Hello Tony thank you for watching my video

Thank you for watching my video

Hello my friend thank you for watching my videos

You're welcome! I'm here to help. It's great to hear your appreciation. May your moped bring you safe and enjoyable rides. Blessings to you and your family as well. If you have any more questions or need further assistance, feel free to ask.

Hello Ronald thank you for watching my video

Hello my friend thank you for watching my video

He mentions upgrading the carb, after he talks about the air filter. Its number 3.

Thank you for watching my video

Hello David I think you can combine an oil cooler with one of those oil fill tube vent kits you just need to make the connection and at the end you need to make sure you have a oil pressure not sure what is the project but Yes

Hello the parts in this video are for scooter with gy6 150 cc but many scooters works the same way so if you buy parts for your scooter search on line performance parts for SYM vs 150 to make sure they work great for you . Thank you for watching my vide and ride safe

Hello Jane I find the solution for you. you will need to make a small hole in the nibbi pipe or on the top of the hight flow filter and place a Brass Hose Fitting, Adapter like this 1/4" Barb x 1/8" NPT Male Pipe like this amzn.to/3fcPRMU so you can connect your hose there

Hello Robert the first thing that came to my mind is a dirty air filter try to disconnect the house in the back side of the carburetor and go for a test ride for 1/2 mile and see if you have a change in performance but if you change the stator could be that the new stator at high RPM is not performing the same way like the old stator . I hope this can help you

Hello my friend if you are at sea level you can place a 120 or 125 main get the higher altitude the smaller jet you will need. Thank you for watching my video

Hello George try this amzn.to/2QZ8lZy look like they have a lot Thank you for watching my video and be safe

Thanks, are you located in Florida?

Hello better do not plug the hoses because you can build to much pressure in the motor for sure one hose coms from the head valve cover and you can place a small filter at the end and the second should be from the recirculating exhaust fumes and that can go to open air and the last one should be the large hose for the filter

Thank you for the quick response and the great videos I bought everything you said in your video now just waiting to put it all in

Hello my friend great idea and thank you for watching my video

Hello Yes this parts will be great just make sure your motor say 157qmj

Hello my friend thank you for watching my video

Hello my friend no I did not made that video yet . but do you have nitros can sunspension ? Thank you for watching my video

Hello you will need to test choke kzfaq.info/get/bejne/ndB2f71_1r6dZ3U.html

Hello Ryan change your mail jet 1 or 2 size bigger change your weight rollers at the variator 2 step lighter and you will start to feel more speed . Thank you for watching my video

Hello Paul I will check the roller weight in the back side of the variator to see if they are worn and if you need to replace them after that if the weights look good I will adjust the valve clearance. I hope this can help you and thank you for watching my video

Hello my friend you will get more or less an extra 12 to 15 extra miles by doing all this things . Thank you for watching my video

Hello my friend check this partskit.com and thank you for watching my video

3000 k will be better 👍

The best way to make a 50cc go faster is to place a big boar kit but keep in mind that if you change that your scooter will only last one more year

Hello George I just update the link amzn.to/3oawhVM I had this Performance Racing Exhaust Muffler Pipe on my scooter and it works good but because is a free flow is a little more makes a little more noise but you can always buy a silencer but at that point you will lose a little more performance

@@VirberelloScooterTips awesome my friend thank you so much, I have a question, is the muffler aluminum, does it weigh a lot? On my current scooter TaoTao Quantum Tour 150cc I have an small aluminum exhaust, I don’t believe it will help me with performance..

@@georgeecheverri5452 Yes I think that is aluminum and is lighter then the original exhaust the only thing I had to slightly bend the Front Header Muffler Exhaust Pipe because was not matching perfectly so if you feel little resistance or if you see that the lower bolts are not matching do not forced in so remove the exhaust and slightly bend the front but after that no problem was a little loud but lots of fun

@@VirberelloScooterTips thank you my friend,I appreciate all your advice, I purchased everything that you recommended hopefully I should see an improvement, I’ll keep you posted.

Hope everything is going well with you I do have two questions for you, regarding the spark plug iridium, unable to fine spark plug i’ve checked discount auto and AutoZone with no success, do you know of a place where I could go to purchase one? I don’t trust items online due to counterfeit. Second question, on the video the rollers that you show is of 12 g and in the link in Amazon they’re 14 g Will this be an issue?

