Coleman B200 mini bike governor removal and top-speed run

Рет қаралды 27,394

3 ай бұрын

Coleman B200 mini bike governor removal and top-speed run
Removed the governor from the 196-powered Coleman B200 mini bike.
Tested the bike for 0 to 30 and top speed.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: kzfaq.infofea...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Пікірлер: 139

@billwilliamson9842 3 ай бұрын

fastest and first!!!!!!!

@jamesgravel7755 3 ай бұрын

I just rediscovered mini bikes just a couple of months ago and it’s the only hobby I ever had my wife doesn’t care about at all. You must have the same luck. Lol

@samsnephew3209 3 ай бұрын

It is an addiction 100%. Black66 got me started with his experimenting and informative videos, I am satisfied in stage 2. Aluminum flywheel, header pipe, mikuni VM22 26mm carburetor.

@johnspartan5515 2 ай бұрын

Luckily my wife loves mini-bikes, as we have 10 acres of pasture/farmland, and we load them up to take camping down here in Florida!👍 Axis M200 for her, and the Coleman B200 for me. I'm 50, and those things have improved our quality of life tremendously!❤

@King-ru9ve Ай бұрын

Stop acting subordinate to your wife. You’re the Man of the house; you can have whatever hobby you please.. I wish my wife would tell me I couldn’t do something productive..the nerve..

@jamesgravel7755 Ай бұрын

Fuck that. She can bitch all she wants. It don’t change my plans. She learned. But she still bitches about stuff. Doesn’t mean I don’t do it. Lol but mini bikes? She hasn’t had a single gripe. Snowmobiling. She would bitch every time I left for the weekend. Drag racing. Furious when I went to the track. Guns. Hates em. But mini bikes she’s been quite. Lol

@EXPEDITIOIN Ай бұрын

We bought 2 B200RSV's. They will do 36 stock. Love em!

@eyehearther111 3 ай бұрын

That's a nice looking bike. The reds badass.

@xClyptox 3 ай бұрын

Man that red really POPS on those bikes.

@faroutgolf3650 3 ай бұрын

I love your passion it's an addiction, no doubt a feel good one...

@RodneyPittman-mf8ec 3 ай бұрын

You’re the minibike master

@jamesgravel7755 3 ай бұрын

Mini bike godfather

@hellheart1993 3 ай бұрын

Awesome gain of speed

@NubsWithGuns 3 ай бұрын

Neat bike. Looks like a great alternative to a MM212 if one can't or doesn't have the tools to put a bike together. Really looks like my bike in red at first glance, there is a kink or 2 extra in the frame on these if you look at the front in the frame. Love that shade of red also.

@andrewkuhtz 3 ай бұрын

Love the color! Nice looking bike!! Interesting governed speed, my mm212 all stock with a bone stock hemi 212 goes a little over 41mph…like i mentioned before you should fit a 274 Duromax on there and do a build series on it👍

@tylerstrong4669 2 ай бұрын

I was worried about doing away with my it drives me nuts bc I get to a good speed and it'll shut down then u have to let off the gas and give it more. I'd like to just hit the gas and go without going fast, slow, fast, slow. 😂 Thanks for the video! Wish the installation was a bit more detailed showing how you put that linkage back on bc that's worrying me the most I think. Also, mine has a chain, not a belt, so is it any different or basically the same steps? Just don't want to mess anything up since it's brand new.

@heavyd5670 3 ай бұрын

Awesome collection! You should do scrictly a 196cc build, like without swapping it with a predator etc.

@Black66 3 ай бұрын

Yes , good idea!

@6wheeladventure 3 ай бұрын

Great video ! I just picked up a new B200RSV these are so much fun ! What are your thoughts on the plastic cam gear ? So, how about cam and valve springs next, maybe a billet rod too. I'm going to be a good student watching this B200 build !

@Black66 3 ай бұрын

Thanks! The cam gear is ok . I have quite a few videos coming out on this bike.

@eyehearther111 3 ай бұрын

Mini bike withdrawals 😂😂😂 I'm dying laughing

@piratex90 Ай бұрын

loved the video! super helpful just a quick question what size bolt was that for the hole u removed the governor?

