Eibach Pro Truck Lift Kit Step by Step Install

No video

Eibach Pro Truck Lift Kit Step by Step Install - GMC Sierra

Рет қаралды 32,717

5 жыл бұрын

Head over to my Instagram for more pictures of projects:
/ waterfowler_41
In this video I install the EIbach Pro Truck Lift kit on my 2014 GMC Sierra. The kit includes front struts, springs, and rear shocks. This competes with the Bilstein 5100 kit but excels because Eibach provides a new extended spring to increase lift and performance. The kit is 100% bolt on!
The process of installing these struts and shocks is the same regardless of the manufacturer.
Link to Eibach's site to find the kit for your application (E80-23-006-02-22): eibach.com/us/...
Link to Rough Country's sites to find the blocks for your application:
www.roughcount...
Overall very happy with how easy the struts and shocks were to install. On the road the truck behaves much better. For the price, you can't beat the kit.
Like, comment, and subscribe for more content. Thanks for watching!!!!
Coupon Codes
Diode Dynamics/FORM Lighting - Waterfowler41 for free shipping
Truck Trolley - WATERFOWLERFREESHIP for free shipping
Suspensionlifts.com - Waterfowler41 for 5% off
Shifts and Grins - waterfowler41 for 5% off
FitCAM - rfrram150 for 10% off
Brink Wheels - Waterfowler for $100 off your order
Corsa Performance - Waterfowler for 5% off
Jam Handle - Waterfowler41 for 15% off
Magic Brand - Waterfowler41 for 15% off
Lamin-X for 20% off your order, use this link: laminx.refr.cc/...
#chevy #gmc #teameibach #protruck #liftkit #howto

Пікірлер: 197

@guyt29 5 жыл бұрын

VERY NICE JOB ON THIS VIDEO. Nice change of pace to see a well done video. You covered all the important points, got to the point. Well done my man. Looking forward to doing mine

@WaterFowler41 5 жыл бұрын

Guy Trevaskis made my day!!! Thanks!!!!

@JTrump23 4 жыл бұрын

Water Fowler 41 do you have to add the 2” rear blocks Or can it be done without adding it? Planing on getting that same setup without the rear blocks..

@WaterFowler41 4 жыл бұрын

@@JTrump23 I added the rear block because I wanted to retain some of the rake. If you dont add it, you might have a truck that ends up nose high.

@pewtersporty Жыл бұрын

Good job on this.Appreciated this video. Saved me a bit going in knowing what to expect ahead of time. The instructions or lack there of left a lot to assume or figure out. Fyi anyone doing this kit. You do not need to take that bump stop plate off old strut. The piece you have to pop off to get perch off. Do the upper control arms if stamped steel. Either aftermarket or factory aluminum.Typing this while at alignment shop. I will say test drive and drive to shop so far more planted and we’ll tuned to road. Definitely not too stiff staying on the bottom setting.

@gman69455 5 жыл бұрын

Factory shocks are no rebound shocks. They are basically oil filled tubes to control the spring. It wasn’t blown. Still worth the upgrade though. I want to replace my rancho’s with this setup.

@WaterFowler41 5 жыл бұрын

Finesse_Angler the blown shock was leaking oil, the other OEM shock returned to its original length. Rear shock was blown.

@timkontoulas8024 4 жыл бұрын

Great video!!!! I used your tutorial to perform the exact same setup on my 2018 Silverado. Thank you!

@jevonshepherd9214 5 жыл бұрын

I also have a two and a half inch level front end all I need now is to get the rake back and the rear helps with hauling

@WaterFowler41 5 жыл бұрын

Jevon Shepherd I agree 100% for looks the level look is great but from a functional stand point, need that rake

@jaminazarski1746 3 жыл бұрын

Hey man, just wanted to give you a shout out and a big thank you for this video!! I am no mechanic but I was able to do the exact same setup on my 15 silverado using this video and the instructions you posted. Springs were the hardest part obviously but I was able to get it done with minimal help! Thanks again!!

