotta say thank you very much I've been trying to fix my TV for a month and your video helped me bring my TV back to life !

Just found this same TV in the trash...16 dollar heat gun at harbor freight and boom it's up and running...Thank you sir appreciate the info.

Can't thank you enough for the video! Was able to use this hot air method on my M60-C3 just as I was going to give up on it. Great stuff!

I just wanted to leave a comment here to encourage anyone watching this video on trying this before throwing it away. It works! Thanks, OP!

This Vizio D50u-D1 TV had the same problem! Your fix, fixed it! Thank you so much!

Well, this is the second time I fixed my Vizio TV using this video as a guide. Thanks!

Hey Dog, My Vizio M43-C1 would power up with the "V" logo and the "on" light bright in the left bottom corner then fade with a blank screen. Then the Indicator on light would flash 3 times brightly. I heated the chip you showed after following your disassembly proceedure. My unit is a bit different tho. Anyway, Heated it to about 320° with a heat gun for about 30 seconds. Put it back together and she came back to life. Thanks for your unselfish sharing of knowledge!

Unbelievable. Fixed a dump find 70" 4k Vizio by heating up the microprocessors with a cheap heat gun and some tinfoil. Thank you so much for sharing your talents!!

Holy Heatgun, Big Dog! Thank you, thank you, thank you. You inspired me to try to fix my totally dead E75-E3 using your process. No power, no led, nothing. Bob Jackson, thank you for oven technique…I was barely handy with screwdriver to pull back off TV, so knew I could not do Big Dog stuff. But desperate enough to try the oven exactly as you said. I used glass tray to hold board in oven. Incredibly, It worked 😂😂😂. TV came to life. Great help guys 😅

Thanks for the video. The heat gun repair worked on my Vizio M60-C3. I am happy I watched.

This worked for me after almost throwing out the tv. Thanks for putting this together!

You Are The Master Mr.Big Dog...I'm was doing the Hot Reflow on 380 Degrees,Now I have 2 same Vizio D55u-d1 and I will fix tomorrow following your strategy...Thank you very much for share your Knowledge!!!

Wow, I can't believe it, but so far it appears this fixed my TV! My Vizio 55" had gone "black screen" a week ago so, after watching this, I bought a soldering & rework station off Amazon for $39, did what you did, and now it appears I have a working TV again. Hopefully it will stay that way, but regardless thanks for the great video!

Thank you, sir! My Vizio D55u-D1 had the exact same problem. I followed your steps, heated up both processor units on the main board with a Ryobi cordless heat gun, and the TV is working great now. I did have to use a putty knife to loosen the main board with pink foam blocks from the TV chassis. I also used tinfoil to try to deflect the heat from the other parts of the main board, cutting two holes the size of the processor units. Great video - very much appreciated!

My sister just gave me a M43-C1. It had the heatsink soldered to the main board. It also did not have the blue and red LEDs installed. I used a heat gun on low on the back side of the cooler processor. Heated it to about 400F. Took about 7 minutes. Works great! Thanks! I won't even mention the smoke detector 😜

I also saw the oven treatment; your method is much more precise. Thanks for the great video.

I'm glad I watched this video before I gave up on fixing my Vizio TV. Great job of explaining how the use of a hot air blower can solve a simple problem. I do have a rework station for building kits for my ham radio station. Great video again and thank you.

Many many thanks to you my friend!! Your video helped me bring a D55-E0 back from the dead. Found it had a bad power board (power light finally came on), and then I pulled out my heat gun and reseated the CPU on the mainboard. To my amazement it worked! Thank you so much for saving the day! One thing I did do on this TV (don't recall if it was in this vid) was carefully scrape off the old thermal paste, clean it up with rubbing alcohol, then add new thermal paste to the CPU before reseating the heat dispersion plate. For others watching this video-- make sure you reapply new thermal paste or you could nuke your TV.