@Black66 Ай бұрын

Thanks! Check out the B200 playlist. I used a 1/4x20 bolt in the governor arm hole.

@johnspartan5515 2 ай бұрын

I have both the Axis M200, and the Coleman B200 rsv. I love them both, but each with pros/cons (stock). I do most of my riding on our 10 acres, so the Coleman seems to have way more torque and HP vs the Axis, but the Axis has better tires (knobs, not v-tread) for trail riding, and softer suspension. The stiffer suspension on the Coleman about beats this 50 year old army vet to death!😂👍 If I could make a hybrid, the tires and suspension on the Coleman with the better performance, would be the perfect bike for me.

@isaacbrown511 3 ай бұрын

Ever since I seen these b200s come out I've wanted one

@tylerstrong4669 2 ай бұрын

I just got one and love it! The first one I got, though, I had to take back to tractor supply bc I crunk it up, and it had a bad knock in the lower end of the motor in the front area of the engine. You could really hear it when idling or giving it gas. She said thankfully you brought it back bc it was about to lock up completely she said. She said they may not have shaved the pistons down enough or something. She seemed to know a lot about mini bikes lol. This is my first. I've worKed on vehicles my whole life, so how hard can they be to work on, lol. My cousin got one, so I had to go get one myself! They're on sale rn at tractor supply from almost 1k down to $649 !!! So the time to get one is now if you want one. The second one, I got in the box still and had to put the front tire and handle bars on, and it's been running great. I think I just happen to get that one lemon.

@darintraver4983 3 ай бұрын

Another great video 😎 I wonder how a 420 cc would do in a mini ??? Lol that would open up everything you do again for many more great videos 😎

@Black66 Ай бұрын

Thanks! I'll try and do a big block on the channel at some point.

@Throttle_junky 3 ай бұрын

I have the Coleman b200 similar to yours and I have a 212 predator with chain on left side and also have a jack shaft I have added a header pipe. removed the carb I believe I purchased the wrong carb which was a stock carb with jet screw and dirt bike carb is needed. I have a 60 tooth on the rear I believe and stock 10 tooth sprocket

@SDS-1 3 ай бұрын

I think exhaust upgrades. Like test different bolt on options and then experiment with vapor carb systems. Really really curious what you come up with on that.

@Dirt-knees 3 ай бұрын

Along with a few others…. I have the same bike and want you to build the stock motor. Red Beard did a budget build on the b200RSV….I’m waiting to see what you come up with before ordering parts 😂 Great videos !!! Thxs

@Black66 3 ай бұрын

Thanks! Yes, I have more videos to come with the 196 on this bike.

@thundercatt5265 3 ай бұрын

My 80 BBK not the 72cc upgrades they call 80's but a true 81 cc motor with a big valve head and hybrid supercharger will hit speeds of 70 + ,man I took a old dirt bike engine I had apart,the guy said it was a 50 ..but when I pulled the piston out i found it was actually a 70 cc stroker piston , that explains why it was so fast if i can get a gy6 stroker crankshaft im gonna use it on my 80 , I might have to get a whole new crankcase to make it work

@tormentorxl2732 3 ай бұрын

The cvt transmission bikes usually are in the 30’s.

@Tyresong 3 ай бұрын

what should you do to make it faster? a 4 inch zoomie and a jet, and just leave the plastic cover off the airbox

@Whatwhat953 29 күн бұрын

Can removing governer and loosening throttle screw better exhaust and intake including carb hurt or blow up the engine

@eyehearther111 3 ай бұрын

You should just turn it into a E bike or just 196cc build. Everything about the bikes badass. Do the exhaust next.

