Doesn't anyone 😆👍

That's exactly what mine was doing, hope everything is OK now

That's the problem,it'll be sorted with the new part,just lie on your back with a 10mm,or 8mm cant remember unplug the wire going to it first ,it's a fiddly job but undo both bolts slide the switch back away from the gearbox look at the shape of the rod coming out and and ease the new switchback on its sounds harder than it is and takes 5minutes to do,I remember it showed me the wrong gear on my dash I went through all the gears turned it off back on left it a minute to sort out what it does and everything was spot on .Good luck and don't worry all the best CRAIG

@@madchaders1 Thanks Craig much appreciated., Tim

Fitted part and you are right fault fixed! Thank you.

Oh great that thanks John, I didn't have a problem after that and if you lie down on your back it's easier to get to the switch best of luck mate 👍😊

Have you had any luck with fitting the new part? 🤞😊

@@madchaders1 Thanks for the reply,,in one word,,a big NO,,, I took of all the fairing off ,but I still could not get my hand in near it,,, I think the swing arm on the RT is quite abit bigger (chunkyer)then the GS,,, I counted over 30 small screws holding the fairing on ( and of course lost one) So I have to get some garage to fix,,, I,m now of a mind to get a new part ,as I cannot imagine having todo this on tour....The bike has been laid up for a year and I was just returning from its MOT when the problems started...My old girl is an 05,,and this issue has got me thinking whether it maybe time too get shot....regards

sorry cant remember that far back but bought it from ebay for £35.00 i think there was only two different ones and i just got the one for that year, try a bmw specialist store online like motobins.co.uk they will definetly sort the right bit. Hope this helps you out.

It's just not worth trying to mend if I can remember it's a circuit board thing that moves around, easier to buy new and ten minutes to fix

Hi mate it was no torx bolts on mine just normal bolts 10mm spanner put it on center stand and lay on your back quite easy from underneath

To many...

highdownmartin Yes it did mate and no problems after,definitely replace the switch takes ten minutes

craig dilworth cheers Craig. Had an ignition unit fail on a 800 gs. Couldn't turn it off! Had to leave it with the lights on, took the pilot bulb out but the led back light drained the battery during the day so finished work and had a useless bike. That was a crappy little microswitch

highdownmartin my front brake micro switch was dodgy as well bought a new one because the brake light keep coming on and draining the battery and it wasn't that it was the two wires coming off it towards a steering column had snapped and I had to solder them which fixed the problem.

craig dilworth worth remembering. Wires are too thin, I was shocked when I changed a heated grip and found the wires and connector more suitable for a battery connection on a sixties portable tranny. These are2A load! Micky mouse in my opinion, but I like old school electrics, feed, switch bulb earth. No bloody canbus bollocks Safe riding. M

highdownmartin yes keep safe mate