Hey! many thanks for this video. I just fixed a Vizio D50u-D1 by heating the same chip you show in the video with my rework hot air gun set to 400C for a couple of minutes. This TV would show the Vizio logo, and go off, and restart a few times. I followed your steps to check the PSU, the LED backlights, the LED board, and then went to work on the mainboard. For anyone attempting, the first time I heated that chip (same as in the video), the TV still didn't work afterwards, so I repeated the process once more. Also in my case that chip wasn't completely cold, it would warm when the TV still didn't work (confirmed with a thermal camera) but I guessed I should try resoldering it anyway, since other than that I would have to replace the board, and that fixed the TV.

Thanks to your video I was able to resucitate my dead 55in Vizio. We'll see how long it last, but definitely thanks for the solution!👍🏼💪🏼

Hi! This Is Adán . I bought a same model an size TV about 3 weeks ago, after watching and followed your awesome video directions, having exactly the same problem I fixed my TV bought locally thru OfferUp for 20 dollars. Thanks for your very interesting videos!!!

Appreciate your level of detail and your no nonsense approach in delivering the information! Well done, dude!

I don't leave comments on KZfaq. However I feel like it's time to give credit when credit is due. I just finished doing this step by step and it works! Thank you for the details. I would like to point out on my smaller 43" version the heat shield was soldered on so that took some time to heat and gently pull apart.and the same putting it back on making sure it was pressing against the chips afterwards. But other then that, it 100% worked for me. Thanks again.

Thank you so much. My Vizio TV has the same black screen problem. According to your instructions, I bought a hot air gun from Amazon, 400 degrees Celsius, and it took about 2 minutes. It had been turned on normally.

Just subscribed to a great detailed video, which I just found today. 4 years ago I sent my 55” Vizio mainboard away to be refurbished for $99 and it is still working great to this day. Symptoms, back then were none of the HMDI inputs receive a signal, so no HMDI devise would work. The rabbit ears worked for local channels, and the AV or component Yellow, red and white worked for older DVD player. Had your video been available 4 years ago I would have tried your fix, since I had to take the TV apart to remove the Mainboard and send it off for refurbishing. I like how you showed how to trouble shoot using a multi-meter on DC volts. Our 42” Vizio works if you do not mind waiting 10-15 minutes for it to warm up. It comes on right away; you just cannot change anything for 10-15 minutes. No volume, up or down change, no change of TV input, etc. We have been living with this for a long time. I took it apart years ago, thinking I would find a bulging capacitor, but they all looked fine, so back together and live with problem. Any ideas?

Hi big brother just to let you know that fast fix really works on my visio65" model p65e1. Almost change the eeprom but after I saw your vlog. I was impressed on that technique...thank you so much!!!God bless and keep on sharing....

Thanks BigDog. I found the same TV today and got it working using your video.I am glad I had a heat gun and some heat sink paste so it was easy to do.

THANK YOU THANK YOU THANK YOU!!! Every other video I found was a total waste of time. I was preparing to have to buy a new tv and found your video. My tv works perfectly now! Can't thank you enough.

I admit your a genius! I am not afraid to attempt this research but I don't have the space or tools. This was an excellent video. Thank You.

TVs are cheap. I'll just pick up another one and forget about all that intricate work, but it was enjoyable watching you work. Great job.

Thank you so much! Thanks to you I could fix my TV that I was to throw it away!! I did exactly the same steps and it works perfectly 👍🏼🙏🏼

Yep fixed a customer's D55U-D1 tv with no video or backlight. Power comes on then fades off. Reflowing that IC fixed the unit. Thanks

Holy crap I followed your steps to the T and sure enough it worked I'm not crazy smart with electronics but Holy crap 😳 I feel like a bad ass now. Thanks my man for the super detailed video and hel0

Thanks brother, excellent video. Never would have thought to check the processors for a cold one, totally fixed my issue.

Thanks! This video helps me to fix my dead VIZIO P55; you helped to save it from the trash. Thank you!

Thanks so much for posting this repair. I have the D50U-D1 and it had the exact same issue with the same processor chip. Thanks to you my TV is now fixed!