@WaterFowler41 3 жыл бұрын

Awesome, thanks so much!!! The springs in the kit are no joke and it takes some messing around to get them compressed enough to fit the new struts. Glad to hear the video helped!

@donknicker8110 Жыл бұрын

I installed my eibach 2.0s this weekend and the only thing I un hooked was the swaybar link....no need to go through all the extra work

@HenryF05r1 5 жыл бұрын

Thanks for doing this vid, really help out with my install. Impressed with the Eibachs.

@WaterFowler41 5 жыл бұрын

Henry Forcadilla glad I was able to help!!!!

@RCARRacer 3 жыл бұрын

Thank you so much for this video, it's honestly one of the best tutorials out there. Going to be doing my 17 Silverado soon.

@WaterFowler41 3 жыл бұрын

Thank you!

@eugenegutierrez5106 5 жыл бұрын

Nicely done. Those eibach springs are nice and stiff. Installed it on my crossteck. Unfortunately I hired a pro to do it for me. Lol

@bludragontruck9743 3 жыл бұрын

How much was it?

@jcotews 3 жыл бұрын

Thank you for the video!! Cleared a lot of things up!

@WaterFowler41 3 жыл бұрын

Glad it helped!

@eugenegutierrez5106 5 жыл бұрын

If u want better handling and better ride comfort. I’d recommend blisstine shock.

@WaterFowler41 5 жыл бұрын

eugene gutierrez the Eibachs gave me a higher lift than the bilsteins.

@OscyJack- Жыл бұрын

Love that color

@WaterFowler41 9 ай бұрын

It really grew on me when I had the truck

@gregoryc1648 5 жыл бұрын

The website says 1”-3” or lift. So which setting do you have to be on for 2.5” you said the bottom one in the video but it doesn’t match what Eibach is saying

@WaterFowler41 5 жыл бұрын

The instructions are not clear. If you are using the Eibach provided spring (which is longer that stock) the bottom setting will result in 2.5" of lift up front. Lift increase as you go to the higher settings (move the ring up the strut body). If you are NOT using the Eibach springs and reusing your stock springs, the lowest setting I believe retains the stock height. I also believe in this application you can max out at 3" of lift while keeping the OEM springs. All in all, the Eibach spring is longer and it in and of itself provides some lift. Like I said the instructions are confusing and took some monkeying around to figure out exactly what setting I needed. Best to call Eibach and ask them.

@gregoryc1648 5 жыл бұрын

Okay perfect, I plan on getting the new spring and shocks. I will double check with Eibach but what you have said makes sense

@ns671fr 5 жыл бұрын

its not necessarily better than the bilsteins, bilsteins were originally meant to be used with stock coils with adjustable notches. eibachs are similar. but bilsteins are not in the business of making coils, they do shocks. Eibachs does both. I believe the bilstein coils are even made by eibach. Eibach also makes toytec and wheeler's coil springs. they supply the market. bilstein 5100's do sell more though. Eibachs are good as well.

@GirlDad74 5 жыл бұрын

What offset do you have on those wheels? I’m looking at this kit to put a 33x12.50 tire on a 20x10 wheel with -12 offset

@WaterFowler41 5 жыл бұрын

Derek Smith 20 mm

@rocoroco5749 2 күн бұрын

Should of runit at 3rd setting

@abasin08 3 жыл бұрын

Hey bud, why add the block in the rear? Thank you, Rob.

@WaterFowler41 3 жыл бұрын

So I retained some rake when I lifted the front

@abasin08 3 жыл бұрын

I’ve been watching your video a fair bit, thank you it helps for sure! Can I ask what size tires your using on the lift? -Rob

@WaterFowler41 3 жыл бұрын

Hey Rob, the tires on the gmc were Falken at3w 33’s

@traviscobb5347 5 жыл бұрын

How close is the upper control arm to the bump stop? I have Ready lift upper control arms but they are a little bit thicker than stocks and I wasn't wanting to cut off the bump stops. Thanks

@WaterFowler41 5 жыл бұрын

JT C I have about a half inch between UCA and bump stop

@xx-jn3kx 5 жыл бұрын

Great video. How are your ball joint angles? Eibach claims they keep all angles to original spec. Is this true? Thanks

@WaterFowler41 5 жыл бұрын

j b I’m still using OEM UCAs with no issues

@RicsChevys 5 жыл бұрын

Very nice video. Thank you .

