BMW E30 2.8 M20 STROKER BUILD
Рет қаралды 1,965
9 ай бұрынA short video showing one of my M20 Stroker builds. my engine builds have a key focus on attention to detail ,Power and reliability.
@dmc5681 8 ай бұрын
With the 130mm rod (-5mm) and 9mm more stroke (+4.5mm throw) the piston sits 0.5mm further below deck than a stock m20b25. It’s a good idea to machine a bit more off deck or use thinner gasket to optimise CR and squish
@rosscato8745 7 ай бұрын
Hi Jon, I’m running this exact setup in my 88 convertible. Pulls like a train, but still running the stock 2.5 ECU and I always feel like there’s more there to give but not sure how to unlock it. Any hints on a better ECU option for the stroker?
@guitarman376 5 ай бұрын
I have heard excellent reports from Sssquid chip tunes. If you aren't already running a 272 cam you are leaving a lot on the table as well.
ОВР Шоу
Рет қаралды 8 МЛН
Grace Engine Developments
Рет қаралды 7 М.
Autotopia LA
Рет қаралды 201 М.
Restore It
Рет қаралды 926 М.
Super Bimmer Bros
Рет қаралды 31 М.
Bad E30
Рет қаралды 11 М.