Sincerely, thank you! I've got to go get some thermal paste before totally reassembling, but it seems like I've fixed my 8y/o TV! Last week I had my Segway scooter randomly die. I was really defeated, but the next morning, woke up determined to fix it. Replaced the control board, and now it's running like new. Fast forward to this week, and as my luck has it...TV died in the middle of 1993's Malice, starring Alec Baldwin, Nicole Kidman, and Bill Pullman (even a young Gwenyth Paltrow makes an appearance!). I couldn't believe it, never had a TV die on my like that, mid scene. Anyway, I ripped that puppy off the wall and got my screwdriver. Had it apart before pulling up this video, and I knew right away (probably bc of the fire alarm beeping) that you had me covered. 🎉🎉❤

I wanted to leave my thank you @bigdog8882 that after seeing your video, I saved probably more than 100$ on replacement parts. This is my 4th week in after a self repair on my personal vizio d55u-d1. I ended up with a heatgun set to 350 Celsius and used it for about a min overall (because my damn smoke detector kept on going off lol) and it still worked out just fine for me. So thank you for saving me here and hope you keep posting these great videos!

Nice slippers and change the battery in your smoke detector. Good video.

A GREAT VIDEO THANKS SO MUCH I FIXED MY OWN TV THANKS TO YOU MAY THE LORD BLESS YOU FOR MAKING THIS

This was incredibly helpful. Thank you!!! I am up and running. Saved me some moneyyy and now I have a multimeter for future projects :D

Your video helped me fix my Vizio P65-C1. I had it narrowed down to the main board but wasn't quite sure where to go after that. Reflowing the two BGAs did the trick. Thanks!

Hey......!!!!!! Thank you soo much man!!!!! My TV is back up and running!!!!!! It didn't work the first time I heated the processor up but I think I heated the wrong one, so I opened it back up and heated both, turned it on and it worked!!!!! Thank you again!!!!!

Wow…. Just followed you step by step and diagnosed a 4K vizio I bought that someone sold that wouldn’t turn. It has the same issue. No volts on that same top on/off pin. Just subscribed. Shout out to you and @tampatec

Awesome, I am going to try it on my D50u-D1. If it don't work I will look into getting a new motherboard.

Love your stuff BigDog gonna try these trouble shoots tomorrow and if all goes well I’ll put this up in the garage 👍🏼 instead of posting it on offer up for free. Thanks ! keep um coming!

I liked the louder music while you heated the board. Great touch 👍🏼

This worked for me too! I was almost ready to throw the TV away, until I found you. . My heatsink was soldered to the board, and looked like it would be very difficult to remove, so instead I applied a lot of heat directly to the heat sink over the processor and it worked like a charm. In addition, I happened to have a small USB powered fan laying around, so I cut a small hole in the back of the TV case directly over the processor that lost it's connection. Hopefully that will help to keep the temp down and our little repair will last that much longer. Thank you!

Thanks! This worked for me and now my tv is working again. Great job!

Fixed a P65 E1 that had the same problem. Visio actually makes a nice TV

Big thanks - My 7 year old Visio 55" 4K is back in action!

Great video. This technique brought my M60-C3 back to life. Thanks!

I have this exact TV and I’m going to follow these steps to see if it works! I was about to have the TV picked up for a part recycle until I found this :)!!

It worked, thanks for the great video! Not bad fix for a free TV, only 1080P. but great to put in a kids room. Vizio's aren't the best brand and I've ever worked on over the years but it's not the worst brand either. The brand I see with the most problems are LG and Insignia, and all the cheap Chinese brands not many people have heard of. One thing you might have done but missed is to clean the IC's off with a Q-tip and alcohol, then use new thermal grease before you put the big heat-sink back on. That old heat-sink grease is usually all dried up, and running just a few degrees cooler can save years on computers and TV's.

Thanks for this post … my TV is back up and running now

I fixed my friends TV thanks to your video!

Seriously can’t believe this actually worked!!! Thank you soooooooo much for this video!!!!!!