@snooka2484 3 жыл бұрын

This was a very informative video. Thanks for this. 😎 It's a shame you know longer have the truck, though. I would have liked to have heard a longterm review. I came across this video while looking for reviews on the bilstein 6112 and leveled Sierras. I'm honestly uncertain now of what to get...6112 or this kit you had. I want to level my new-to-me truck. I had the bilstein 5100 on my previous Sierra, one notch down from the max setting. It still had a rake, but not doing a nosedive like before. For this new Sierra I want it level. Will 1.875 not accomplish that goal? I do not plan to replace the stock block, only replace the shocks ranchos with 5100s. As for tire size, I'd like to fit 275/65/20. I'm not sure if 1.875 will be enough even after using zipties to pull the liner back. If anyone answers, thank you!

@WaterFowler41 3 жыл бұрын

at 1.8" you will not be level which is the biggest and only complaint with the bils systems. Seems 2-2.25" is the best to level these GM trucks which Eibach will be able to net you. As far as bils versus Eibach, the 6112's are 2.5" wide shock bodies so if you are seriously off-roading that would be the way to go since you will avoid oil fatigue. I was very happy with my eibachs having only "really" beat on them a few times. they performed well. I had to replace one of my eibach struts under warranty (internal valving failed) but other than that, the eibachs performed well and I had no complaints.

@snooka2484 3 жыл бұрын

@@WaterFowler41 I ordered this kit. EIB-E80-23-006-02-22 I've tried the hockey puck spacer lift and hated it. Tried bilstein 5100s and was satisfied with the ride, but it was still noticeably lower in the front. And now I'll give these guys a try. According to the eibach website, this kit is meant for 2wd. You installed it though, and according to realtruck.com it fits my 2015 Sierra 4x4. Any thoughts?

@snooka2484 3 жыл бұрын

Actually the more I look onto it it doesn't make sense. All other websites say the same thing, that it fits and works on my truck. Maybe eibach says no because of the UCAs are angled too much and they have no inhouse fix? Should I order some UCAs, and if so which ones would you recommend?

@WaterFowler41 3 жыл бұрын

I’d contact eibach I don’t want to steer you the wrong direction here. I did not replace my UCAs and never had an issue with them.

@snooka2484 3 жыл бұрын

@@WaterFowler41 I need your help with something I'm having trouble with. I got the eibach set put in and everything is looking great and almost operating as it should. What I'm noticing now going over speed bumps is a metal on metal clunk sound coming from the rear. You'd think the truck was separating from the sound of it. Is something loose or are the shocks bottoming out?

@MrSMANCHEZ 5 жыл бұрын

Hey I just got this kit and want to move up to the 3.2” setting. I dont want the ride to be crappy. How stiff is the ride at the height you have?

@WaterFowler41 5 жыл бұрын

My ride at 2.5" is great and completely practical for a daily driver. At 3" or more you're likely to feel the bumps more. Also, you may want to upgrade your upper control arms, your running out of suspension angle running anything over 3" of lift on stock UCA's

@MrSMANCHEZ 5 жыл бұрын

Ya I got some UCA’s and a diff drop already. I might just leave it at stock height with the springs and use a leveling spacer for that extra little bit of lift cause I dont want the ride to be to rough

@christophertilson761 4 жыл бұрын

I can't find this kit. The link in the description doesn't go to the kit. Care to share a direct link where you bought the kit from?

@WaterFowler41 4 жыл бұрын

Here you go: eibach.com/us/2260/E80-23-006-02-22-CHEVROLET-Silverado-1500-pro-truck-lift-system

@tino3898 4 жыл бұрын

Awesome install video man. Anyway, which type of coil springs did you use? Thanks!

