How to set EQ and Noise suppressor with Boss VE-8 through the advanced settings of the VE-8 Another question from Mj312 EQUIPMENT I USE AND RECOMMEND www.amazon.com/shop/daerney (amazon assoc link) #DebErney #bossve8 #ve8 #boss
Пікірлер: 35
@clydeletreta6325 Жыл бұрын
Thanks Deb, I usually watch this tutorial every year just to keep my ve8 top shape and my knowledge of this unit up to par.
@polarbear4728 Жыл бұрын
Deb! You're a lifesaver🌻 I somehow lost my manual and desperately needed to reset my e.q. When I Googled reset my ve8 e.q. this vid popped up first. And you made it so easy. Thank goodness👍
@TheSingingDoctor325 Жыл бұрын
Thank you for doing this video.
@MrNickKorshunov2 жыл бұрын
Great tutorial, very clear and useful. Thanx a lot!
@brianscottmatthews4437Ай бұрын
Thank you Deb ❤
@aarongabbard2 жыл бұрын
Deb...I have to say...I absolutely love you...You are the only person who has went so in debth!!
@DebErney2 жыл бұрын
I love to hear that people are finding my videos helpful. I know when I first started using a P.A. System it was such a mystery and everything was a learning experience. I had hoped to help other musicians along the way. I always learn something new with each video.
@michaelkelly65833 жыл бұрын
Deb, you’re the best! Thank you for this tutorial.
@DebErney3 жыл бұрын
Who doesn’t love to hear that? 🙏
@kevinsturges69572 жыл бұрын
This is really useful. Thank you.
@Mj-bg2uj3 жыл бұрын
Thanks again Deb , I had no idea that I should be adjusting all of them .. I bought a new microphone and the guy told me to increase the gain in the boss ve-8 bc dynamic mics respond better to high gain so I’ve been trying to just adjust the high .. I love to play but I’ve never played plugged in before so it’s like learning a whole new language.. thanks again, your a big help !
@DebErney3 жыл бұрын
You know I never adjusted any of these settings. just figured it out for the video. I always use the mixer for EQ and the effects from Boss ve-8. Try everything out and see what you prefer. just because someone said something only means that it worked for them. May not work for you.
@Mj-bg2uj3 жыл бұрын
Deb Erney yeah I’ve been just trying to figure it out but it’s really hard to hear yourself and to hear the differences.. thanks again for taking the time to make these awesome videos and tutorials.
@dorak8 Жыл бұрын
Thank you! Very helpefull! :)
3 жыл бұрын
Very precious you tips 🥰🥰 hugs from🇧🇷
@DebErney3 жыл бұрын
Thank you Emanuel. Hugs back to you from the U.S.
@Kuziela8 ай бұрын
Thank you very much :)
@jeromed4d10 ай бұрын
Thanks this helped alot
@timothymarkprice9907 Жыл бұрын
Deb- Thanks for the vids! When running out of my XLR out I'm getting a loud hiss. I'm using this for radio appearances so it needs to be super quiet. The line out is much quieter, but I'm pretty sure that there's something in the settings to alter this as its practically unusable. Thanks Again! Tim
@DebErney Жыл бұрын
Make sure you’re using a trs, stereo 1/4” cable. It will have two black markings across connector.
@thugwarsusa52506 ай бұрын
Well if you're using powered PA speakers you can mix your voice straight from this Bluetooth your music powered speakers for my purpose I believe I'm just using it for vocal practice with backing tracks do you agree with that I think I'm correct I'm not sure
@DebErney6 ай бұрын
No Bluetooth on boss ve8
@blissisnow2 жыл бұрын
Love your tutorials on the boss ve-8. In this video you didn’t address knobs 4, 5, & 6 in the EQq
@DebErney2 жыл бұрын
Went and looked on the manual. I couldn’t get those adjustments to work the way the manual describes.
@blissisnow2 жыл бұрын
@@DebErney Mid Q (button 5) is a range of mid frequencies from very narrow (.5) to very wide (16). Once the range is chosen, those frequencies are pulled up and down by the mid gain (button 3). Mid Freq (button 4) is a single, narrow frequency range to be pulled high or low. Usually used to pull out a troubling frequency.
@Mj-bg2uj3 жыл бұрын
My confusion is that say I adjust high gain ( reverb knob) to 75 ... when I exit out now my reverb number is at 75 ... so if I turn it down to 50 if I go back into the EQ settings now the high gain is set at 50... Unless I’m completely wrong I figured the numbers for the gain would be seperate for the numbers on the reverb .. unless .. when I go back to check the level of gain in the EQ settings it’s just showing whatever level I had the reverb knob set for .. lol
@jamieloftis64653 жыл бұрын
Deb, thanks for all your wonderful tutorials. I used a recent one to set up an external foot switch, thank you. My main use is vocal harmony. I find when I trigger say the "high" harmony on and then off, the unit returns to "double" harmony setting. How do I adjust this to remove the "double" effect and have zero effect when I switch the "higher" setting from on back to off? Thank you, Deb.
@DebErney3 жыл бұрын
Another great question to look into.
@DebErney3 жыл бұрын
I’ll have to try mine and I’ll let you know what happens.
@salyersjessica4 ай бұрын
I came to ask the same thing... is there a way to avoid the knobs resetting after changing the eq? I turned on the knob lock and then changed eq but as soon as I turned off knob lock, everything changed. @debrney @@jamieloftis6465
@salyersjessica4 ай бұрын
I came to ask the same thing... is there a way to avoid the knobs resetting after changing the eq? I turned on the knob lock and then changed eq but as soon as I turned off knob lock, everything changed. @jamieloftis6465 @@DebErney
@ELIAHOficial4 ай бұрын
Does this have any of them for vocals?
@DebErney4 ай бұрын
The ve-8 is a vocal processor. Effects are for vocal.