Hello Daniel I buy everything on Amazon

Hello my friend yes you give more air to your motor now the motor want more juice 120 will perfect are sea level . Thank you for watching my video

@@VirberelloScooterTips so I changed the main jet to a 120 and it now bogs out when Im at full throttle and when I go above 40.

Try 115

If your scooter's timing is 180 degrees out, it means that the ignition timing is off by half a revolution, which can cause the engine to run poorly or not at all. Here are the steps you can follow to correct the timing: Remove the spark plug from the engine to make it easier to turn the crankshaft. Locate the timing marks on the engine's flywheel and the engine casing. The timing marks are usually indicated by a line or notch on each component that needs to be aligned for correct timing. Rotate the engine's flywheel in the direction of normal rotation until the timing marks are aligned as indicated in the manufacturer's service manual for your scooter's model. Check the position of the camshaft and the crankshaft to ensure that they are aligned properly. They should be in the correct position as specified in the service manual. Reinstall the spark plug and try starting the engine. If you have correctly set the timing, the engine should start and run smoothly. If the engine still runs poorly or does not start at all, it is possible that there may be other issues that need to be addressed, such as a problem with the carburetor, spark plug, or other components. In that case, it may be best to have a qualified mechanic diagnose and repair the issue.

Hello my friend I think #105 main jet should be great . Thank you for watching my video

@@VirberelloScooterTips Many thanks

I don't even need hair spray or gel in the morning ah ah ah

Hello no I do not have a shop one day I will open one that could be a good idea

Open that bike shop brother

Hello yes feel free to visit my channel where you can find lots of video on how to enhance a 150cc

Hello my friend change the variator roller weight to 16 grams amzn.to/47eawt1 you will lose a little torque but you will gain more top speed

@@VirberelloScooterTips thanks buddy I love ur channel by the way great tips and thanks for ur time teaching us

I am the same weight 15grams worked best for me lighter ones had bad acceleration

@@vinnyrider88 Now if you shared your scooter with say a 120 pound person how would 15 gram rollers effect their ride? Better or worse? I weigh 260 of that makes any difference?

Hello Clifford I like 10 gram roller but sometime I feel little to much vibrations so I change to 12 grams and I like them a little better and my weight is 245, Thank you for watching my video

@@DavidKing-wk1ws I am not sure but I think the more you weigh even with a passenger the heavy roller weights are better for acceleration and top speed. I tried 12g and they definatley made it slower take of speed with higher rpms so when people say lighter weights are better I disagree

Best advice David is to get a performance air filter and exhaust they will add the most hp and acceleration will be way more noticeable.

Hello Boma I like the younger and Younger look ah ah ah in realty my son toll me to do his diet and I lost 45 pounds in 3 months and I feel lighter and healthier at the moment . Thank you for watching my video and be safe

virberello GY6 Scooter Tips I love the energy brother, Love the videos and great job to your son ! I’m gonna keep watching your videos so I can know Howwwwwwwwww ! Have a great day hermano

Now I need more info on the diet.....

@@charlestaylor3544 is an App on the phone called my fitness pal is free do not need to pay for upgrade just track your food and count your calories and stay lower then 2100 calories per day taking in consideration how toll you are and how old you are you need to calculate that on calorie calculator on line

Thank you. Your scooter videos are very helpful also!

Hello James thank you for watching my video

Hello Clash change the roller weight to 12 g upjet the carburator main jet to #118 if you are at sea level and thats all . thank you for watching my video

Hello my friend thank you for watching my video

@@VirberelloScooterTips you are a ropot why you every time you say to me that words 😡 try something different ☺️☺️

Most of what he said in the video seems like it would apply. However if i had to guess about the carb jetting ... A 50cc is 1/3 a 150cc so instead of a 120 wouldnt it be a 40 for a 50cc engine?

David King I mean that makes sense but I recently had my carb apart on my 50cc and it had an 85 main jet it I think

Yea I have 50cc Honda Today (AF61E) has #80 mainjet

No buy a bigger one

@@joeybomba8856 that was ages ago lmao I got a geared 125 now

Great Idea thank you for watching my video

Hello Karim thank you for watching my video

@@VirberelloScooterTips thank you for sharing

great idea

The prices of the part of gy6 are very affordable but I agree with you Honda and Yamaha are great quality scooters

Hello Pecky Arvizu you right ah ah ah but some people can not afford an expensive motorcycle so they buy what they can afford and I'm here to help them .Thank you for watching my video

The most effective method to increase the speed of a 50cc scooter is to install a big bore kit, but it's important to note that doing so may reduce the scooter's lifespan by approximately one year.