@WaterFowler41 4 жыл бұрын

The ones that came with the Eibach kit

@vas1012 5 жыл бұрын

how was the overall install? Contemplating on installing them myself or having a shop do it. Any estimate on what a shop cost would be for install?

@WaterFowler41 5 жыл бұрын

vas1012 I’m not sure what a shop would charge for this but if you’ve never used spring compressors I would probably outsource it to the pros. Here’s my step by step write up. Again if you are comfortable around springs compressors, it’s an easy job but if this will be your first time using them, best you leave it to the pros. www.gm-trucks.com/forums/topic/214698-eibach-pro-truck-lift-kit-installed-step-by-step-of-install/

@gregoryc1648 5 жыл бұрын

I sourced all my parts and the shop I am using quoted me 250-300 for the install.

@bludragontruck9743 3 жыл бұрын

vas1012 what did you end up doing

@bludragontruck9743 3 жыл бұрын

@@gregoryc1648 what did the kit consist of

@matthewgamalski1177 3 жыл бұрын

The video was really great. Thank you for all of the information. One question that I have is, do you need to chance out the U bolts when adding the 2" rear blocks from Rough Country?

@WaterFowler41 3 жыл бұрын

Your supposed to, the kit comes with the new hardware, not sure why you wouldn’t use it. U-bolts do stretch out over time so best to replace when adding the new blocks.

@kirkdunn1379 4 жыл бұрын

Just bcuz shock doesnt rebound doesnt mean its blown, depends on design of shock Not too sure about stiff springs, I was under impression softer spring rate with better dampening in shock is better solution, not other way around Can you choose what spring rate you want with kit or is it std per application ?

@WaterFowler41 4 жыл бұрын

Kirk Dunn no choice on spring rate.

@pet0rrrrr 4 ай бұрын

Hey my front struts are not OEM, and the bottom perch is not removable... do you have any suggestions?

@WaterFowler41 4 ай бұрын

Have you tried searching RockAuto?

@vongillman 5 жыл бұрын

Great video...where did you purchase and what was the cost minus the 2" block. Thank you

@rkl2485 3 жыл бұрын

Great video, but why did you completely skip the assembly of the spring, boot, etc? :(

@WaterFowler41 3 жыл бұрын

Draw the line ont he assembly, remove from the factory strut and reinstall on the Eibachs.

@jagtarthiara2261 5 жыл бұрын

I was really considering this kit, but I’ve been hearing mixed opinions on the ride quality. At your current setup how is your ride? Is it too stiff or is is pretty close to factory ? Much appreciated

@WaterFowler41 5 жыл бұрын

Jagtar Thiara compared to stock, the eibach kit on my truck is great. Nice firm ride.

@jagtarthiara2261 5 жыл бұрын

Water Fowler 41 ok and what setting on the shock are you currently running?

@WaterFowler41 5 жыл бұрын

Jagtar Thiara second ring.

@txpyroguy817 5 жыл бұрын

@@WaterFowler41 I thought you set it at the lowest setting? Did it settle and you had to increase the height and move it to the 2nd ring?

@michaelkula4418 4 жыл бұрын

I am confused as well, did you use the lowest notch for the 2.5" or the second from the bottom.

@walker8989 4 жыл бұрын

Would this look ridiculous running on the lowest setting with 265/65/18's until I could get new rims and tires?

@WaterFowler41 4 жыл бұрын

It might, this is a "big lift" for that small of a tire. 33's is the smallest I would run with a 2.5"+ lift.

@walker8989 4 жыл бұрын

Water Fowler 41 thank you for the reply!

@KennysLyfe 4 жыл бұрын

Good Stuff, I might just consider Eibach instead of Bilstein 5100 after using them (maxed out) for my last truck! Does the truck ride better with Eibach Coilsprings + Lowest Setting Strut OR Maxed Out Strut and Stock Coils? and is it noticeably different? Im not too familiar if these coils are firm or not?

