BRAIDING POTTERY!! 5 Unique Rims to Make Using Braiding Techniques!

Рет қаралды 8,970

6 ай бұрын

When you are having a creative block - try a new rim idea! Here are 5 Amazing Rims for your pots using a unique braiding technique. Ann steps you through her design and construction process to build these beautiful pots. Enjoy friends!
Answers to questions we get all the time:
We typically bisque to Cone 04 and fire to Cone 5-6
Ann uses Standard English Porcelain no. 365 unless specified otherwise in the video
Here is a link to Ann's White Liner Glaze: imgur.com/a/w8PP8Gy
If you would like to learn how Ann paints with underglazes - check out her Video Workshop Series. These workshops are very detailed (typically 1.5 - 2 hours in length) where Ann provides step by step instruction and are designed to help potters take their work to new levels of craftsmanship and artistry. vimeo.com/showcase/6725318
If you would like to BECOME A MEMBER of the the LSP Research Facility team and earn a cool title that you can put on your resume, we invite you to hit the "SUPER THANKS" button or the "Buy Ann a Coffee" button to help us unite the world through pottery. We so appreciate how generous you have been - THANK YOU!!!
Links to some of the tools Ann uses:
Hand Extruder: amzn.to/3soifWK
Polymer Clay: amzn.to/3DNpnyd
Loop Carving Tool: amzn.to/42jo1W6
Pottery Tott Aprons (Love These!) : amzn.to/3LznhXz
Laser Level (We just got one - cool!): amzn.to/40y9Lsc
Plastic Pastry Mat: amzn.to/430oTjI
Sugarbelle Icing Bottles: amzn.to/3VPslup
Needle Point Tracing Wheel: amzn.to/3LRrtkB
Banding Wheel I use: amzn.to/3KssUXc
Diamondcore Tools: diamondcoretools.com/
LINK TO ATOMIZER: amzn.to/3eA5mT2
Styrofoam Bowl Mold: amzn.to/39KoL0U
Painters Trim Guard: amzn.to/39C5TAX
Hole Punchers: amzn.to/3JutWyu
Brushes Ann Uses: amzn.to/3SqfZGk
Xiem Tools X-Bevel Bevel Cutter for Pottery and Ceramics:
amzn.to/3rZnmKi
ProPlus Sponge: amzn.to/3zkVy64
Best Red Ribs: amzn.to/3nEoQda
Good Cheap level Tool: amzn.to/3lT8MnE
The Cameras we use: amzn.to/3JJfGCd
Best Cheap Lens we film with: amzn.to/3I6Eljy
Best Good Lens we film with: amzn.to/3s1NuUW
All of our music is LEGALLY LICENSED!

Пікірлер: 39

@madmonkeystudio-ajourneyin3220 5 ай бұрын

No 2! Without a doubt! But throwing a taller rim seems efficient!

@denisenoble4010 4 ай бұрын

Nice ideas again thankyou wanna, I loved the braided version. Even watching and listening, I found it the most complicated to do, in my head, however looking at the finished piece, found it to be the prettiest. Thankyou for sharing your ideas and you talent of making things look so easy to do x😊

@denisenoble4010 6 ай бұрын

To be honest I wasn't sure I'd like any of them but by the time they were complete with glaze I had a problem choosing as they Al turned out beautifully. The blue and white was pretty, the one where you extended the leaves under the red band in liked too. The bride at the top of the last looked different once completed so from starting each piece I went from I'm not sure to wow, Ann's done it again. Thankyou for sharing the process x

@annruel1982 6 ай бұрын

Hey Denise. Im so glad I changed your mind. Thanks as always for watching and I appreciate hearing what you think.

@Mariede425 6 ай бұрын

Oh, my absolute favorite was the last one...the braided rim! that is absolutely AWESOME thank you!!!

@annruel1982 6 ай бұрын

Hi Marie. Thank you so much. I learned that throwing the arms so they are a bit thicker and then cutting strips that are on the thinner side make the tighter braid. Give it a go!

@melddp 6 ай бұрын

Love the second braided rim!

@annruel1982 6 ай бұрын

Hi Mel. Thanks so much!! It was so easy too . Just cut and fold. Give it a go

@chloeuntrau4588 6 ай бұрын

The "grass"is my favorite!

@annruel1982 6 ай бұрын

Thanks Chloe. I folded the strips over the rim and attached them. I carved the band and the bottom part of the grasses into the clay then drew and painted the chickadees. I couldnt resist as those strips looked so much like grasses to me, haha.

