I made this yesterday for my cheap Aldi Table Saw and am delighted with the outcome. With regards to clamping, I don`t have a long reach clamp so, I cut extra strips of the narrow wood and slotted them into the top space between the faces at 90degs - this enabled me to use my clamps without worrying about them pulling the `face` out of 90deg to the saw bed. Thanks for the vid

Your videos are the very best and I always view them. My table saw sled is dead on thanks to you. I wish you were closer to me as I would love to take your wood working class. Thanks again.

Thank you William for sharing this simple jig. I built it a few weeks ago and already it is indispensable.

Thank you! I’m very glad to see you making videos again, yours are among the very few for which I will stop whatever I’m doing to watch as soon as I receive the notification.

I can't wait to watch this later. I absolutely LOVE your attention to detail. Been so long since you posted videos!

Thank you for the explanation. And welcome back you have been missed by many my self included.

Thank you for your videos. They are very educational and I enjoy your sense of humor and wit!!

I just love your videos, thank you for making us smarter, and better woodworkers 🙏🏼

I thoroughly enjoy your videos. The instruction is clear and accurate, and your projects are beautiful. Your sense of humour is fantastic. Love your work all round.

Mr. Ng is a very good woodworker that knows what he says. He is very precise and great as a teacher. I respect him and what he says.

Outstanding vids William. MUCH appreciated.

I like your sense of humor and all your videos. Thank you for your knowledge and Happy New Year !

Always love your videos! Thank you for sharing!

Good to have you back! I use a lot of composite flooring for table saw jigs. It's very dimensional, durable, slippery, and easy to work. Use plywood and pine to hold stuff together, but I haven't found any affordable alternative that works as well.

OK I'm hooked. Been watching your vids all day. Extremely smart man with a great sense of humor.

Great video William. I appreciate you taking the time

So clear and calm makes it sound a joy to do 👍

Very happy to see you again on making videos! Love them. Happy new year!

Your videos are great and your precision is off the chart!

Just wanted to thank you for posting this. I put it to good use recently when I put 1/2 wood strips around the perimeter of 10 cabinet doors to match some 70 era cabinet doors made with lumbercore plywood with a finger pull edge all the way around. You have made a great contribution to woodworking with your channel. Thanks.

Mr. Ng Yours are the most entertaining and informative videos that I watch here on KZfaq. I look forward to each new video but I also watch whatever pops up, such as this one. I know I’ve seen this one several times and I enjoy it each time. Thank you.

Beautiful work. Love the thought process and methodical attention to detail. Seems like maybe you've done this before!

Great video! Glad to see you back making videos again!

I always enjoy your videos and also your humor. Thanks Blessings

LOVE your subtle teaching style. You are a true treasure William. We wait a looooooooong time for these jewels, but i do better work because of you.

I really love your videos always learn something new, great job.

Excellent work, I really enjoyed watching it.

Perfect, BTW a nice workshop and very clean. greatings from the Netherlands

Awesome! Happy New Year to you my friend!

Good to see you back,, Phil.

as always William, very good and helpful video thanks for posting, from Garry in the UK

I agree with Mr Burke . Another great video William ! Thank you !

You sir are a true craftsman and a fine gentleman. I hope the new year treats you well. :)

I’m going to make my fence tomorrow. Thanks for sharing your experience!

Hello Mr. Ng, you have really opened my mind up to so much more about woodworking. Your videos are very educational, cover so many aspects of operating a great shop and also very entertaining with your smart humor. I hope you are able to post more content as I really enjoy and appreciate your videos. One day I’ll work up the courage to sign up for one of your classes since I’m local. Take care my friend and be safe!

I truly appreciate your attention to detail. Thank you

Great video. I made a new table saw sled using your method, the sled is dead on accurate. Thanks

That was all good information and fantastic workmanship.

Great video! Keep up the good work! Also like the funny remarks "Hand model!"

Wow. Accidental ran across your videos William and subscribed immediately. Had the pleasure of taking one of your classes a good while ago and it really opened my eyes to what was "fine" woodworking. I would highly recommend them to anyone interested in refining whether new or experienced. Glad to see you are doing well. Regards, Philip K.

Great video, I'm looking forward to building one of these for my saw! Thanks!

Another great video. We find that a slight angle on the nail gun when firing nails creates a dovetail effect preventing any risk of nails pulling straight out. Hope that helps.👍

The whole of my shop is about the size of your table saw ! Great tips thanks fr sharing

I made this jig. Works great, nice idea so simple Save a lot of time when moving from the table saw stop to this jig

Another great video. Very good instruction.

The best woodworking instructional videos on the web. And the jig is tops too. Built one for my Unisaw a year ago and it's great.

Great video! Thank you for taking the time to make these videos for us. It is much appreciated! And, you are hilarious 😂 😃

Great video as always Cant wait to see more ....well done

Very nice build and excellent video with clear directions. I especially like the little segment on your Felder Saw. My Delta Unifence rail is almost identical (in shape, at least), so I now have an option for some fence upgrades. The fence is very accurate, but the shape limits the add-ons. Thanks much for the tips. Just subbed your channel. ATB

William....thanks for the HD re-post. HNY

You do make me laugh. Refreshing videos.

Excellent video!

Great video, thanks!

Very clear video. Thanks. :)

Thank you I learn something to day.

I, too, am a hand model when I am not painting homes. I wonder what do you do to keep your hands so soft? Any secrets? Palmolive? Bahhhaaaa!!!! Thanks again for sharing your art!

I like your table saw setup.

Hey Mr. Ng! I really love your videos and love how well you explain things so it's easy to learn! I was wondering what would you do if the fence sides weren't square once you clamp it up with the big clamp and before you nail it?

