Box Offsets, 4 Pt. Saddle Bends, 90° Stubs and Adding to Parallel Bends

Рет қаралды 19,371

3 жыл бұрын

Klein Tools 51604 Iron Conduit Bender, 3/4-Inch EMT or 1/2-IMC Rigid Bender, Features Klein Tools Angle Setter (Cat. No. 51612) : Amazon: amzn.to/3wJHVuQ
Klein Tools 51603 Iron Conduit Bender, 1/2-Inch EMT Bender, Features Klein Tools Angle Setter (Cat. No. 51611): Amazon: amzn.to/3uvPhQC
Iron Conduit Bender Head, for 3/4-Inch EMT or 1/2-Inch Rigid IMC, use with Klein Tools Angle Setter (Cat. No. 51612) Klein Tools 51609: Amazon: amzn.to/3uDqvOn
Iron Conduit Bender Head, for 1/2-Inch EMT, Compatible with Klein Tools Angle Setter (Cat. No. 51611) Klein Tools 51608: Amazon: amzn.to/3d5EJBW
Aluminum Conduit Bender 1/2-Inch EMT, Wide Foot Pedal, Benchmark Symbols and Angle Setter Technology Klein Tools 51606: Amazon: amzn.to/3d7CdLw
Conduit Bender 1-Inch EMT with Angle Setter Technology, Wide Foot Pedal and Benchmark Symbols Klein Tools 51605: Amazon: amzn.to/3fZp2xK
Iron Conduit Bender Head, for 1-Inch EMT or 3/4-Inch Rigid IMC, use with Klein Tools Angle Setter (Cat. No. 51613) Klein Tools 51610: Amazon: amzn.to/3uF7fQQ
Aluminum Conduit Bender 3/4-Inch EMT, Wide Foot Pedal, Benchmark Symbols and Angle Setter Technology Klein Tools 51607: Amazon: amzn.to/3t76jUV
Klein Tools 51612 Conduit Bender 3/4-Inch Angle Setter, for use with Klein Tools Conduit Benders (Cat No. 51607): Amazon: amzn.to/3s5o4CO: Amazon: Klein Tools 51611 Conduit Bender 1/2-Inch Angle Setter, for use with Klein Tools Conduit Benders (Cat No. 51606)
Klein Tools 51613 Conduit Bender 1-Inch Angle Setter, for use with Klein Tools Conduit Bender (Cat. No. 51605): Amazon: amzn.to/3fV2C0R
Ideal 35-083 Twist-A-Nut Conduit Deburring Tool for 1/2", 3/4" and 1" Conduit: Amazon: amzn.to/3vpQh9y
Milwaukee M12 FUEL™ Compact Band Saw Kit 2529-21XC: Acme Tools: imp.i284638.net/P0j7yN
Milwaukee M12 FUEL™ Compact Band Saw Bare Tool: Acme Tools: imp.i284638.net/rn4gBv
30-9/16 In. 12/14 TPI Compact Extreme Thin Metal Band Saw Blade 3Pk: Acme Tools: imp.i284638.net/e4vYKD
MILWAUKEE M18 FUEL™ Compact Band Saw Kit: Acme Tools: imp.i284638.net/kjgRNd
MILWAUKEE M18 FUEL™ Compact Band Saw (Bare Tool): Acme Tools: imp.i284638.net/rn4gBv
Milwaukee Compact Band Saw Reamer Attachment 49-90-2029: Acme Tools: imp.i284638.net/mgRn01
Klein Tools K12065CR Wire Cutter and Crimper Tool for Wire Cutting, Stripping, Crimping and Twisting (8-18 AWG Solid): Amazon: amzn.to/37vyyUC
KNIPEX Tools 13 72 8 Forged Wire Stripper, 8-Inch: Amazon: amzn.to/3ktrv44
Shipping, Entertainment, etc. Discounts:
Amazon Prime Student 6-month Free Trial: amzn.to/3kFkEVm
Amazon Audible Plus 30 days free! Listen to thousands of Audible Originals, audiobooks, and podcasts. amzn.to/3gF9jDC
Amazon Prime Wardrobe: Choose up to 8 items, keep only what you want, free and easy returns.: amzn.to/3jnRn2b
Amazon personal shopper, just $4.99 per styling: amzn.to/2UXVOaG
Amazon Business Account: Create a free account for your business with benefits.: amzn.to/3sUWzO9
Prime is just $5.99/month for qualifying government assistance recipients: amzn.to/3BojoNq
Kindle Unlimited 30 day free trial for both reading and listening: amzn.to/3DrVHFC
Amazon Prime 30-Day Free Trial: amzn.to/3BojS6c
Give Amazon Prime as a gift: amzn.to/3DDKX7k
Create an Amazon Wedding Registry: amzn.to/3mJMfaE
Audible Gift Memberships: amzn.to/3BmTiKr
Audible Premium Plus 30 day free trial and Get Up to Two Free Audiobooks, listen to professionally-narrated audiobooks: amzn.to/2Wt4fvt
Amazon Prime Music: Get unlimited access to 75 million songs: amzn.to/2WE7rEg
Amazon Prime 30 day free trial: amzn.to/3BDP3KT
Create an Amazon Baby Registry: amzn.to/3kLKFT7
My Gear and Software:
The video was taken with the: PANASONIC LUMIX GH5 Body 4K Mirrorless Camera, 20.3 Megapixels, Dual I.S. 2.0, 4K 422 10-bit, Full Size HDMI Out, 3 Inch Touch LCD, DC-GH5KBODY (USA Black): Amazon: amzn.to/2VvWVcV
This video was made using the Shure Multi-Purpose Condenser Microphone, Black (SM27-SC): Amazon: amzn.to/31JWOPc
This video was made using the: Transcend 64GB Class 10 SDXC Flash Memory Card (TS64GSDXC10E): amzn.to/1w02Oxn
Bill and sparkychannel.com are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Пікірлер: 75