@WaterFowler41 4 жыл бұрын

I never ran the strut maxed out without the Eibach springs so can’t comment on that but compared to stock struts with spacers the truck felt awesome with the Eibach kit.

@Dusty_Bottoms_ Жыл бұрын

I had ther 5100's and stock coils, the Eibach kit rides better & greater travel in the front, so great improvement. Definitely recommend.

@Joesg33 5 жыл бұрын

Would you recommend swapping out UCA for help with alignment and or to create more distance from bump stop? Just bought this for my 18 Silverado, waiting to install because I'm considering UCA upgrade.

@WaterFowler41 5 жыл бұрын

If you have extra $$ then yes! Lifts/levels will wear out stock components eventually, if you can get ahead of the game and replace with a quality UCA then you are ahead of the curve! This way you only need to tear into everything once.

@Joesg33 5 жыл бұрын

@@WaterFowler41 Yea, that's what came to mind. Have you swapped yours and or have you had any issues with the lift if you haven't swapped? The truck is pretty planted and level? Thanks for the info.

@WaterFowler41 5 жыл бұрын

Joe Geiger yup very planted no issues BUT it’s a 2.5” lift on otherwise factory component, eventually something’s gotta give. From a price perspective the rough country UCAs perked my interested but there’s so many other options out there. Gotta start doing my homework.

@Joesg33 5 жыл бұрын

@@WaterFowler41 Ya, that makes since. I've just been reading different forums about some of the ACUs out there rubbing. I'll also do some homework myself. Let me know what ya find brother, thanks again.

@bludragontruck9743 3 жыл бұрын

@@Joesg33 what was your end result

@philalbrecht4647 3 жыл бұрын

Awesome video. Can I ask what spring compressors you used? Maybe I missed it in the video. This will be my first time using compressors. If I leave it to the pros this time, then next time will still be my first time using compressors... Lol

@WaterFowler41 3 жыл бұрын

I hear you, go to your auto parts store and ask for McPherson strut compressors. They look like these: www.autozone.com/test-scan-and-specialty-tools/strut-coil-compressor/oemtools-25550-macpherson-strut-spring-compressor/70135_0_0?spps.s=3181&cmpid=LIA:US:EN:AD:NL:1000000:TLS:71700000060668368&gclid=Cj0KCQiA6t6ABhDMARIsAONIYyzPPWz1kAtqmQxdeFdCU4X-rKnrY5rHDn4rDiuEtcdjvdmlUnSah08aAj--EALw_wcB&gclsrc=aw.ds

@philalbrecht4647 3 жыл бұрын

@@WaterFowler41 Thank you sir! Any other quick tips for compressing the Eibach springs?

@WaterFowler41 3 жыл бұрын

Be patient and don’t rush it, most importantly, have fun!!!

@philalbrecht4647 3 жыл бұрын

@@WaterFowler41 Any chance you know the torque specs for the king nut?

@WaterFowler41 3 жыл бұрын

40 ft lbs I think but you should double check that

@bigchilinsam103 3 жыл бұрын

Great video man! I have to ask, does your washer or how you said, the little plate, make some chain like noise as if it is loose. Because my setup makes a little noise like that.

@WaterFowler41 3 жыл бұрын

Nope it did not, when you install it you need to make sure it’s tapped down all the way. I believe it’s called a jounce cap.

@likuidrano6778 3 жыл бұрын

I installed this on the same year silverado after a year. the passenger side failed, and leaked out all of its oil. I thought eibach were supposed to be quality upgrades. Oem ones hung out 5 years before I switched.

@WaterFowler41 3 жыл бұрын

Eibach has a great warranty, what did their root cause analysis come up when you sent the failed strut in for inspection/replacement?

@fitat40ish 5 жыл бұрын

Hi thank you for answering they were no problems with it? I was looking to buy one thanks

@WaterFowler41 5 жыл бұрын

Cheyanne Piedra nope just like to change things up occasionally.

