BOSCH GDX 18V-200 C Review / Impact Driver

Рет қаралды 162,235

3 жыл бұрын

Unboxing and review of the Impact Driver Bosch BOSCH GDX 18V-200 C with 8Ah ProCORE battery.
The Bosch GDX 18V-200 C is an Impact Driver and Impact Wrench in one tool, ready for all applications thanks to the 2 in 1 bit holder. It comes equipped with a 1/4 inch hexagon bit holder for screw driving and drilling and a 1/2 Inch square tool holder for bolting. Its high torque, high impact rate and fast rotation speed, due to the Brushless Motor, ensures that the job is done quickly and efficiently. It is powerful in use, even in hard to reach areas thanks to best head length to torque ratio (147mm / 200Nm). This model features Simply Connected, the intelligent inventory management Bluetooth system from Bosch that allows you to personalise your tool settings via the Bosch Toolbox app.
Other BOSCH Professional Reviews:
· ANGLE GRINDER - Bosch GWX 9-115 S: • Bosch GWX 9-115 S Prof...
· 6 in 1 CORDLESS DRILL- Bosch GSR 18V-60 FC: • Bosch GSR 18V-60 FC Pr... and • Bosch GSR 18V-60 FC Pr...
· CORDLESS ROTARY HAMMER DRILL - Bosch GBH 18V-26 F • BOSCH GBH 18V-26 F Rev...
My main KZfaq channel: / woodworkingbarcelona
Support me on patreon: / wwb
Follow me on my social media:
/ woodworkingbarcelona
/ woodworkingbarcelona
Unboxing and review of the Impact Driver Bosch BOSCH GDX 18V-200 C with 8Ah ProCORE battery.
The Bosch GDX 18V-200 C is an Impact Driver and Impact Wrench in one tool, ready for all applications thanks to the 2 in 1 bit holder. It comes equipped with a 1/4 inch hexagon bit holder for screw driving and drilling and a 1/2 Inch square tool holder for bolting. Its high torque, high impact rate and fast rotation speed, due to the Brushless Motor, ensures that the job is done quickly and efficiently. It is powerful in use, even in hard to reach areas thanks to best head length to torque ratio (147mm / 200Nm). This model features Simply Connected, the intelligent inventory management Bluetooth system from Bosch that allows you to personalise your tool settings via the Bosch Toolbox app.
Other BOSCH Professional Reviews:
· ANGLE GRINDER - Bosch GWX 9-115 S: • Bosch GWX 9-115 S Prof...
· 6 in 1 CORDLESS DRILL- Bosch GSR 18V-60 FC: • Bosch GSR 18V-60 FC Pr... and • Bosch GSR 18V-60 FC Pr...
· CORDLESS ROTARY HAMMER DRILL - Bosch GBH 18V-26 F • BOSCH GBH 18V-26 F Rev...
My main KZfaq channel: / woodworkingbarcelona
Support me on patreon: / wwb
Follow me on my social media:
/ woodworkingbarcelona
/ woodworkingbarcelona

Пікірлер: 66

@sureshbabu-zf8ew 11 ай бұрын

Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

@tipsonchips 2 жыл бұрын

Now thats how you do a review! No bullshit. 👍🏼

@DutchDiederik Жыл бұрын

Impressive. I love these impact drivers. I bought into the Makita ecosystem but Bosch makes quality gear, too. Very happy with my multitool from them.

@avelinileva 2 жыл бұрын

Great tool great presentation! Thank you!

@mimiteas 3 жыл бұрын

Great tool and great demonstration! Thanks!

@woodworkingbarcelonaii9413 3 жыл бұрын

Thanks Mimi! 😉

@Pillados- 3 жыл бұрын

Excelente presentación del video y las leyendas, saludos

@woodworkingbarcelonaii9413 3 жыл бұрын

Muchas gracias!

@sygad1 Жыл бұрын

no messing around there, you gave it some stick, thanks for showing what I need to know before buying

@venugopalpillai4393 2 жыл бұрын

Super 👍

@anilabbaraju1 Жыл бұрын

Hi nice review can we use deep socket with this

@jorgerurouni3631 4 ай бұрын

Una demostración real. Eso si que importa

@l75rd83 3 жыл бұрын

I have a Dewalt dcf887 impact driver. This looks very good compared to

@alpendz8105 2 жыл бұрын

Is it still powerful with non pro core batteries?

@irkutyanin38 3 жыл бұрын

Хороший аппарат

@hectorsoriano5921 3 жыл бұрын

Very good,excelente.ok

@thlunlhouvum7908 Жыл бұрын

Price please

@wuillysantana1713 3 жыл бұрын

En que tiendas se puede conseguir en USA o en México?

@jaybeesavares180 3 жыл бұрын

Can this be use fo cement?

@wuillysantana1713 3 жыл бұрын

Buen video mi hermano, Excelente, que modelo es me gustaría que me lo hiciera saber gracias bro....!