@JohnDoe-qq8et 3 жыл бұрын

One of the best teachers for all things electrical. Super thorough and professional every time.

@SparkyChannel 3 жыл бұрын

Thanks so much!

@gmr7526 5 күн бұрын

Hey Sparky, you still got it😂 Thank you, thank you, thank you.

@RashadTyrique Жыл бұрын

Just Subscribed! I’m a 1st year apprentice, looking forward to learning a lot… Observe & Absorb is my new motto

@SparkyChannel Жыл бұрын

Thanks, and welcome to Sparky Channel!

@RashadTyrique Жыл бұрын

@@SparkyChannel thank you for your wisdom knowledge & expertise. ⚡️⚡️⚡️

@stuartvasquez6404 3 жыл бұрын

These videos are great and so helpful for learning amazing work

@SparkyChannel 3 жыл бұрын

Thanks Stuart!

@eladiopichardo 3 жыл бұрын

You are doing a great service to the tradesmen. Thank you.

@SparkyChannel 3 жыл бұрын

Our pleasure!

@rafaelr5837 2 жыл бұрын

such a pleasure watching you work and making it look so easy.

@billdotpilot 3 жыл бұрын

Bill congratulations on getting back to 100K subscribers. Great video as usual

@SparkyChannel 3 жыл бұрын

Thank you so much Bill! 😀 I hope your piloting business is getting close to going full speed ahead again! All the best!

@davidmunoz8326 3 жыл бұрын

That joke in the beginning killed me !!

@SparkyChannel 3 жыл бұрын

LOL! Thanks David!

@MrStanwyck 3 жыл бұрын

Congrats on reaching over 100,000 subscribers again!!!!!

@SparkyChannel 3 жыл бұрын

Thank you so much Bill! 😀 I'm very grateful for the support!

@ElChapitofz 2 жыл бұрын

Man that's a good explanation. Learning a lot from you. New subscriber right here!!

@SparkyChannel 2 жыл бұрын

Awesome, thank you! Welcome to Sparky Channel!

@GGGenom 3 жыл бұрын

If you put the holes of the one-hole straps above the pipe, gravity becomes your friend. With the straps below, pulling down on the pipe can bend the strap at the hinge and cause the pipe to come away from the wall.

@SparkyChannel 3 жыл бұрын

Thanks!

@charlieperez6844 2 жыл бұрын

Awesome video, thank you so much

@iandrew6347 3 жыл бұрын

Great video Sir Stay safe watching from the uk

@SparkyChannel 3 жыл бұрын

Thanks Ian, cheers from San Diego!

@ccadama 3 жыл бұрын

@Sparky Channel. Thanks Bill for another educational video. Also congratulations on reaching the 100K subscriber mark again. 200K and above is just around the corner. Hope you and your family stay safe and well.

@SparkyChannel 3 жыл бұрын

Many thanks! And thanks for watching Sparky Channel!

@michaelhinchey Жыл бұрын

Now thats what I needed.

@trevjamesc 3 жыл бұрын

Why are my bosses all assholes and this guy is super positive

@SparkyChannel 3 жыл бұрын

LOL!

@The360Electrician 3 жыл бұрын

Thanks for the video!

@SparkyChannel 3 жыл бұрын

My pleasure, thanks!

@Dat_Guy1989 Жыл бұрын

exellent instructions

@tallr264 3 жыл бұрын

Really good job for conduit. Hey sparky, can you make video how install a 3 ways sensor switch? Thank you sparky

@harrypnus5098 3 жыл бұрын

👍 best wishes from 🇨🇦

@SparkyChannel 3 жыл бұрын

Cheers from San Diego!

@theoisaac9948 3 жыл бұрын

Good stuff

@SparkyChannel 3 жыл бұрын

Thanks!

@billsbuck911 Жыл бұрын

TIL I learned there's a reamer on the Milwaukee bandsaw....

