That was a great rant brother!! You look like a very confident repairman. And a great teacher as well! Cheers-Peace!

Great and aspiring teaching

I cant tell if my capacitors have gone bad but im having the same exact problem so im gonna replace them and hope for the best

The capacitors are arriving tomorrow hopefully this fixes my tv as i need it for work and can't afford to buy a new one

My TCL 65" (65S450G-CA) died today while watching. The screen slowly went dim and now it's black. The backlight works, sound works, no menu's will show. TCL said do a factory reset - but we can't see the pin it tells us to input when trying it (and that's doing it blind watching a video). I don't know what to do.

Had a similar thing with TCL Roku 55' that I had been given. It was a brand new TV that never worked out of the box. Replaced the Main and still would not get past half way through set up. I kept trying and finally it hooked up to internet and was able to update software and began to operate correctly. It was dumb luck. lol

Have you done a video on a KD-65X9005C 3D TV?

Need help. My tv is sharp 4k 70 inch. first my tv was turnnig on we could see the logo and then went off , the stand by red blinking light on,,, so it was a black screen ,,, so we replace the backlights. And it did not work ,, we replace the powerboard and still doing it. We also replace the motherboard ( mainboard) and the t-con and the last board we also replaced , ,, so tv working now ! But now we have this black ghost spot on the top middle of the tv ,,, what can we do now , please help !

Great video. Like taking a Masterclass. I had one helluva time getting the adhesive from the old LED strips off. I guess I rubbed too hard and loosened one of the black plastic corner pieces. It fell off the chassis. Managed to find it - all good. Waiting on the LEDs, just wanted to say thanks.

Didn’t work.

95 volts with the tv unplugged?

Where could I get the backlight to puechase?

Still just turning off and on.

How can I test the led plug without a fancy tester like yours? Can I use a digital multimeter?

Do the full factory reset and if it doesn’t stop get a new tv fam mine broke too

Bro I have same TV and three problem is there screen is darker on the top. Brighter on the bottom. Any advice please? Viewer from Australia 👍😁

Bro I have same TV and three problem is there screen is darker on the top. Brighter on the bottom. Any advice please? Viewer from Australia 👍😁

Music was too loud.

I did it!!!!! I fixed my grandkids tv!!!! Thank you !!!

nice to have a video, but my family will never tolerate me tearing into the tv. I come from the days when I had to go to drug store on weekly basis to test/replace the crazy tubes. Now a days, this is far worse. But thanks for you information.

Hi bigdog, how can i tell the difference between 3v and 6v led's. Hope to hear from you soon, many thanks

You sir are a wizard with these tv:s. Thank you for sharing your knowledge. I'm actually watching your KZfaq video on a TV I repaired, partially due to your information.

I followed all your steps and was able to successfully get it up and running again. Fantastic tutorial. Thank you so much man.

Hisense is pure JUNK

3 years later and it saving me hundreds of dollars, great work

Thanks for the detailed video!

still I can not hit the reason for IC defect , even if you thought me the solution . thanks so much !

I just spent the evening replacing the backlights in my 55LN5700 and your video was the only reason I was able to do it. I hope you have a stellar 4th of July!

Hi thank you big help..fitted new lights strips all lit

Thank you man. My 55x900c did the 4 blinking lights. I followed your steps and it worked. Everyone was stoked its working again. Saved me some cash man. Again. Thanks

Good tnx sir

My 55 xbr900v started the 4 blinking lights today. Hope this works. Almost seems to easy a fix. Thank you in advance

Fyl it's a led not a oled

Hi there. What is the device you are using to apply voltage? I only have a standard multimeter

Yeah wtf is Roku got going on

Excellent video BUT I fixed the backlight problem but ended up with two 3” vertical bars on the left hand side of the Samsung after I’d replaced the backlights. The problem is that when I was originally working around the TV to get the back panel off as you’ve got to be very careful prizing it out from the bottom of the TV because the tool I used cut through two of the brown ribbons (sure there’s a technical name for it). Be very careful and don’t go too deep with the tool you’re using or you’ll slice through them all because they’re very delicate. Watch from the 18:00 minute point so you can see what I’m talking about. Great video though 👌🔥

Bloody brilliant video! Well done. Thanks for taking the time to explain and share.

like/ / / / // /

This video is on point 👌🏾👌🏾👌🏾👌🏾. However, for some reasons my LEDs didn’t light up when I tested it. However!!! Don’t get discouraged!!!! Once I put the tv all back together, it worked like a charm 🙌🏽🙌🏽🙌🏽🙌🏽

Hi, just like you I measure the DC volts at the LED+ point and it shows 230 volts... so something is wrong with the board? should I keep changing the led strips? my tv is LG 32" thank you very much!!

Interesting repair. Carried out efficiently.

Awesome guide! Found out that i cracked the lcd panel when i was moving it lol 😅 still fixed the leds for the fun of it

Great walkthrough! Subscribed 🤘🏽

Where can I find the 350v 10 mf capacitor.. so far I can only find the 10uf

friend can you recommend a good type of solder and flux to use for soldering circuit board ?

All the videos I’ve seen about how to fix this… have inspired me to get a new one.

I gues you need a "OKAY" counter. Thanks for the Video.

electronics lab no matter what I do it is not enough! that's what I learned. mostly if you have OCD(every thing needs to be perfect) it will not..

Awesome video and love your attitude! I came here just looking for ways to be sure that the powersupply in a S95C was the culprit and left with an increased love for electronics. Thank you very much!

Thanks mane. Great overview and test procedure. I still run plasma tvs and will do so until oled come down to a reasonable price point.