@jorge555ayala8 3 жыл бұрын

En el video lee abajo hay lo dice ..

@MZMA85 3 жыл бұрын

I just want to ask if your bosch hex impact adapter also wobbles like mine...

@taylorwyant5503 3 жыл бұрын

Same

@TheUnlocking Жыл бұрын

That's a cool video; action only and no yap-yapping. But I wish you could have briefly explained the variations in speed that you demonstrated.

@Luke-yx5ve Жыл бұрын

Depending on what you're doing the impact is good / bad I have it as a cabinet maker and instead I use a 12v impact all the time because this is way too quick / powerful for most delicate things , it'll undo wheel bolts on my car nice and easy (about 115nm) but trying to delicately make a cabinet it's awful , I'd go with a cheap DeWalt if you want good 18v that'll take the abuse and 12v Bosch

@antondobrev8079 Жыл бұрын

can someone test CP CP8548 vs Bosch or any other professional brand ?

@gianlucacapretti4630 2 жыл бұрын

Ciao, volevo sapere se il battente è fisso o si può eliminare....quando avvito viti grosse preferisco senza, anche perché ci foro avanti o altrimenti anche un po' di grasso...

@azboxer09 3 жыл бұрын

Hola muy bueno tú vídeo, crees que es el destornillador de impacto del momento, a Chile todavía no llega solo ha llegado el gdxli que opino que es inferior y no es heavy duty... Espero que llegue pronto, lo podrías comparar con otro modelo de otra marca?? Saludos cordiales...

@juanpauloriquelme3702 Жыл бұрын

Viejito lo compre en Dinamarca y es muy bueno! Aguanta el agua lo que es ideal para trabajar en el sur de chile donde trabajamos! Saludos!

@jaybeesavares180 3 жыл бұрын

can we also use this for buffing or polisher

@woodworkingbarcelonaii9413 3 жыл бұрын

I don't think so.

@robertcasey3528 3 жыл бұрын

I use mine to make my lunch.

@jesus2186 3 жыл бұрын

what differences does it have with the gdx 1800???

@matthewrobinson6388 3 жыл бұрын

Same tool just -1800 is inch lbs and -200 is Nm

@themittal Жыл бұрын

Hi complete noob here. How do you use normal driving bits with this ?

@DutchDiederik Жыл бұрын

Impact drivers use a quick-release connection for their bits. If your bits don’t have that (the small ones), use a magnetic bit holder with a quick-release connection. They’re only a few bucks. If you’re planning on doing heavy duty work, it’s worth it to get special impact driver bits, as impact drivers are way stronger than drill/screwdrivers and can destroy “normal” bits.

@erolaslan6185 3 жыл бұрын

Ucu takıyorum düşüyor tutmuyor nasıl ysparız

@jasonoliverio2062 2 жыл бұрын

can we use 18V battery for that?

@dustinhiggins6358 2 жыл бұрын

Yes, the model is 18v so you should use 18v battery

@davidniko7973 2 жыл бұрын

What does that wireless part do? Can any 1 explain

@jaybeesavares180 3 жыл бұрын

Can this be use for metal as well?

@bluemantom77 2 жыл бұрын

Yes if you have the right bit

@TheBootyWrangler 2 жыл бұрын

Check out torque test channel’s video on these. The 1 and 1.5 are weak sauce.

@jaybeesavares180 3 жыл бұрын

can this be used for wheel of the car

@LKN4WAR 3 жыл бұрын

You need impact wrench. Not this. This is impact hex driver. Most car lug nuts are too tight for hex drivers.

@woodworkingbarcelonaii9413 3 жыл бұрын

Yes you can if you have a small car

@woodworkingbarcelonaii9413 3 жыл бұрын

Of course an impact wrench will deliver more torq (Nm) but in my experience you can mount/unmount small car wheels with this range of product.

@enriquezueco5462 3 жыл бұрын

It has got 200Nm torque, you can use it whit screews, bolts and nuts.

@19kreeper 3 жыл бұрын

@@LKN4WAR "This is impact hex driver." , Wrong!!! You will use the 1/2 square for car, this is why this tool have it, not adaptor from hex. And yes maybe is at limit with the power for cars, you still can use it if was tightened correctly.

@andrestorres1202 3 жыл бұрын

Cuanto cuesta?

@woodworkingbarcelonaii9413 3 жыл бұрын

Me costó 137€ de oferta, con L-BOXX sin la batería. Un saludo!

@enriquezueco5462 3 жыл бұрын

@@woodworkingbarcelonaii9413 Vimos la misma oferta amigo😂👍👍Ya le he dado caña y es una pasada, 2x1 llave de impacto y atornillador, con esas 3 velocidades podemos poner todo tipo de tornillos, incluso tirafondos mas pequeños que los primeros que pones.

@woodworkingbarcelonaii9413 3 жыл бұрын

@@enriquezueco5462 Exacto! Un placer trabajar con esta herramienta.

@strykerdelacroixalabastera2227 2 жыл бұрын

YES EASY PEACY