@Dusty_Bottoms_ Жыл бұрын

Great video, helped me decide to purchase the same kit. Thanks! What size tires & wheel offset are you running?

@WaterFowler41 Жыл бұрын

This was so long ago man I apologize I am not really sure what size tires these were.

@Dusty_Bottoms_ Жыл бұрын

@@WaterFowler41 well, looked good!

@streetglidelover 5 жыл бұрын

So you got 2.5 inches taller in the front?

@WaterFowler41 5 жыл бұрын

chihuahua8209 yes

@bradleyhardesty9873 5 жыл бұрын

Getting this set up next week on 2015 Silverado; do you recommend replacing the upper control arms? I have the cast steel if that matters

@WaterFowler41 5 жыл бұрын

Bradley Hardesty if you have the $$ now it’s definitely worth it. You’ll end up having to replace them down the road anyways since lifts put more stress on control arms, might as well do it while you’re digging into everything.

@bludragontruck9743 3 жыл бұрын

@@WaterFowler41 any issues till this day? Do you have issues with tire wear or your “tow” on the alignment? I want to do this also but I to thought replacing the upper control arm was recommended. Thanks

@WaterFowler41 3 жыл бұрын

I don’t have the truck anymore but never had an issue maintaining alignment. I also had my factory UCAs still and no issues.

@bludragontruck9743 3 жыл бұрын

@@WaterFowler41 thank you for your feedback 👍🏼

@viixiconik 4 жыл бұрын

I already have the bilstein 5100 series with the adjustable strut on the front with OEM springs... My question is can I add the eibach springs with the bilstein 5100 adjustable struts?.

@WaterFowler41 4 жыл бұрын

l Pronox i don’t know if you’ll get much more lift, I believe the bilsteins top out at 1.875” I could be wrong though, best to call bilstein

@connorstringer1876 3 жыл бұрын

I saw your post on GM trucks about the noise you were having with this set up, I have the exact same noise and can’t figure it out. I did the same thing you did with swapping struts and the noise followed. What ended up happening with that? Did Eibach warranty these?

@WaterFowler41 3 жыл бұрын

Yup Eibach replaced the strut, valving issue inside the strut.

@joshuamason3524 3 жыл бұрын

Just purchased a 2018 with this setup and its so bouncy. Any ideas?

@WaterFowler41 3 жыл бұрын

No idea this is a pretty firm kit. Does your truck also have the eibach (silver) springs?

@josegamez3956 4 жыл бұрын

Can I add 2 in spacers to the front struts I want mine at 4-4.5 in lift I have a 2014 Silverado

@WaterFowler41 4 жыл бұрын

Jose Gamez you would need new UCAs and a larger differ drop to accommodate that so your better off getting a real life kit at that point.

@mikeanderson6219 3 жыл бұрын

So how do you like them after a couple years now? I'm about to pull the trigger on this same setup but adding a diff drop and upper arms up front.

@WaterFowler41 3 жыл бұрын

I love them up to when I traded this truck in. The eibachs were awesome!

@mikeanderson6219 3 жыл бұрын

@@WaterFowler41 how long did you have them before you traded it?

@tysonsettle3177 5 жыл бұрын

Great video! Looking seriously at this kit for my build but undecided on rear blocks...stock, 1.5", or 2" as you did. Do you have an Instagram (or other social media) to see more pictures at different angles of your truck?

@WaterFowler41 5 жыл бұрын

Instagram is @waterfowler_41 I posted a pic a few months ago showing the angle of my UCA and CV, let me know if you want any specifics pictures of the assembly.

@bludragontruck9743 3 жыл бұрын

Tyson Settle how’d yours come out? Did you stay stock in the rear or did you decide to change?

@tysonsettle3177 3 жыл бұрын

@@bludragontruck9743 Ended up doing Fox 2.5 coilovers in the front with Dirt King UCA's, and Fox 2.0 shocks and stock height in the rear. Coilovers were installed at the height set from factory, they claim 2.5" height but mine came out to 3". @tysondale84 on Instagram.

