BMW E30 318is engine rebuild

Рет қаралды 81,692

8 жыл бұрын

Since July 2011 owner of this E30 318is, built in september 1989 and painted in the color 'Sterling Silber'.
I bought the car with 222.228 km's on it and did the rebuilt (with help from a friend) on 252.772 km's without any known engine problems except some worn camshaft sprockets.
The plan was to keep the original engine block and pistons but due some piston wear in the piston walls, the block is completely overhauled by a revision shop; bored and fitted with +0,25mm oversized pistons. So it became a total engine rebuilt.
The cilinder head is also brand new with new cams, valves, springs..
The entire rebuilt took us approximately 2 months and was a really pleasant job to do, even for our first rebuilt!

Пікірлер: 76

@christophercoyle4907 8 жыл бұрын

I have an 89 318is brilliant rot with 59,000 Kilometers, German car, trying to import to Switzerland, the extensive work put in to bring your bay back to new is insane, its a credit to you!

@anavenezuela4125 5 жыл бұрын

This is not work... This is THE WORK® Spectacular.

@AliasHSW Жыл бұрын

Thanks for the inspiration. Can’t wait to rebuild my m42. 1991 US spec e30: 318is.

@theretrogeek2281 4 жыл бұрын

And that’s how a true nut and bolt restoration should be!

@frfrpr 8 жыл бұрын

Exceptional job... the slideshow was much better than the film work. Either way this is an inspiring video. Thanks

@bmwbavarianmotorworks5421 8 жыл бұрын

Finding parts and rebuilding the engine on my 1981 BMW M1 was a bit tricky, especially lifting it out because it's such a tight fit

@marcd7332 7 жыл бұрын

BMW Bavarian Motor Works you seriously own an M1?

@mr.actiongal1017 7 жыл бұрын

this is what I like to see

@anthonylee7263 3 жыл бұрын

Nice job!

@EmmanuelAddoGyebi 6 жыл бұрын

I love this man...Good Work Done

@thegoldentench 8 жыл бұрын

looks like it's just rolled out of factory!! I'm hoping to rebuild my m42 soon in preparation for an eaton m45 supercharger

@ahrred3127 4 жыл бұрын

@ekim andersom how can adding supercharger mean ruining it?

@laurenthart9132 3 жыл бұрын

@@ahrred3127 simple, block cant handle it, m42s are strong but not made for superchargers

@molliarti 8 жыл бұрын

oooo dude,this is a big big job,congrats more congrats,reborn this vano and engine is impressive and long video is perfect,more thanks and best wishes with your Bmw.

@ryansardjoemissier5430 7 жыл бұрын

Loving it. Very much nice work

@muisphil 7 жыл бұрын

Ryan Sardjoe Missier thanks!

@KrystoHartge 5 жыл бұрын

Amazing I wish mine looked this mint

@vkendal88 7 жыл бұрын

Damn thats clean!!!

@oyaustalan5108 7 жыл бұрын

wonderful engine thanks 😂

@johnburns2485 8 жыл бұрын

lovely :-)

@unechaise2655 5 жыл бұрын

wow.. congrat..

@cherryizaiah 8 жыл бұрын

I hope I can get my 318is back from my friend. I shouldn't have sold it.):

@vitalyandryushin9053 8 жыл бұрын

You know, i got my e30 318is from a guy, and he called me after one year, asking me if i could sell it back to him... This is a classic car that you should keep, whatever it takes. Get it back if you can!

@yahtadi5152 8 жыл бұрын

Wow.. it was even too good condition before rebuild

@selespeed3 7 жыл бұрын

Where can I get a good m42 engine with all associated dme , and wire looms to install onto my e30

@darwandoo 2 жыл бұрын

How much would a rebuild like this cost

@FedorLammers 6 жыл бұрын

Heel strak!

@T2Generation 5 жыл бұрын

I found e36 318is engine Can I install it on e30 as it is ? Or Should I change the upper and lower oil pan to the M42 e30 ?

@osmanasik 6 жыл бұрын

Tu es de ou en Belgique?

@Madge104 7 жыл бұрын

hoeveel eeft da u ongeveer gekost?

@sun-cream 8 жыл бұрын

Hello. This was perfect rebuilt. May I ask a question? Is it legal to change the engine (swap) in Belgium? Because I have an E30 1988 1.6 but it has carb engine. So, I wanted to change it but my country's rules don't allow it. I just wanted to know this.

@muisphil 8 жыл бұрын

As you mentioned, officially not..

@aboutkab 7 жыл бұрын

Hey Pvm, do you still have this car ? I have a white one sitting in the garage. I want to put a Z3 rack in it. Already done a DBilas intake collector upgrade + ship, short shifter, 540i brake system with braided lines. Would love to meet you guys some day I am from Mechelen.

@muisphil 6 жыл бұрын

Yes, still mine! Meeting can be arranged.

@blueocean8446 7 жыл бұрын

hi what kind of piston did you changed due to oversized engine block? did you also changed the cylinder head parts with aftermarkets product or the original?

@muisphil 7 жыл бұрын

Hi Denis, The pistions are OEM BMW +0,25mm oversize (KS). nl.bmwfans.info/parts-catalog/E30-2-doors/Europe/318is-M42/L-M/sep1989/browse/engine/crankshaft_pistons/ Part nr.: 11251721448 The cilinder head is bought second hand, all new OEM parts (camshaft, gears, valves..)

@ahrred3127 4 жыл бұрын

The description said the engine is bored? What is the displacement now? 1.9?

