Рет қаралды 111,860
This is finishing up a job I am doing for a neighbor. In my last video I made a sheath for this tomahawk. He also wanted me to wrap the handle with leather. I decided to make a braided handle very similar to how whip handles are made. I used oiled leather about 4 ounce in thickness for the lace. This handle is an 8 strand diamond round braid with turks-head knots at each end.
1/2 inch leather lace is available in my Etsy shop: bransonsgeneralstore.etsy.com...
For more information on braiding, see this book (Amazon affiliate link): amzn.to/3oxGU4l
The needle I used is a Perma-lok needle: amzn.to/3q2Lfgi
I also used a lacing fid: amzn.to/39fK9XU
The tool I use to cut lace: amzn.to/35sWQxc
Useful leather work tools and supplies (Amazon affiliate links)
Hand stitching needles I use: amzn.to/39ivStf
A nice set of pricking irons for punching stitching holes: amzn.to/35snEhj
Edge beveler: amzn.to/3bliXtr
Gum tragacanth to burnish edges: amzn.to/39a62ri
Round knife I used before I made my own: amzn.to/39iw7o9
Wing divider: amzn.to/3nt77jd
Rawhide mallet: amzn.to/2MSCkjr
Strap cutter: amzn.to/3q6aluU
Barge contact cement: amzn.to/35Hylgb
A more respiratory friendly glue: amzn.to/3bpsJuv
Basting tape: amzn.to/39kVFRw
I am always working on building something and try to average a KZfaq video once a week. Most often they are about leather work, but I have also posted videos on black smithing, knife making, casting, and even how I make soap. Be sure to Subscribe if you are interested in any of these topics, or just making things in general.