Bricklaying P.o.v

Рет қаралды 71,386

Charlie Collison

2 жыл бұрын

#bricklaying #vlogging #newbuild

Пікірлер: 100

@emayer1000 Жыл бұрын

I’m a 65 yr old bricklayer from Vancouver Canada. I retire when I was 61 because had to have knee replacement surgery. Love watching the young mens brikie videos. Keep them coming.

@judgiethebudgie 2 жыл бұрын

This felt like one of the original videos from back in the day. Great to see the POV back. None of the timelapses. Nice just to be able to sit, watch and learn. Thanks Charlie for all your uploads. I'm sure it can't be enjoyable some days to have to chuck out a video after a day's work. It's very much appreciated though. Thanks a million!

@garycooper227 2 жыл бұрын

Charlie im a carpenter I had a accident and fell off a roof and broke my back watching you helps me get though the day keep up the good work

@stephenross1581 2 жыл бұрын

Try and keep up the positive thoughts Gary, I’m something similar and can not really work anymore, at first I sat feeling sorry for myself, that caused major depression, it went from bad to worse, the more I sat about the unfitter I got the more I got depressed, Once I admit I had a problem things started to get better, it took years but I’m still here, happy and with a loving family, I wish you the best Gary and like you think Charlie is great therapy, keep smiling buddy 🤞🤞🤞

@westham9208 2 жыл бұрын

Keep going mate 👍

@willbee6785 2 жыл бұрын

Fight back for yourself, your the only one that can do it. Many years back. I fell about 18 feet onto the concrete slab. It hurt badly, but was lucky if I can say that. I’m eternally grateful to Paddy who bent down the high tensile concrete starting bars that I fell upon. All my PPE were damaged or broken. If I can do it, you can. 🔨🪚💪🏻👍

@stecunningham8035 2 жыл бұрын

Speedy recovery pal..

@davebarrow2194 2 жыл бұрын

Stay strong bud👍💥

@FreerSelf 2 жыл бұрын

I've been doing that bumping line in 20mil using thickness of line block on profiles for 25years my friend... taught many blokes amazing little bit helps Charlie's already efficient craft... carry on!

@Madmancrock 2 жыл бұрын

Ex Hod Carrier here.... Ibstock bricks HAVE to be mixed.... When your bucket boy bumps out make him mix 3 packs at a time or you end up with face work that looks shit and patchy...

@PavanaBuild Жыл бұрын

Same thing I do on quoin corners with a 10mm overhand, sellotape 5 slip ties together, one for each foot of the profile so it’s set off the brickwork 10mm. Then put a weep hole either side of the line runner to push it back true with the existing face work, then simply pop the weeps out at the end of each run

@AnacesardaLuz26daLuz77 Ай бұрын

César 🧔🏻💪

@bigdave6002 2 жыл бұрын

Quality work top man

@JackGashRawandUncut 2 жыл бұрын

Lovely wildlife in the background. Wicked video mate always a good watch and feels realistic to the trade 👍

@stevesavage1712 Жыл бұрын

im done with this work retired,lisening to the trowel and all the other sounds is really relaxing to me keep on rockin, amy your unreal,keep plugging away things get easier in time,from winnipeg ,canada ok eh! mate

@leedavies3629 2 жыл бұрын

That’s a nice brick and feature cheers Charlie 80 k well done 🙂✌️

@robbieroche6779 2 жыл бұрын

great idea with the fits brick 20 ml spacer now just get some 20 mil and odd sizes in magnetic form then u dont loose it or them 🤘🤘🤘

@richardfitzgerald4812 2 жыл бұрын

I would love to take the praise for that trick but I can't my old Man showed me that many years ago. This is what it's all about sharing knowledge with other. Bricklayers hopefully making each others lives easier and earning a few more quid on the way.

@grahamebennett2620 2 жыл бұрын

Hi Richard and Charlie. When are the Blake dori going to be available,?

@richardfitzgerald4812 2 жыл бұрын

@@grahamebennett2620 Hello Grahame they are being manufactured. Because I will only produce them in Factory's in the uk unfortunately because of materials shortages I can't give a precise date all I can say is as soon as the Factory's recieve the materials I will have them.

@grahamebennett2620 2 жыл бұрын

@@richardfitzgerald4812 cool.

@martineleven8179 2 жыл бұрын

That's livin alright.

@insightfulminds9037 2 жыл бұрын

Legend.