@conkretescott 16 күн бұрын

What air pressure are you running in the tires. I have the recommended 10psi and my tires feel like eggs, no round but lumpy

@billwilliamson9842 3 ай бұрын

I'd love to see a video where the secondary/driven gets tuned on a stock bike like this, maybe with a camera mounted on the driven to see when it makes the shift from "low" to "high" and at what mph and rpm this happens. Then use another hole for the drivens spring and record the 0-30 and top end times to see if this changes at all. Maybe even get the drill out to find tune the secondarys spring location even further. Like to see that done on a stock cam bike and then maybe add a rod/flywheel/carb/cam/juggernaut and fine tune the driven/secondary for the higher rpms to show any gains. The tuning of the juggernauts stall with all 3 sets of GPS springs/rollers and the secondarys stock red and then a yellow spring to show the same sorts of things. I think this seems like wizadry to a lot of guys and this could really help take the magic out of it so guys understand how these cvt's work and how changing certain things can help and hurt performance.

@lucassarchet6712 3 ай бұрын

If you look through his videos, Dave has done one about all of this.

@billwilliamson9842 3 ай бұрын

@@lucassarchet6712 oh cool, i'll have to check it out. thanks

@Deucealive75 3 ай бұрын

With the stock driver I go right to the extreme and use the yellow spring in the tightest hole in the driven for the highest RPM at the belt shift. But I have never tested this with a stock engine and stock gearing. The Juggernaut behavior and gearing are so different than the stock driver that a heavy tension spring in the driven is not needed. The light tension green spring may be the way to go with the Juggernaut.

@davidpearson8043 3 ай бұрын

Would love to see more mods on this bike!

@Black66 3 ай бұрын

I have more videos coming out with this bike .

@bombink1968 Ай бұрын

What screw did you use to replace the rod in the top? If you recall. Great video! VERY detailed

@Black66 Ай бұрын

This video shows the bolts used at 6.45 into the video kzfaq.info/get/bejne/aJOEqMteycrQoJ8.html

@bombink1968 29 күн бұрын

@Black66 Roger that, 1/4 by 20. You the man. I know ZERO about these and you are making it very comfortable to try. Thanks for all you do in the community.

@Black66 29 күн бұрын

@@bombink1968 Thanks for watching the videos!

@seanbishop07 8 күн бұрын

My Coleman b200r is stuck wide open since day one from the store I checked the throttle body bolt and carb return spring but my jackshaft chain is super tight can that be the issue?

@hectorkills1 16 күн бұрын

Do you have to have front and rear brakes to be street legal in az

@groskreutzzdsinn17 2 ай бұрын

Can you please do a mega moto 212 rear swing arm kit from gopowersports install video on this b200 model?? Will it require extra fabrication to the frame?

@Black66 2 ай бұрын

I thought about it.

@darrellnichter9894 3 ай бұрын

Free mods only on this bike to see what you can improve? I've even drilled speed holes in a muffler after drilling out the jet. Also check driven pulley for spring placement. Gained alot

@ih8france359 3 ай бұрын

Where was your pully spring originally, and what did you change it to?

@gregswafford9839 3 ай бұрын

I can't be the only one wondering what's going on beyond that fence you always do your 0-30 runs at? That some kind of mining? These new coleman bikes are nice I would like to try one of these see how comfortable they are.

@Black66 3 ай бұрын

Its a quarry. The bike is very comfortable. Handles well.

@damionsparksgonzalez-.-1681 3 ай бұрын

Would You Recommend Changing More Internals After Governor Removal?

@Black66 3 ай бұрын

It should be ok with the stock carb and muffler. When I start spinning it harder I will add the billet parts.

@StickyMorty 3 ай бұрын

What app did you use to find out your speed

@Black66 3 ай бұрын

I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.

@JLeezy864 3 ай бұрын

Do you have a more in depth video of the governor removal and would it be safe for the motor to run like this with no other mods?

@Black66 3 ай бұрын

The 100-dollar Predator video shows the governor removal. kzfaq.info/get/bejne/o56Rgq-e2uDQdWw.html

@JLeezy864 3 ай бұрын

@Black66 thank you sir. You are the greatest. Does this also work for the 224 predator?

@ant123_2 2 ай бұрын

what thread is that governor bolt or is it already on the bike?

@Black66 2 ай бұрын

Check out the B200 playlist for the governor removal video. kzfaq.info/get/bejne/ebFko5Cavrrbdps.html

@adanvaldez6516 4 күн бұрын

What is the governor and what is the function?

