You are a very talented blacksmith and artist. Got to be dedicated to be forging outside in the snow. Thank you for the demo.

Just watched this! Absolutely amazing. I do horseshoe art but nothing even close as yours. Great job!

Beautiful craftsmanship Sir.

Those are beautiful. You said something that I try to do and teach others. " don't give up till it is done" I see a lot of stuff people make that just needed more time and a few more hits with the hammer and it would have been done. Don't quit until it is done.

Well done Chandler and thank you for your time and videos. Great stuff!!

Thanks for the video the techniques you show for correcting little imperfections really helped me get a better looking end product always like watching your videos cheers Curtis

I'm glad to see you back at it!

Flaw? There's no flaw! Gorgeous!

good to have you back!

Thanks for the video! You show all the steps so others can forge one too. Good job!

Looks great Thanks for taking the time to upload

Glad your back I really missed your videos

Beautiful job,thanks for sticking it out in the cold weather

Chandler, I've watched and enjoyed MANY of your videos and enjoy them very much. Keep up the good work.

Great seeing you forging again

Very cool, you are a good hand. I shoe horses and use a forge and anvil everyday but not much artsy stuff. I am going out to give this a go. I plan to make a trellis for my daughters wedding and your horseshoe heart might just be what I use to fill the trellis. Thank you!

Its 3am here, so I probably wont even remember watching this, but let me tell you something, Im really glad to see your work again!

Chandler, just want to say you sir are good at what you do. you have inspired me to pick up black smithing m keep up the good work.

Fantastic as always. Thank you for sharing!

I finally gave this a try today.....I need practice! Thanks for the video and tips Chandler. I'm going to keep trying.

Looks brilliant, I can't do the things you do but I love watching your videos, hopefully one day I can get into it and make things like yourself. Keep up the excellent work.

gorgeous. Lovein the older videos Chandler. Dont get me wrong the new ones blow me away, but love seeing the progression

It's good to see you're back to making this art again

Very Cool! Chandler!I finally got my own shop up and running and hammered out a couple of hearts for Valentine Day presents. Actually several hearts because the first ones were pretty lousy. Hard to get the symmetry. Welded on three hammered legs and made counter trivets for hot pans to emulate fireplace trivets from the 18th century. Enjoy your videos and artistry. Now to find some horse shoes.

Very nice. I'll have to make my mother one. Can't wait for the next one!

Now that turned out very nice!!

Love your videos. Keep up the great work.

THIS IS SO COOL I LOVE THE FIRE INTRO

Good job man! Very beautiful work!!

woah, it's really nice! And thanks for taking the time to upload these videos, I really enjoy them :)

Awesome! Good to see ya back at it, I really love your videos :)

Beautiful job my friend keep posting more videos, forging is an amazing technique that not everybody can do👌👊

WOW !! That was so cool excellent job my friend you are great in forging.Will check your channel.

Beautiful done and as well important ,very well explained and demonstrated, love your performance, thanks so much.

Precioso!! Eres un artista

awesome work Chandler.

looks great to me pard. ! ...happy trails...

That kinda hurt me too when you said your anvil sucks! You could probably use some hard surfacing rod like a frog mang rod and then have machined down. Just keep pounding. I really enjoy your video's. Thanks! Dave

Yes! your back!

Amazing as always!

I love this project ,started doing one today but had to break off to repair the anvil with hard facing rods as I dident have a sharp edge on anvil so a job with a job ,will grind anvil up tomoro then maybe try again .keep em coming ,ant from Wales UK

Really beautiful work.

WOW my sister would love one of those!

hey he's back. missed your videos chief! hope all's well back there.

Nice work, going to make one (without the heart) for a friend of mine who has a ranch in North Dakota, bottom center I'll add a rams head on top with a twisted shaft and a hook on bottom for a hat, ought to be fun, thanks for the tip on the horse heads.