@insightfulminds9037 2 жыл бұрын

Top vid as ever brother.. #apprentice

@CharlieCollison 2 жыл бұрын

Cheers mate

@robbieroche6779 2 жыл бұрын

i personaly like the step in out on garden walls but i feel they gather algy and water stains far to quick for todays weather great work laying them mate but not my first choice i pick clean brick work over algy catchers any day but your just following the plans i know

@jeffgreer5040 2 жыл бұрын

You can also turn masonry pencil sideways same width as lineblock

@edwardshallow3353 2 жыл бұрын

6 months.brill videos.look forward to them everyday!!!

@avemariaonelectricguitar 2 жыл бұрын

It's more efficient to cut the number of size bricks you need once. Also works better.

@markknott6477 2 жыл бұрын

It’s the little things in life that we appreciate more, ie that 20mm bit of wood on them profiles really saved the hassle of resetting it. Fair play Richard for giving you the heads up 👍. Anyway another therapeutic laying of the bricks like the rain 👍👍😄

@jbigs6210 2 жыл бұрын

Watched both

@mattalford389 2 жыл бұрын

The 20mm bit of wood for corbelling is an old trick, very handy. Makes life easy doesn't it?

@dazdavies581 2 жыл бұрын

Charlie my brother I saw the new trowel holder last night looks good for the last 20 years of my career I was employed as a trouble shooter plus problem sorter out on sites let's run this by you get some 4 inch damp buy a magnet enclose the magnet in a pocket of dpc get a cheap tape measure take off the belt clip fix it to the doc and bobs your uncle love to your family daz ex brickie

@Nikki-fe9ww Жыл бұрын

My dream job

@sen5908 2 жыл бұрын

Charlie have all semi detached got cavity walls between the houses now , if so is that for noise between the propertys , ours is solid 9" and it's terrible

@chriss9767 2 жыл бұрын

Use a 20mm packer then it will be exact. I watched your first video, to answer your question from the first video but never comment. Great channel

@josephlakin6807 2 жыл бұрын

How come you don’t use a marshalltown trowel is it so you can cut your bricks with the trowel ?

@fergusmckee 2 жыл бұрын

Do you put insulation in cavities, I see some with some without and how can you get it in when there’s brick ties?

@jaimewilson1011 2 жыл бұрын

I'm a ground worker Charlie and IV noticed when u go backwards u pick and dip is that easier

@lmilne4859 2 жыл бұрын

Sterling job bigman. 👍🏻

@benfeeney401 2 жыл бұрын

Charlie does that go all the way up like that with them bricks a few stuck out then in again

@irjoker1436 2 жыл бұрын

does pick and dip not leave lots of snots?

@ITSYABOY994 2 жыл бұрын

Yesssssssss 👌🏻

@brookbell5904 2 жыл бұрын

Get the fella on the channel

@joroyle8108 2 жыл бұрын

Some big perks there charlie

@davebarrow2194 2 жыл бұрын

All perks of the job mate

@joroyle8108 2 жыл бұрын

@@davebarrow2194 lol

@TheWanderingMason 2 жыл бұрын

Aw mate that day was so annoying lol, I only managed to lay 3 flag stones 😵

@joeclaxton3598 2 жыл бұрын

Some boy you please get them jumpers online ASAP need them in my life

@shaunroberts-downing3815 2 жыл бұрын

sweet

@deanhoughton4387 2 жыл бұрын

Enjoy ur videos!!! You doing collision merch??

@martinpower6254 2 жыл бұрын

Stop slacking Harry 😂😂😂😂

@jameson566 2 жыл бұрын

Do the insulation dry out after it's wet?

@james7721 2 жыл бұрын

Any advice on how to get price work on site Charlie.

@russellhopkins3178 2 жыл бұрын

Any news on the new Blake’s corner blocks yet ??

@ezaruljalil1762 2 жыл бұрын

What happens to the cement that comes out from the inside?

@themechanicdrredewaan5916 2 жыл бұрын

what is the ratio for the mortar mix ?

@user-up9ki5dx6c 2 жыл бұрын

what belt do you use?

@anthonywilliamson915 2 жыл бұрын

Harrys on the Night Shift lol

@richas5421 2 жыл бұрын

Do a diff type of POV

@jbigs6210 2 жыл бұрын

Prefer head cam stuff

@damon8583 2 жыл бұрын

Hi Charlie love the videos good to watch a pro in action im an apprentice bricklayer at the moment but just getting used for cheap labour I don't really know what to do have you got any advice keep up the good work

@alexk8719 2 жыл бұрын

that's no pro mate

@floazawood Жыл бұрын

Link to the head mount you used?

@themechanicdrredewaan5916 2 жыл бұрын

size of the purb?