@grafkimber 6 ай бұрын

Very beautiful job Ann. Very playful. I love watchin your imagination at work. Great job.🥰

@annruel1982 6 ай бұрын

Hi Kim. that is so nice of you. thanks so much for the kind words and for watching. 🙂

@carolynmurray2501 Ай бұрын

The chickadee ❤️❤️❤️❤️

@mainacht3509 6 ай бұрын

Love all the creative designs esp the last 2. The rims are wonderful but so are your designs and drawings underneath to make the entire composition.

@annruel1982 6 ай бұрын

Hi Mai. That is such a nice thing to say. The great thing about these pieces are that once you create the rim, then you can be as creative with the rest of the piece. I was trying to come up with different designs and techniques for you to hopefully spark your imagination on things you can do with your own pottery.

@sonjaduplessis7315 3 ай бұрын

Hello Ann, these pot are beautiful. Thanks for the tutorial 💕

@easterazali9237 6 ай бұрын

I love all of them 🥰 You’re not just a potter Anne , but a very gifted artist ! 💖

@user-ih1lp4vn3s 6 ай бұрын

You’re so so clever😮

@annruel1982 6 ай бұрын

Aww...that is so kind of you. thanks so much for watching.

@janitahall-swadley8169 6 ай бұрын

Incredibly creative!! I am always wondering about what to do with my rims. All five were awesome, but I think I like the last rim (the thicker braided rim) the best.

@annruel1982 6 ай бұрын

Hi Janita! Thanks so much. It is really an exercise to get people to think outside the box a little. I tried quite a few variations and came upon making that braid. It was fun and I learned a lot too 🙂. Give it a go!

@embee7434 6 ай бұрын

Your videos are like an encouraging hug to start my Saturdays (when I mostly WANT to lay in bed with the covers up over my head). An injection of awe and inspiration gives me a better chance of making it into my studio. I loved all of these rims. I really like the soft appearance of the 'bowtie'. Question if you're inclined to share: how much added time did these take, and how do you modify pricing based on the added effort (if you do)?

@annruel1982 6 ай бұрын

Hugs to you Em!! You know Jim and I appreciate you watching. As far as pricing goes, it is all relative, right. As a potter, you know we never get paid according to the time we put into each piece we make. Therefore, you just need to decide what you are comfortable in charging...taking into account your sales venue, your customers and what you feel they are worth. One tip, always start with a higher price. You can always discount the price later and have a sale if it doesnt sell but it is more difficult to raise prices.

@micheledickey4066 6 ай бұрын

You amaze me. I had so many ideas while watching this! Thanks as always!!!

@LittleStreetPottery 6 ай бұрын

I'm so glad!

@candystamping4552 6 ай бұрын

Awesome as always, and so creative, Ann! I think #2 is gorgeous! I also really like #1 and #2 😊

@annruel1982 6 ай бұрын

You are very sweet Candy. I really appreciate you watching and all of your support. Thank you.

@LittleStreetPottery 6 ай бұрын

I said "Candy is very sweet...huh huh"

@annruel1982 6 ай бұрын

@@LittleStreetPottery Hahahaha!

@Gingy50 6 ай бұрын

I have tried and tried to find the Trimming Spinner from the uk I could only find one similar but very bendy not the quality of the one you use Ann. Love all the things you and Jim show us and the different ways to use clay and clay tools thanks so much xx

@annruel1982 6 ай бұрын

Hey Gingy. Jim and I always appreciate you watching. Thank you. Im sorry you arent finding a trimming spinner like the one I use. Actually in one of my videos where I used cheap tools to do the decorating, I show you how to make your own simple version of the tool

@marisamoralesbaeza9299 2 ай бұрын

Muy original

@emmapuppylover3051 4 ай бұрын

❤❤❤❤❤❤❤

@lalichkhaidze486 6 ай бұрын

❤🙏

@annruel1982 6 ай бұрын

Thanks so much!! We appreciate you watching.

@michellev3918 6 ай бұрын

Beautiful work! These are so creative! I have a question though: why didn't you need to score and slip these to get them to attach? Still trying to figure out when I need to score and slip, or when I don't need to. Thanks!

@LittleStreetPottery 6 ай бұрын

Well. sometimes we skip through that in production but really you should score and slip 93% of the time. If you have surfaces that are still pretty wet and not weight bearing then you can get away with skipping it. However, I know lots of potters who dont even slip and score handles for instance and have no problem with them staying attached...

@TariHuffaker 6 ай бұрын

you are so patient. This is all just too fiddly for me. But they look nice.

@annruel1982 6 ай бұрын

Hey Tari. They d take a little bit of time, but I didnt feel that it was as fiddly as you might think. Give them a go and let me know what you think. 🙂