Thank you so much brother you are great man. With this video direction I fixed my vizo TV . it is real information. you save me from out more money for maintenance.

Same tv with same issue. It works perfect now!! Thanks a lot!!!

Hello Sir, thank you so much for this tutorial, it fixed my free TV Vizio.

That was the greatest tutorial EVER!!!! Thank you ! I will let you know if it works

Thanks so much for this video! It worked for me. Saved the tv! Much appreciation!

BigDog you are the man !!! Loved your video bro !!!

Shout out to you..got mine fixed thanks to you .. I did the oven bake on the main board and it did the trick...👍🏻

It did work in my case, but caution is essential to avoid overheating the chip. Unfortunately, that's what occurred in my situation. So far, everything is working, hopefully for another few years

Great video, I'm about to start the same model TV with exactly the same problem. I am a technician and an engineer but my specialty was not TV's, it was power supplies. Retired since 2013, I'll let you know how the outcome of my Vizio that was given to me for free.

Worked like a charm for my Vizo M50-C1. Many Many thanks Big dog

I got the same tv just now by curb. Carried it in well took 10 minutes to find power button. Then I saw the light on front go off if I look inside the back of the tv I see one white light on.I plugged my Xbox into the hdmi and I think I heard sound.This fix is worth a shot .If this works I will send you a tip

Thanks for the video man. Im ginna try that before I throw away my TV.

Dude you need to change the battery in your smoke detector! Thanks for the video.

hey there wanted to come by and show some appreciation , this video helped me a lot i had a vizio m49-c1 that had the same issue and manage to apply the same fix on this video as you recommended , im very happy with the results. thanks again you got a sub with me. and well also i wanted to ask a question if possible. After this specific repair is done how long would the repair last? 😃👍

Thank you so much! I had this exact same issue and this worked!

Worked for me, thank you so much for sharing!!!

Thanks ! will try to fix out my old proscan 43 inch tv

Thanks BigDog, excellent video! My D55U-D1 just failed today with the same signature. I applied your suggested fix and had it working 2hrs later!

@bigdog8802 thank you so much for this fix. I have looked for over a year to replace my main board which is nearly impossible. When they get in-stock they are immediately sold. Was super easy and just use my heat gun instead of a soldering station heat source. Just a small thing..my pads under the board were very sticky and didnt come off without some major care. And there are 3 of the springs that stay in place for sure.. and 3 that are removed. I know in your video you mentioned that.. and it was the same for me. Amazing video A++++++ video!

Great video!! Count me as a new subscriber. I'm going to try this with a D65-D2 that's showing vertical lines on the center of the screen. I have a rework station so I can isolate heat to the chip in question. What does concern me is that the manufacturer mislabeled the voltages, as you pointed out. That's a little scary, especially dealing with electricity.

Bigdog you are definitely the Man and TampaTec. I just fix the same model tv. Thanks

Dude! Thank you so much. I did this to my tv and it totally worked!

it worked on my 50" Vizio thanks 👍

Exactly that on my P552ui-B2 . Thank you for the tip.

Thanks BigDog, you da man! I just fixed my d55u-d1 with the reflow on the processor.

Use a plastic tube to get those clips loose. Diameter inside is just a bit over the diam. of the plastic clip. Makes it really easy to get those clips off.

Just fix mine with your *Technic* Thanks buddy, you're a hell of a Tech ;)

Great video! High quality close ups! Love the slippers!

Thanks for this intel my man! My lady and I just had our 2014 Visio 32" in the bedroom start going "BSOD" after only a few seconds of powering on. You need to change the battery in your smoke detector tho my dude! Ha! I know that "chirp" in the background all too well. Hahaha! Stay safe and well doggins! Peace.

Thank u so much exactly what I needed now the tv works

ok i am attempting another tv fix. bigdog you have helped me so many times thanks chief. Now im working on this same tv. but i have backlights but no image. i was sure a new t-con board would take care of the problem. i was wrong. before i waist more money and time. Can you help a brother out please

Excellent breakdown!! Thank you, Sir.