😆Hand model✋ Thank you for sharing your knowledge and humor. ❤🔨

Thanks so much!

William the Magician. Thanks. PS like your comedy too.

06:31 "and don't you do judgment" jajajajajajajajajjaja you always make me laugh. Greetings from Roma, Italia!!!!

Like your videos. Very Helpful. Also. I was in the Marines with an Ng. Amazing Marine to look up to...Probably no relation to you but found your name as a great Memory...

I enjoyed this video so much that I had to subscribe. Thank you!

Thanks just getting ready to make a cross-cut sled. This will be a nice addtion.

For a guy who measures wood with dial calipers; it is impressive to see you say that a small gap in a glue up "doesn't really matter" when it's a non-functional dimension. I wish more people understood that slop makes life easier when you have the room for it.

you are the Jackie chan of sawdust, love your videos

Great movie! I did it also with nails and realized that im not a pro like you lol! It was not square so i did it again :)

Yay! I love your videos William! Thanks for sharing with us. p.s. I've always thought I could make it in the hand modeling field. Can I get your agents name? :-D

Well done.

That's NgGenius™!

Wonderful

Good job ... for a hand model

Freaking brilliant

William, I very much enjoy each one of your ‘how to’ videos. Always precise. I e learned very much. In this video you made a small reference to cutting the rabbet ( 7/8” x 1/4”) in the fence jig. Is there another video which I ve missed where you provide more detail on its use/application? Thank you.

A Super hand model LOL nice video.

I built this about 7 months ago. I'll never trim edges any other way ever again!

Great videos William. Thank You. How many inches of clamping throat do you need for a 7" tall jig? If the tick mark is 3" up wouldn't 4" or so be enough?

Oh, God!! You are..God!

I find myself frequently mumbling, "That's a good idea!"

Nice Job!!! You sir, are a joy to watch and from which to learn. Question: Why did you cut a rabbit?

Just wanted to wish you a great new year in 2018.

Thank you for your videos William, I like your work and I’m looking forward to building some of your jigs especially the mitre sled & fence jig, I have a question which I’m sure I know the answer but just need you to clarify, the last cut you did on the multi function table saw jig is it to create a chamfer so as to get a perfect reference without out saw dust interference and not quite sure what you did( how much and did you tilt the blade? Thanks Kyle

Idea: One can make a push stick, that hooks over the custom made fence.

Nice work, as always, William. Since I have a Delta Unifence, I adapt differently. Maybe some day I'll change it for a Biesemeyer but after 25+ years I have designed various jigs for my fence that serve me well. Most proud of my simple mortise and tenon jig built from scrap wood and PVC board, except for a pair of hold down clamps. Unrelated to this video - and hope you are still monitoring this - what brand/model is your roll-up extension cord? From various videos you've done, it appears that you have had at least two different ones. I've looked at some big-box products but all have bad reviews and too-low amperage (16- or 18- or 20-ga. cords). I'd want to cover 15-amp circular saws, sanders, etc. that will last a good many years. Thanks.

Nice jig, I will make sure to build one when I get around to finish off my table saw build. I do have one question though, you use the diagonal measure of the fence front / back as the length of the jig and then you added 1/8" for movement, why did you use the diagonal measure and not just the straight length measure? If you add 1/8" to the length for 'slop' then why not just use the real length + slop?

11:05 "♪ Cut the rabbet, Cut the rabbet, ♫ Cut the rabbet! ♪" - Elmer Fudd

About the glue up, do you think a strap clamp around the middle would work if we don’t have deep clamps like yours?

I thought I saw this video two weeks ago!

Anyone know where those deep clamps can be had?

Thank you for your informative video, I know it has been a while since you made the video, I have a question, is your Fence Jig supported on the fence? or is rubbing on the table? my fence is similar to yours, but far end is supported on nylon blocks that run on an angle attached to the Cast iron top.Thank you in advance. Kind regards and keep well Jack Marashlian from OZ

can you / would you use this as an upgrade to the fence that comes with a contractor saw? I have a Rigid contractor saw, I have not been able to justify the expense of a full-size table saw as a beginner woodworker. The fence on my Rigid is not rigid at all and usually, the outfeed end is 1/16" to 1/8" off of the infeed end. any help would be greatly appreciated.

Nice build, where do you get those deep throat clamps? I have been looking for them for pressing inlays in my cutting boards and the deepest I can find are​ 5 1/2. Where did you find them?

My original fence got wet and was not salvageable, I tried to attach an H style fence by screwing self tapping screws into the square tube which gave me a good solid connection but not square. Would you think removing it and building a floating one like this onto a square metal tube only about an 1 1/2 would give enough stability? I'm not sure why you made the dado at the end does it reference from another video?

Instead of making it close to 0.002" the width of the fence, I think better is to make it wider, to 0.02 inch for easier fitting. Cut two 2.5 to 3 inch holes in conjunction with two holddown (or toggle) clamps for clamping. Then it will be a tight fit without the need to limit back and forth movement, due to friction.

When determining the length of you fence, why do you measure your original fence diagonally?

Great job there! Why do you need a groove on the bottom (rabbit) of the front ?

I have a vintage 50s Craftsman contractor table saw. Should I do something to make the original fence wider before I add this?

Question on your table saw sled... Is there any "science" that determines how much sled you allow on the right and left of the blade, or is it purely an arbitrary dimension? Figured I'd ask so i don't have to make another one due to an oversight. Thanks again William!

Happy New Year mate. It may be that I’m a little lost at the moment and I know that all the bits that I checked say that you just now put this up on KZfaq but I am absolutely certain that I just watched this exact video about 10 days ago?? It definitely was this same video lol what are you doing to me William lol ??