@bludragontruck9743 3 жыл бұрын

@@tysonsettle3177 I’m thinking a similar route. Just trying to find the right way, I try short cuts and end up with bad results most of the time.

@bludragontruck9743 3 жыл бұрын

@@tysonsettle3177 what did you end up spending if you don’t mind me asking.

@lwood5375 Жыл бұрын

Did you need to get new upper control arms?

@WaterFowler41 Жыл бұрын

Nope, I never replaced them

@bigboix369 4 жыл бұрын

Quick question are the front springs close to the upper arms I just installed but feel like they are extremely close to the arms

@WaterFowler41 4 жыл бұрын

bigboix369 mine are not but i have the aluminum UCAs. If you have stamped steel they may be close. Make sure everything is clocked correctly I.e. the top mount, spring mount, spring, etc.

@Mr.Beastforpresident 5 жыл бұрын

What brand of rear diff cover is that and where did you purchase it?

@WaterFowler41 5 жыл бұрын

The cover is from PML Inc. Here's my install of it: kzfaq.info/get/bejne/d5acYNSauZuykY0.html

@abasin08 3 жыл бұрын

Hey bud, sorry to bother you, I know you no longer have the truck; I just wanted to ask a another question. Would installing both the factory and new Rough County 2” blocks be a bad thing for the truck/shock?

@WaterFowler41 3 жыл бұрын

I would buy a 3” block from RC. Stacking blocks is a bad idea. A 3” block isn’t that much more than the 2”

@abasin08 3 жыл бұрын

@@WaterFowler41 Thank you, just ordered one. I thought the 2” block would of been manageable, however the Eibach 2.0 coilovers come in set way higher than I expected. Thanks again!

@flakkovxv 3 жыл бұрын

What’s the size of the tire and rim bro?

@WaterFowler41 3 жыл бұрын

Those are 33’s Falken AT3w tires on 20” Fuel Trophy’s

@KC-632H 4 жыл бұрын

How’s the fronts holding up WaterFowler 41 no problems yet🤔

@WaterFowler41 4 жыл бұрын

I had to have one strut replaced under warranty. The internal valves failed. But other wise had them in the truck until I traded them in.

@kevin86670 5 жыл бұрын

My question is?.. does it sit the same height as it did with the previous spacer in front?

@WaterFowler41 5 жыл бұрын

J P’s mix nope, half inch higher in front

@kevin86670 5 жыл бұрын

Water Fowler 41 looks like a sweet setup just wish I could see more angles of truck to help lighten my wallet hehe

@WaterFowler41 5 жыл бұрын

J P’s mix hit up my Instagram, got a bunch of pictures there @waterfowler_41

@FuZioNxREAPER 5 жыл бұрын

I want to do this but I really don’t wanna spend 150 on an alignment😬

@WaterFowler41 5 жыл бұрын

Gotta pay to play my man! Once you start tinkering with the suspension, its time for an alignment.

@FuZioNxREAPER 5 жыл бұрын

Water Fowler 41 yes I know I just did my leveling kit like 2 months ago just don’t wanna get another alignment 2 months later😂😂

@jacobkrueger1920 4 жыл бұрын

I know this video was posted a while ago, but how are these doing for you over a year later? Also, since the spring allows for some lift do you think these are a better option to lift the front 2.5" than putting Bilstein 5100 at max height (2.5") with stock springs?

@WaterFowler41 4 жыл бұрын

Jacob Krueger in my opinion if you are lifting beyond the 1.8” bilsteins can do then yes this is a great option. I had these on my truck up until I traded it in. Hoping there’s a Eibach kit for my Rebel because i was a huge fan of this kit.

@jacobkrueger1920 4 жыл бұрын

@@WaterFowler41 ok thanks for the response. I'll be buying some soon.

@jacobkrueger1920 4 жыл бұрын

@@WaterFowler41 for some reason it's almost $200 cheaper for me to get the Bilstein 5100 shocks and struts and then buy the eibach coils separate. Do you think the Bilsteins paired with the 2.75" eibachs would essentially be the same setup as the eibach kit? I have heard the bilstein 5100 and eibach struts are essentially the same.