@Lolgkvsatcz 2 жыл бұрын

More videos on conecting an entire HOUSE FROM SCRATCH‼️

@mannyfresh8504 3 жыл бұрын

Not going to lie, Sparky. I've been doing installation work for years and bypassing a lot of the technical math lol. gives me a headache... but, I'm one of the best regardless. people have seen my work wanting to hire me. still, I look at your channel for ways to improve so keep it comin'

@SparkyChannel 3 жыл бұрын

Wow, that's a great compliment. Thanks!

@mannyfresh8504 3 жыл бұрын

@@SparkyChannel no problem.

@garydudgeon 3 жыл бұрын

Good kob Sparky.

@SparkyChannel 3 жыл бұрын

Thanks Gary! Have a great weekend!

@kelvincabrera4272 Ай бұрын

Amen 🙏

@elizandro8422 3 жыл бұрын

Sparky is a beast. 🤟

@SparkyChannel 3 жыл бұрын

Thanks!

@skyemac8 3 жыл бұрын

Best on KZfaq!

@SparkyChannel 3 жыл бұрын

Thanks so much!

@WillieMakeit 2 жыл бұрын

Damn that was 👍

@SparkyChannel 2 жыл бұрын

Thanks so much!

@lazarevic95 3 жыл бұрын

Nice video Bill. Quick question Did you have to account for the gain of the bender on the 90 bend and cut the conduit down for that? But also wouldn't you also need to also figure for the shrink from the four point saddle which would be a 1-1/2 inches if I'm correct since you're doing two 30 degree offsets? (1/4 inch shrink per inch of rise on a 3 inch obstruction). I'm just asking because it seems like that scenario you demonstrated on fit perfectly to a 10 foot stick after all the bends and gain from the 90 and the shrinkage from the offsets.

@GGGenom 3 жыл бұрын

The star point on the bender marks the back of a 90 degree bend so you don't have to work out the take-up. If he were bending the stub in the other direction, he would have to deduct the five inches or so from the measurement. And by measuring and marking the bend after bending the saddle, the shrink is already in the pipe and accounted for in the measurement.

@SparkyChannel 3 жыл бұрын

Hi Ethan! I made my measurement for 76" after I made the 4 pt saddle so the shrinkage was already figured in. Notice at 8:56 I'm measuring with the 4 pt saddle already made. Same with measuring for the 90 stub. The 90 was already made so it's gain was already figured in. I cut a little ( I think it was 17") off of the conduit before I started to make it easier to work with so don't go by my starting with a 10' stick. Good observations!

@lazarevic95 3 жыл бұрын

@@SparkyChannel Oh okay I must have missed that part. Thank you for the info and the video! I am an electrician also, we're always learning with this trade

@SparkyChannel 3 жыл бұрын

Great discussion guys! Everyone is learning from each other!

@Bapuji42 Жыл бұрын

Great video as always Mr. Bill. I'm confused though, you measured the needed distance for your parallel stub on center (4:20)... but in my understanding the star mark on the bender (9:00) will put that 76" measurement at the back of the bend (outside surface of the vertical leg of the pipe, not center). Why wouldn't the bend end up short by 1/2 the diameter of the pipe doing it this way?

@alexvalenti9213 Жыл бұрын

Thank you. I don't understand for the same reason

@Bapuji42 Жыл бұрын

@@alexvalenti9213 Ya, on center vs to outside of the pipe. I don't get it.

@pollo24k 2 жыл бұрын

can you please show how to do a rolling offset

@mariuszstanisz9070 2 ай бұрын

Do you have a video on Compound Bend? EG: 2 45 bends to make a 90

@TheProdigalSon_777 3 жыл бұрын

hey I'm new to your channel and i was wondering if you or any other electrical brother out there could share. what trick, method or whatever they use to know which way a box offset would go on a pipe that's got bends already in it.....example, let's say we got a pipe running up the wall [conduit] and its got a kick and a 90. what's the best way to insure my box offset is in the right direction.....i hope i explained that well.....

@SparkyChannel 3 жыл бұрын

See 10:40 of this video.

@nickb5441 2 жыл бұрын

Why did you use the star and not the arrow method which requires you to use take up? I'm new so I'm kind of confused on this part. Thanks in advance!

@ElectricianMagician 2 жыл бұрын

Just another way of doing it. Easier.

@eladiopichardo 3 жыл бұрын

Please do the same thing for 3/4"

@gavinkelso5271 3 жыл бұрын

Question about your bandsaw reamer. I have bought one, but it’s not meant to fit on the m12 bandsaws. How’d you secure your reamer to the m12 bandsaw?

@SparkyChannel 3 жыл бұрын

It fits on both the new M18 and the M12 bandsaws. It just tightens on one of the wheels. The problem is that it can work loose and fall off of the band saw while it's in use.

@ABAMSYTEL 3 жыл бұрын

Great! Is klein tool bender, a good tool? is better that Ideal bender? tks.

@SparkyChannel 3 жыл бұрын

I like the IDEAL the best but I like the new angle setter on the Klein especially for tasks like a 4 pt saddle bend. I can use either one. They are both excellent.