@d2nasty696 3 ай бұрын

I get 32mph on my B200 as well. No mods just removed the bolt that limits the throttle

@Black66 3 ай бұрын

Check out the other videos in the series on this bike.

@erika9664 3 ай бұрын

What app do you use for the speed tests?

@Black66 3 ай бұрын

I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.

@erika9664 3 ай бұрын

Thanks so much for getting back to me! Always love the content

@Black66 3 ай бұрын

@@erika9664Thanks for watching the videos!

@GreasedUpDeafGuys 3 ай бұрын

Try a wildcat 223 build

@aidancox450 Ай бұрын

Do you drain the oil before taking off the governor ?

@cristiangambino7626 Ай бұрын

Yes

@samaxeman123 3 ай бұрын

you should do a duromax 500cc minibike build, 1 inch shaft big block beast..

@Black66 3 ай бұрын

That would be cool!

@miguelruiz2399 2 ай бұрын

Do u have a step by step how to remove the governor the video played to fast couldn’t catch up. Thank you !

@Black66 2 ай бұрын

Yes, check out the other playlist on the channel. There are many governor removal videos . kzfaq.info/get/bejne/Z6eXpc6BrZ6daGQ.html

@parallelmonkey4147 27 күн бұрын

Can I buy one

@pauseandlisten Ай бұрын

Anyone know if the B200 would survive a direct CME or EMP?

@NONAME-kw3pu 3 ай бұрын

cm .265 lift cam, ported head, billet rod n flywheel, .009 head gasket... the usual stuff that normal ppl can afford to do... and 22mm chikuni carb. be sure tell us which jet size ur running & at what altitude u are. 125 @3700 ft? is that good enuf? means even bigger jet closer to sea level. air is thinner at higher elevations than at sea level

@Black66 3 ай бұрын

Yes, good plan! I would like to do a 196. Haven't did that yet.

@dabosssr24 3 ай бұрын

My b200 is a little different than that one. Mine has jackshaft plate like the previous colemans instead of torque converter, different light than yours and no front brakes. Also noticed my side plastics are a little bigger. Coleman must offer a couple different versions of these

@Black66 3 ай бұрын

There is the B200RSV which has front and rear suspension with a torque converter. The B200R has front suspension with a jack shaft and then the B200 which has front suspension and a torque converter . and a couple of sub models.

@Callofdutyjoey 3 ай бұрын

@@Black66yeah they even have another different model like the b200c but it’s just like the b200rsv I’m pretty sure

@Callofdutyjoey 3 ай бұрын

@@Black66I’ve got the b200 r also with the 196 on it and chain driven jackshaft, got it to go 24mph from the factory and removed the governor screw and got to 28mph. After all that I switched it to straight chain with the stock 10t clutch on front and 50 out back and got it to do 45mph on the street and 50mph on a fairly steep downhill. More mods to come for it soon like a header pipe and probably full governor removal and a different carb because the stock one has no bolt on the bowl to change the jetting. That’s a cool bike you’ve got there along with the rest.

@O.B.C.D 3 ай бұрын

Your in az just like me but im in bullhaed city im guessing you are in Kingman or phenix or something

@Black66 Ай бұрын

Kingman

@O.B.C.D Ай бұрын

@@Black66 no way bro we are both being cooked out here lol 😆

@Black66 Ай бұрын

@@O.B.C.D Kingman is a little bit cooler. Elevation👍👍

@Throttle_junky 3 ай бұрын

I watch a lot of your videos and Im trying to get it to go to 60 65 its stuck at 34 with governor by pass link to carb so only thing I've done is carb and header and I don't like the stock carb I purchased and the stock carb that came on it are non adjustable

@Black66 3 ай бұрын

I have many videos coming out on this bike. Stay tuned!

@jaxsonjanneyoutdoors1263 Ай бұрын

5:16 where did you get the black screw

@Black66 Ай бұрын

Hardware store bolt bin.

@eyehearther111 3 ай бұрын

Is that colemans newest bike? Very clean all around.

@Black66 3 ай бұрын

Yeah one of them. They have a few different models

@eyehearther111 3 ай бұрын

@Black66 idk maybe I'm tripping but the look of the bike is way better then the older colemans.