@muisphil 4 жыл бұрын

+0.25mm oversize pistons. Stock = 1.796cc Mine = 1.806cc +0.6% so negligible..

@alexanderschneppe7174 7 жыл бұрын

Hi, this is what I would like to do with my M42 Brilliantrot. How much did this revision cost? Best regards

@muisphil 7 жыл бұрын

It really depends on what you want to replace exactly and how much you can do yourself..

@sumthinsumthinfamily 8 жыл бұрын

what is that process that you did to restore the head, all the bolts, etc. like that?

@muisphil 8 жыл бұрын

+Paul Kaminskiy The head is a new one, the bolds are electrolytic galvanised and the engine block is repainted.

@LVKsj 5 жыл бұрын

Is there a specific link or book for the procedure of the m42 rebuild ?

@laurenthart9132 4 жыл бұрын

Internet

@jinxproduction2867 Жыл бұрын

Where you buy all replacement parts from

@muisphil 6 ай бұрын

BMW dealer, ebay.de, webshops, ...

@ChaZingSlaYeRz 5 жыл бұрын

Hebt u deze nog altijd in bezit?

@muisphil 4 жыл бұрын

yezz!

@geusswhatChickenbutt 7 жыл бұрын

Were did u get all the manuals? (at 5:50)

@muisphil 7 жыл бұрын

www.bmwtechinfo.com/repair/main/561en/index.htm bmwfans.info/parts-catalog/E30-2-doors/Europe/318is-M42/L-M/sep1989/browse

@Poanoofd 5 жыл бұрын

zeer mooi werk !!! zelf ook eentje aan het doen nu ! nog steeds op de baan met deze? mvg, niels

@muisphil 5 жыл бұрын

Bedankt! Jawel, nog steeds in mijn bezit en komt (enkel met mooi weer) ook nog op de baan. Ondertussen nog tal van dingen aan gedaan. Is er ergens info te vinden over jouw revisie?

@Poanoofd 5 жыл бұрын

zeer goed te begrijpen ! netjes ! Zoals? Ja, m'n maat, de eigenaar houd alles in een mapje bij en zal waarschijnlijk ook wel iets monteren als hij af is. ik denk dat je hem kent, rocky. Rijd ook al maar nog wat prullen ...

@ludovicvankerckhove3613 7 жыл бұрын

Dear, can you please tell me in which garage the cleaning process has been done? I know Arsa (1440 Wauthier Braine) but it seems to be somewhere else. Thanks in advance. ++

@muisphil 7 жыл бұрын

Ludovic VK The cleaning process off the Alu parts?

@ludovicvankerckhove3613 7 жыл бұрын

Geachte, (want heb gehoord in de video dat je nl talig was :-)) Awel waar alle motor onderdelen in een soort water hooge stroom reiniger tafel gewassen zijn daar. 2.28 in de video :-). Alvast bedankt. Mvg.

@muisphil 7 жыл бұрын

www.vaporblasting.be/home/ Dat heb ik hier laten doen.

@ludovicvankerckhove3613 7 жыл бұрын

Thx man. als je wilt ooit alles reviseren (dikker pistons of zo in zetten dan mag je bij Arsa gaan te wauthier braine) en voor de camshaft daarvoor mag je bij recam gaan. fijne week en mooie project by the way. ++

@AwkwardSilenceNation 8 жыл бұрын

Hey, ik rij zelf ook met een 318is en ben aan het overwegen om een rebuild van een motor te doen? Als je het niet erg vindt, zou je mij wat info kunnen geven over kostprijs, waar je het werk hebt laten uitvoeren, etc? Zou me heel erg helpen want er is bitter weinig te vinden op fora over het herbouwen van deze motor :-)

@muisphil 8 жыл бұрын

Quasi alles is terug te vinden op het net, zeker in de USA. Meeste werk heb ik zelf gedaan, motorbklok laten heropbouwen en wat andere kleinere klusjes heb ik her en der laten uitvoeren (injectoren reinigen, straalwerk, elektrolytisch verzinken van de kleindelen..) Kostprijs hangt er net vanaf wat je allemaal wilt doen.

@leenevin8451 7 жыл бұрын

why not put a 2.5 l6 in if you're gonna go to all that trouble?

@muisphil 7 жыл бұрын

Why put a M20B25 in an original E30 318is, is the question!

@leenevin8451 7 жыл бұрын

because the 1.8 is slow and not even economical

@muisphil 7 жыл бұрын

If you want a fast car, you don't buy a standard E30. I searched 9 months for my IS and had to had one because I am charmed by the model. 6 In line's are for the 5- and 7-series imo, E30 M3 was an 4cil. as well though (.. the never ending discussion..). And in the days the 318is was my daily car, I had an average consumption of less then 8L/100km so it is quite economical for a petrol engine from 1989. The E30 with the most modern engine and maybe even the lowest consumption of all E30's!

@seventeenroses 6 жыл бұрын

Speed is just one factor in performance. The M42 is lighter, which translates to a more even weight distribution, which in turn increases handling. If I'm not mistaken, it's the most technologically advanced engine that was put into the E30 chassis.

@per19963 3 жыл бұрын

I have a e30 318is and I smoke stock m20b25’s. M42 in e30 is a very nice combination. The only thing bad is the sound

@ams1451 7 жыл бұрын

hi i am about to purchase me a 325i i know absolutely nothing about cars but I fell inlove with the 325i i would like your help in building up my dream car PLEASE

@muisphil 7 жыл бұрын

So bring the car over here after purchasing. :)

@ams1451 7 жыл бұрын

I'm all the from South Africa :'(