Bleeding your Ducati Panigale V4 Rear Brakes

Рет қаралды 10,538

3 жыл бұрын

Simple video today peeps. We're bleeding the rear brakes on the Panigale V4 Speciale. Rear sportbike brakes can be a bear to bleed because gravity isn't working with you and the Panigale V4 was no exception until I discovered what the the problem is/was. Check it out!
Social Media:
Patreon: / esbklife
Instagram: / esbklife
Facebook: / esbklife
Music:
/ datsunnmusic
Bleeding your Ducati Panigale V4 Rear Brakes

Пікірлер: 42

@grahambrown5874 6 ай бұрын

Great video. Be careful using that hub stand because one wheel is half over the edge of the table. I would replace the stand or make a side extension from angle iron, to avoid a bad accident. Be safe 👍

@ESBKLife 6 ай бұрын

Yeah I know. K&L makes width extensions for the lift, I just keep forgetting to order them lol.

@carlitodesouza1602 2 жыл бұрын

Excellent and informative. Really good video quality, and easy to see the different parts as you work on them. Thank for posting this!

@user-iq4go4fg5t Жыл бұрын

Perfect solution, Thanks for posting mate

@lennykibbs260 6 ай бұрын

Great tip with the caliper

@travistran9971 3 жыл бұрын

Thanks so much. I replaced a new caliper and didn’t what I did wrong. From your video, I detached the whole unit and placed two lawn edger blades to simulate the rotor. I was able to bleed a lot if air out that I didn’t have to do when replacing pads. Thanks again!

@radwanghazimoumeh 3 жыл бұрын

this is amazing derrick. jesus i struggle SO much with my rear brembo brake on my MV Agusta F3 (mounted exactly like your V4). great tip on having the caliper hanging so the air escapes out.

@ESBKLife 3 жыл бұрын

This isn’t a fool proof way to get all air out of the system, but it should help.

@larsdee8287 Жыл бұрын

Thank you 👍🏻👍🏻👍🏻

@Bahe-ny6rt 11 ай бұрын

Thanks a million; Bro!!!! I already became desperate....

@darylcav6285 3 жыл бұрын

Thank you!

@visiusvisius Жыл бұрын

Thnaks broo 👌👌👍👍💪💪

@miken9449 3 жыл бұрын

I'm guessing the speed bleeder remains locked in place which maintains a solid vacuum to really removed air bubbles. I was getting nowhere using a Mityvac until I put teflon tap on bleeder threads which allowed for a good vacuum to really pull air out of whatever nooks and crannies exist. Now brake works like new. Using the gap gage is a good tip, thanks!

@robertmalone731 Жыл бұрын

Great video. Your explanations are clear and concise. Great tip on the feeler gauge technique - solves a problem I had with my Ducati for a long time! Thanks.

@user-iq4go4fg5t Жыл бұрын

I’ll also change the clutch bleeder valve to a Stahlbus also…

@johnla1082 2 жыл бұрын

Thank you so much for doing this video. I’m going to order a 4 pack of the check valves and replace my front break bleeders too. What size thread fits your Brembos? Thanks again!

@ESBKLife 2 жыл бұрын

www.stahlbus.com/info/images/Downloads/Stahlbus-Motorrad-Gewindetabelle.pdf. Just select your bike and they’ll tell you what fits!!👍🏿

@justingrimberg90 2 жыл бұрын

Nice video ! Thanks for taking time to share. Question. I have a 21 panigale v4s. Do you know the model number of the stahlbus bleeder valve for the rear brake? Do you know the stahlbus bleeders for front calipers, and clutch and clutch master cylinder bleeder? Thanks

@ESBKLife 2 жыл бұрын

What’s up Justin. I don’t know the part number off hand. But if you go to the Stahbus website they have configuration page for their bleeders. You just find your year make and model then go across to see the bleeders available for it.

@PastarocketS-sb7nk 3 жыл бұрын

Sell the Rizoma rear brake fluid reservoir. You want to be able to 👀 your fluid level. Buy a Ducabike billet cap for your stock reservoir. They come in different colors and with carbon fiber inserts. Any further thought on insertion of a Ducati V4 motor into your F4? BTW: Was happy you were wearing Ducati attire, instead of Patriots garb...😉

@ESBKLife 3 жыл бұрын

I’m probably going keep it as a parts bike. I don’t have the time for Project like a Ducati motor swap lol. If I can find an F4 motor I’ll drop that in it.

@mosoliman4489 3 жыл бұрын

Derrek I forgot to ask you are the T shirts you offer still available for order a while back I bought a couple off you if possible I would like to reorder the same but a size bigger XXL if possible just let me know much appreciate it

@prothewful 2 ай бұрын

Dude, love your sprocket and hub carrier! What make are they?

@ESBKLife 2 ай бұрын

Thx bud!! They are from AEM Factory. You can check out my install video here kzfaq.info/get/bejne/j76CqcacqqneaZ8.html

@prothewful 2 ай бұрын

@@ESBKLife cheers mate

@mariorivas8276 2 жыл бұрын

Hey if you use a diagnostic tool to check the check engine lights and reset service lights which one do you use or would recommend?

@ESBKLife 2 жыл бұрын

Hey Mario. I’m not aware of one being available to the general public for the V4 Panigale. That doesn’t mean there isn’t one, just I don’t know about it. Having said that, I’m fortunate enough to have an Indy close to me that’s a Ducati master tech with the Ducati diag tool. In fact, he reset my service light 3 weeks ago lol.

@SniperMan5858 Жыл бұрын

Where'd you get that hoodie?!

@ESBKLife Жыл бұрын

I got it at Laguna Seca at a World SBK event many many moons ago when World SBK still visited this venue lol

@CarlosMorales-he2wt Жыл бұрын

Hi, I have one question, what measures It is the Stahlbus? I want to buy one for front and rear.

@ESBKLife 9 ай бұрын

Hey Carlos, Sorry for the super late reply. I'm sure you've figured it out by now. But Stahlbus has a fitment chart for your bike. It lists all of the sizes for the various bleeder valves on the bike.

@darylcav6285 3 жыл бұрын

What was the brand of bleeders? And where to get them? Thank you

@ESBKLife 3 жыл бұрын

The reverse brake bleeds is a V-5 bleeder. I think I got it on Amazon. The pneumatic bleeder is a harbor freight brand.

@darylcav6285 3 жыл бұрын

What I meant was the bleed nipple, I’m trying to bleed the rear brake on my monster 1200r and the nipple is letting air back in the line, frustrating

@ESBKLife 3 жыл бұрын

Ahhh. Its a speed bleeder from stahlbus. I ordered it directly from their website, www.stahlbus.com/products/en/bleeding-system/index.php

@Whatever_Rad Жыл бұрын

Is this the same for the 2020 V4. Streetfighter???

@ESBKLife Жыл бұрын

I don't have a SF but seeing that bike is basically a naked version of a fully faired Panigale, I'd be surprised if it wasn't either the same or a very similar process.

@okanzorlu4012 Жыл бұрын

Did anyone Know the torque ?

@stealthdoocatee 2 жыл бұрын

Do you absolutely have to pull the rear wheel ?

@ESBKLife 2 жыл бұрын

No but you’ll have a lot more room to work if you do. Also, if you try to use the same process I did, you might run into caliper to wheel clearance issues when rotating the caliper vertically if you don’t remove the wheel?