Thank you so much Chandler! You know I've been looking forward to this video for awhile and now I can't wait till the next time I get to do some forging cause this is without a doubt my next project. As a side note, I recently got a blacksmithing tip from a friend of mine you might be interested in: harbor frieght sells end nippers (item #42266) that are fairly useless at their intended job, but can be easily turned into a good pair of tongs with a bit of forge work. My friend made a pair of wolf-jaw tongs with them that work just as good as the pair I bought Blakcksmith Depot.

I think it looks awesome! Very cool. Wish I could learn to blacksmith... maybe once I get my own property instead of living in an apartment.

think about the old Harbor Freight anvil. i like it. The change did the trick. You are a true artist.

AWESOME MAN!

Great lesson ,thanks

Thank you buddy I am healing better I really am but buddy I really love rewatching your work to help me do my forging thank you buddy

Really nice!

A hell of a heart !!!

Very creative.

Nice job!!!

awesome idea.

pretty cool, if you ask me!

Very Cool, sir... Thank you...

awesome job

Welcome back

Amazing.

Very cool.

it doesn't suck, gotta love a coleslaw., but you have to hunt an edge :) Thanks for the project idea!

outstanding work\

Man that was bad ass I am going to try tie make the wife one for Xmas thanks really good video like how you explain the process

Great job... i had the same crap weather here in mass today it sux...

nice to see you uploading vids again. i been making skull head knives out of spikes. it was fun at first till i got better at doing it. now i get too pissed off when i cant get something to do what i want it to do. i think i do better on my first attempt at anything. Then when i try to replicate shit falls all to hell.

Спасибо за идею!!! Жене́ такой, только подсвечник, сделаю на день рождения.

You said your anvil sucks in the video....I'd be so happy with that anvil

Subscribed!

I like it. Leave the nail in it. Do you wax or paint them? Very beautiful. Thank you for sharing.

Damn you’re good

I must get one.

Nice

great stuff; may try to make one for the wife

What kind of metal are your horseshoes

👍👍❤

So did you just scrub it with a wire brush to clean it?

you should do some old Victorian hair dresser scissors that whould be sweet!!

Beautiful work. I have a question for you, sir. I do a bit of hobby welding, including horseshoe designs. I want to be able to straighten shoes for making letters. I assume that you use a forge for heating the shoes in the work that you do. Being that a forge would be a hefty investment for my purpose, could you recommend a different method for getting the metal hot enough to be malleable? Would a propane torch for instance produce enough heat/ heat enough of the shoe? (I weld with flux-cored wire and do not have acetylene for heating) Eventually I may get to the point where I want to shape the metal the way you are with hand tools and the anvil. The horse heads are really nice looking.

def a fan of your work and style man.. hope your doin better buddy! F beotches... get Anvils!

I have been watching your vids for a while and iam wondering are you a professional blacksmith

MAKE ME A KUKRI BLADE!

You could as well make it for someone to hang up but hand Feathers with beads al the bottom of the horse shoe

I have a question why didn't you just straighten the shoe out is there a reason

hey, what kind of anvil do you have?

Do you sell the hearts and if so how much

What do you charge for this, if you don't mind me asking?

Just an idea, i bet if you made a similar type of design, only make em two dolphins, they'd sell like hotcakes.

so, where can i buy one?

I love it dude. I make a lot of horseshoe art. I typically use my oxy acetylene torch for making my heart's. I do believe I am in need of a forge. I also cut mine in half and then weld the halves together. I'm on Instagram @ Jim Rodgers and underthehoodwelding.

i see you use the half hammer!

Very nice do you care if I borrow your design

you should make'em 100% simetric.

Hi Just in case you wonder if anyone still care about You Your Ways and Work. Yes I think you where defenetly a plus to the blacksmith community .Didn't found any to match Chandler Dickinson .

I watched you +Chandler Dickinson make one of these in Oneida yesterday at the craft show. Great work! And I will definitely check out your store at www.etsy.com/shop/McFinleysCabin !

If I had money, I'd tell you to shut up and take it!

tbh nobody cares how you do it they just want to see the end product nd a little bit how not like step by step every small deatail