Brinly Moldboard Plow Assembly and Calibration
Рет қаралды 14,506
Күн бұрынIn this video we assemble and calibrate the Brinly moldboard plow attachment for lawn tractors and UTVs. This video applies to both models PP-510 and PP-510-A.
Product Page: brinly.com/product/pp-51bh_sl...
00:00 - Intro
00:15 - Sleeve Hitch
00:29 - Tools Required
00:57 - Step 1: Assembling the Plow Frame
01:25 - Step 2: Attaching the Crank Handle
02:12 - Step 3: Adding the Hitch Bracket
03:33 - Step 4: Attaching the Plow Bottom and Frog
04:57 - Step 5: Attaching the Plow to the Frame
06:10 - Step 6A: Assembling the Coulter
06:30- Step 6B: Attaching the Coulter Blade
07:43 - Step 7: Attach the Coulter Assembly
08:45 - Operational Tips and Calibration
♫ Music: “Lost Native” by Nat Keefe with The Bow Ties via KZfaq Audio Library ♪
@skoalbanditskoal 6 ай бұрын
You are not plowing with it more like ripping it. The back should be down in the furrow to get the propper roll
@farmallgray Жыл бұрын
Plows have landsides. A landslide is a bunch of dirt sliding downhill.
@williamstuck3066 8 ай бұрын
Disc harrow
@mechanicalmarvel3136 Жыл бұрын
Says adjust so the landside is 1” off the ground, then continues to plow with it approximately 7” off the ground. Can’t even make an instructional video correctly….
@brianphilbrook5262 Жыл бұрын
Says the rear of the plowshare not landslide
@jeremydavis2595 Жыл бұрын
I'm going to make an instruction video on how to set these up once Spring gets here. I use one every year and when set up correctly they do a great job. They are similar to adjusting a 3pt mount plow. I have videos on my channel of it in use.
@carlherrnstein9544 Жыл бұрын
This video is hilarious, watching the lady struggle bolting it together was painful. I bet there was at least 1 bandaid required.
@johnhicks8772 Жыл бұрын
I can make a mess like much cheaper by buying a pig
Brinly Guide to Ground Engaging Attachments: Moldboard Plow, Cultivator, Disc Harrow and Box Scraper
Brinly-Hardy Company
Рет қаралды 8 М.
Стильное с WB⚡️
Рет қаралды 4,3 МЛН