@Black66 3 ай бұрын

@@eyehearther111 Yeah, This Model looks simular to a Mega Moto 212

@eyehearther111 3 ай бұрын

@Black66 yes indeed it does. Can't wait to see it in person.

@egidio6david0 3 ай бұрын

Remove Governor, install dual hub motorz lol. I want to see you race the alien..

@thomastaylor2513 3 ай бұрын

Gee guy you got more bikes then Jimmy Carter had peanuts

@Black66 3 ай бұрын

LOL yes.😂

@andrewkuhtz 3 ай бұрын

Lol

@justinjones459 2 ай бұрын

How fast does that one go I have the cheaper version of that one I guess you could say

@Black66 2 ай бұрын

Check out the B200 playlist for the engine build and top speed runs with this bike . kzfaq.info/get/bejne/oNCkmaWa2qmqf4E.html

@justinjones459 2 ай бұрын

@@Black66 i actually did watch a few but it’s not exactly the same bike but I do know it is the same engine

@Black66 2 ай бұрын

@@justinjones459 Yes, there are a few different models of this bike. The B200 with the torque converter, the B200R with the jack shaft and the RSV with the rear suspension, and a few sub model models.

@justinjones459 2 ай бұрын

@@Black66 wow good to know thank u

@justinjones459 Ай бұрын

@@Black66do u know much about the b200r?

@Sim_racer_40oz 3 ай бұрын

Now what’s the best mini bike frame???

@Black66 3 ай бұрын

That's a matter of opinion.

@christophermullikin3688 3 ай бұрын

I want a racing carb

@thomastaylor2513 3 ай бұрын

Looks like someone unscrewed the throttle stop screw

@fresnobassn744 3 ай бұрын

Man I'm having problems with my 2 mini bikes these suckers only stay on choke But when i put them to Run Position they trun off 🤦‍♂️. Anybody knows ?🙏

@Black66 3 ай бұрын

Yes, check out this video kzfaq.info/get/bejne/mJuSjJBizK-7h58.html

@Ediesel1shorts 3 ай бұрын

Dude I have a coleman b200

@medacolden9458 3 ай бұрын

You're an addict... a mini bike addict 😂

@dl1k072 3 ай бұрын

Is the internal governor gear really just that easy to remove?

@Black66 3 ай бұрын

Yes, especially if you remove the flywheel and knock out the pin hold on the gear.

@S200. 3 ай бұрын

I'm surprised that it came with a torque converter. Usually those run the clutch

@Black66 3 ай бұрын

There are a few different models of the B200

@victorcontreras9097 3 ай бұрын

Will you change the engine at some point? To a predator

@Black66 3 ай бұрын

I have a five or six videos in the series so far . I have a couple more to do and then after that I might do an engine swap.

@ibra7723 3 ай бұрын

Try upgrading it to billet internals. I wanna see somewhere near 70mph

@Black66 3 ай бұрын

I'll do that. Haven't done a 196 yet...

@ibra7723 3 ай бұрын

@@Black66 Yea I’m gonna build the same exact bike that’s why I asked. I kind of wanted a guide since I wanted to save money and not buy a predator

@Deucealive75 3 ай бұрын

@@ibra7723 Good for you. The 196 is fine with mild to moderate builds. But if you want big power it's best to start with a bigger engine.

@IsaacsRCs 3 ай бұрын

Throttle screw removal

@Black66 3 ай бұрын

Its not using a throttle screw with the governor removed

@eyehearther111 3 ай бұрын

I don't think you have enough bikes. I see in the video you had more open space to fill up in the garage 😂 maybe have your wife start parking outside the garage. 😊😊

@Black66 3 ай бұрын

Yes , great idea! 😀

@eyehearther111 3 ай бұрын

@@Black66 😂😂

@groskreutzzdsinn17 2 ай бұрын

Its still got the throttle stop!! Lol

@Black66 Ай бұрын

The throttle stop is unscrewed all the way in the speed test. Check out the playlist for many more engine mods with this bike. Thanks for watching!