@WaterFowler41 4 жыл бұрын

Jacob Krueger bilsteins won’t lift above 1.85” up front.

@jacobkrueger1920 4 жыл бұрын

@@WaterFowler41 but I'm saying if I set them at 0 and use the eibach 2.75" coils. Just like the eibach kit does. Would that be relatively the same you think?

@chrispetersen1423 2 жыл бұрын

I know u don’t have that truck anymore but but which one u like better eibach or bilstein 5100 on ur rebel and what’s the difference?

@WaterFowler41 2 жыл бұрын

Really liked the eibach kit as far as replacements for factory

@chrispetersen1423 2 жыл бұрын

Cuz I’m in the middle of a pick of the eibach or bilstein 5100 for my ram

@WaterFowler41 2 жыл бұрын

Go eibach

@chrispetersen1423 2 жыл бұрын

If I go with eibach E60 27 011 03 10 and set it at 1.8” lift plus I have the off road package with 1” lift from factory will that be a true 2” lift when I use my oe springs

@jacobboucher824 3 жыл бұрын

Do I need the new rear block for the shocks or can I keep it stock?

@WaterFowler41 3 жыл бұрын

You may be a bit noise high without adding a larger rear block.

@ncurc9766 5 жыл бұрын

So you used the springs and the strut clip 2nd notch from the bottom?

@WaterFowler41 5 жыл бұрын

ncurc 97 yup, if I recall correctly, second notching got me to 2.5” lift up front. Any more and you run into upper control arm issues

@ncurc9766 5 жыл бұрын

@@WaterFowler41 thanks for the quick reply, as long as the ride isn't to stiff, I will look into these

@MrSMANCHEZ 5 жыл бұрын

One last question did the coil compressor fit on the eibach spring too and did you rent it?

@WaterFowler41 5 жыл бұрын

I rented a spring compressor from oreilly's. You have to mount the compressors in the highest position because you need to compress the spring about 1.5". I used a pneumatic driver to the compressor shafts. If you've never dealt with spring compressors I wouldn't advise as it can get kind of hairy. The compressor were bending near the end.

@streetglidelover 5 жыл бұрын

How much did you spend on this set up?

@WaterFowler41 5 жыл бұрын

chihuahua8209 at the end of the day with the rough country blocks and alignment about $700

@brianparris7020 3 жыл бұрын

Can 285/75r16 fit on that kit ? Or 305/70r16

@WaterFowler41 3 жыл бұрын

That I do not know. You’ll have to check out the truck groups and see what others have fit

@tranwrx 4 жыл бұрын

How long did it take to settle in??? Because I'm at 3inch still..

@WaterFowler41 4 жыл бұрын

Duy Tran a month or 2 of driving and I was at a “final” height

@tranwrx 4 жыл бұрын

@@WaterFowler41 dam.. a month or 2.. what height you at now?

@WaterFowler41 4 жыл бұрын

Duy Tran last time I measured the truck I was about 2 5/8. Sold the truck back I December so no longer have access to it.

@tranwrx 4 жыл бұрын

@@WaterFowler41 dont blamed you GM made truck like shit.. mine started having alot problems.. and GM Warranty sucks..

@streetglidelover 5 жыл бұрын

How's the ride quality?

@WaterFowler41 5 жыл бұрын

chihuahua8209 truck feels great, planted on the road! Kit had an impressive amount of sway reduction. Definitely a worthwhile upgrade in my opinion.

@streetglidelover 5 жыл бұрын

@@WaterFowler41 I'm getting this kit ,I want front only

@bridger911 5 жыл бұрын

Why would you loosen the tie rod? That was unnecessary

@WaterFowler41 5 жыл бұрын

The Tatted Dad i didn’t loosen it, i popped it out of the hub. Doing this gives you more play to pull the hub assembly down to fit the strut in. I suppose you could leave it attached but I was installing these by myself and wanted all the play I could get.