@needaman66 2 жыл бұрын

Why was that bed so thick?

@bradleyrowand8307 2 жыл бұрын

Again

@nathiano4997 2 жыл бұрын

Been doing that with some bits of wood for bloody donkey years Char 😂😂 1 thing I've known before you 😂😂😂😂

@patrickmccabe8532 2 жыл бұрын

Love watching the channel even doe im a chippy just thinking out loud would it be worth putting a clamp on the timber packer on profile with more than one person on same line pulling on the line might lead to the packer falling off witch would do my head in keep up the good work lad

@edwardshallow3353 2 жыл бұрын

2 vids in 1 day yup yup

@jhutch2739 2 жыл бұрын

Ofset line clips for Blake’s

@robessell 2 жыл бұрын

Serious lacking the spade trowel mate, I love mine. My only quibble is that the handle is a little long 👍🏻

@Ashley-ml6xe 2 жыл бұрын

Hiya Charlie do you think brickwork level 3 is worth it I finished level 2 last year and I’ve just started back to college for level 3. Got a lot to learn from site so I can do it by my self go college one a week any idea should I go or shouldn’t I thank you

@wumpty93 2 жыл бұрын

Nope. Waste of time, unless you plan to go into site management. Otherwise fuck that off and stick with your level 2

@willbee6785 2 жыл бұрын

Go. No question. Your career could if you push it, develop over time. The world evolves over time, just like you.

@TheAsa1972 2 жыл бұрын

the faces will blow on the out stepped bricks ,Wrong bricks

@TheAsa1972 2 жыл бұрын

@@martin2466 Not Hard enough the water will lie on the lip and freeze then blow the fronts off ,Unless they put a Fillet on them, go back and have a look in 10 years . 20 mil is quite a lip

@63flight 2 жыл бұрын

That's how we did Quoin corners, but we just used a wooden line block as the spacer for the line. 👍👍

@larry6518 2 жыл бұрын

13.00 putting a brick in without a joint hilarious how do you get away with it bro

@MrCharlan1 2 жыл бұрын

Well he filled it in after you prick?🤣 he didn’t leave it like that

@larry6518 2 жыл бұрын

@@MrCharlan1 yehaaaaaa

@robogamer5384 2 жыл бұрын

Larry if you could build the brickwork detail charlie is building ,any better hats off to you mate, if not you must be another keyboard warrior plenty off people can slag charlie off but can't build themselves, onwards and upwards charlie

@mikeocksmall6513 2 жыл бұрын

You’re at it again Larry, show us some of your your work

@larry6518 2 жыл бұрын

@@robogamer5384 since you sound like an adult ill answer you yes and so could plenty of others the keyboard warrior is mcharlin who sounds about 12

@ginoonig4126 2 жыл бұрын

Cool vid but why do I always see the erectile dysfunction ads :(

@royleonardallthingswood9882 2 жыл бұрын

Give me a shout out Charlie. I've got my own channel. Roy Leonard all things wood. I do general building and have learnt a few tips of you. Thanks 😊

@p.maesthetics7154 2 жыл бұрын

Woah is that blue sky's,I thought the UK never sees them ever

@CharlieCollison 2 жыл бұрын

On a rare occasion 😂

@michaelspeed2419 2 жыл бұрын

3 quater brick up side of a window's shite

@tomasdevine7756 2 жыл бұрын

Lol every so called "bricklayer" lays frogs down in Ireland most would not be able to do frogs up it really pisses me off. Did a job with corbles like this 3 brick piers as coins. It corbled more than this we had to use lats with wedges under each one. That ment those under bricks and upper bricks were filled because they had holes. Was a crazy job have a video of it must post it up. Pistols over every window with hidden concrete heads. Elliptical bulls eye.

@lesart1 2 жыл бұрын

i am a brickie in Ireland and doing it for 35 yrs.... and i have always laid bricks with the frog up.... and every brickie i have ever worked with has also... even apprentices do it....

@tomasdevine7756 2 жыл бұрын

@@lesart1 good to hear that, but look around it's frogs down in plenty of sites especially apartment blocks. It boils my blood to see it. Seen lads in Cosgrove in a union with frogs down.

@tomasdevine7756 2 жыл бұрын

Every one I worked with did too but if you didn't you wouldn't be around anyway.

@tomasdevine7756 2 жыл бұрын

@@lesart1 There is frogs down all over the shop. Thankfully you don't but haven't you noticed or what ? Union bricklayers with frogs down ? I can point out heaps of places. Let's be real here...