How can I contact you? I have some questions and advice PLEASE? I live in South Africa..
@johnmcglynn41029 күн бұрын
Excellent lecture. Detailed in all the right spots. Couldn't thank you more.
@micheljauvin353614 күн бұрын
well explained well done
@robertcartman350216 күн бұрын
I heard "calculate your air" 50 times, until i figured you say "error"
@WilliamTheBot18 күн бұрын
Just works out mathematically. lol
@tripletale20 күн бұрын
Hey William. Just found your channel. I like it very much. To those that criticize your work as being too complicated, don’t worry about them. They’re just frustrated because they can’t understand basic trig. Good job.
@mestreYoda23 күн бұрын
A melhor explicação do KZfaq sobre esses encaixes
@LivingTheLifeRetired25 күн бұрын
I’m a brand new woodworker. Getting to within a thousandth of an inch does not seem achievable at this point. I don’t have fancy gauges to be measuring that precisely.
@joemullan692425 күн бұрын
Sorry but you will always get a bad apple you are doing a great job keep going 👍
@kenday794226 күн бұрын
I found your five cut method very interesting - and now I’m watching the two cut. It doesn’t matter whether your are in it for precision, the hobby or to have fun - somebody presents something and you look at it and decide if you want to use it or not - and leave it at that. people are weird! They must not have a life if they gripe about somebody’s methodology that they can either take her leave anyway.
@patcummins603626 күн бұрын
Sir, it took me two years to find this post of yours! Thank you.
@markburnside353027 күн бұрын
Good job on the jig and video, thanks for not putting up with the Complainer’s! Those who can teach, 8:25 8:25 while those who can’t whine and find fault. Thank You!
@calvinheadley5218Ай бұрын
I can't afford to take another hit! LMAO
@timothygoodman942Ай бұрын
good, but I'd like to see how the sled is put together.
@ajvc2233Ай бұрын
12 years later and this is still the industry standard in making the perfect cross cut sled
@dbcriss21Ай бұрын
Excellent description. I like the what & why of the presentation. And I really appreciate the lack of the lengthy musical introduction so many others use.
@billybike57Ай бұрын
My first box joint will happen this weekend. I’ve wanted to do one but always 🐓 out. I’ve watched this twice, probably once again before and during the box joint. Thanks your explanation was perfect!😊
@andrewengstrom1516Ай бұрын
Remember - it is the insecurity in us that lends credence to the slandering insecurity of others. Slander may hurt, but don't alter your work for them. Give weight to those you respect, and then to those who seem wise, and then to those who are constructive, and then to those who are just positive - and never to a slanderer. They cannot be given any gift or teaching, and silence will not help them either.
@alanralphsonАй бұрын
The fixture is great - but the process was even better. I see I was not the only one who was laughing out loud at the end. Thanks!
@Danvie777Ай бұрын
I really like the way you explain how to sharpen blades. But what is most impressing is that you don’t just give the steps to do so, you also show the possible thoughts in getting to the solution.
@jasonzoddaАй бұрын
You are an incredible teacher. My knives have never been sharper. Thank you for all this knowledge.
@terrypriest6471Ай бұрын
Excellent method for trimming box joint tails. I made this for an old sears craftsman fence. It doesn't have ends, is very narrow. I stacked up multiple copies of the center piece all the way to the top and it works great. I really appreciate showing how to use the dial calipers to get precise results.
@edwardebel1847Ай бұрын
Since most of us have only one table saw (and barely enough space for that) 90% kind of sucks! :-). Thanks for the early morning smile!
@robertrosso-qd6fdАй бұрын
I would like to purchase your push stick...how do I do this?
@ThanhPhan-gq7hi2 ай бұрын
Like your video from Canada
@grassroots93042 ай бұрын
People mad about math don't have enough gray matter to do math. Fun? I'll tell you what's "fun"; not screwing up a project and producing a great product. You could give away solid gold bricks. Someone will bitch that there's no embossing on it. Then you could emboss them and someone will bitch that it has embossing. You can't make people happy. If they can't handle math and straight-forward instruction they can go watch bourbonmoth or whatever. Shame it seems you've not put up a new video in 3 years, if I see things correctly.
@grassroots93042 ай бұрын
Everyone who does woodworking videos has a video on this method of cutting/joining box sides. This, however, is the only video I've seen which covers it in-depth enough to be able to go set up a saw and cut production pieces instead a learning curve on a pile of scrap. Kind of sucks, huh? ;)
@grassroots93042 ай бұрын
Very well done on the job and the video ahooting and production. Nice work!
@jamessanthon77652 ай бұрын
I hope to meet some of you woodturners at the AAW symposium in Portland Oregon May 23 through the 26th 2024.
@danielu17632 ай бұрын
Excellent teacher.
@borincod2 ай бұрын
A more economic, clear and faster approach would be to do the same procedure as the author has shown at 1:22, but instead of cutting across of a board, cut along. The resulting wedge will have longer side, which will magnify the error across its ends. If you don't want to cut along a board, just cut additional wedges like at 1:22 and place them touching each other edge. This will multiply the error accordingly (if you will not make a mistake by flipping wedges in the error-compensation direction).
@josephdimino88902 ай бұрын
Thank you William. I never considered working to such fine tollerances. Exciting.
@rolandshultz48882 ай бұрын
It is a treat to watch you work!
@paulfoster69812 ай бұрын
I found your channel a few years ago and watched every video. I've always wanted to do woodworking but never took the plunge. Over the last year, I've built and helped with a few things; all out of necessity rather than an artistic creation. I'm about to take to dive-in, building out my workshop as tools are being shipped. And so here I am again, rewatching your videos. There is a lot of good content for woodworkers on KZfaq. Much of it is more inspirational. As far as I'm concerned, what you have put out is essential to having a strong foundational knowledge, enabling an aspiring woodworker for growth. Thank you for putting it out and keeping your channel up. I hope to one day see you putting out more content. Even if it's a patreon type of thing, I'd immediately join up. Haven't done anything like that before, but I would, again, immediately jump aboard if you were to.
@JHRefinedCustomFurniture2 ай бұрын
it seems there is a problem with this video. It freezes after 4 seconds
@wakawaka19762 ай бұрын
Grandpa and dad died before I could ask them how they got the sandpaper into these blocks so perfectly…
@wmhfv9922 ай бұрын
Your glee at the end was just wonderful! Love to see it. That plank was a thing of beauty.
@johnwoodhouse32102 ай бұрын
Nasa project😅
@TonyDeJager2 ай бұрын
Great video and instruction, as are all of your videos.
@BruceWSims2 ай бұрын
Your video is the singlemost intelligent one that I have watched, including your rationale for using a dado set over a router. I envy your table saw, set-up. Do you thin k it is possible to pursue the same tolerances using as DeWalt Contractor saw as well. Thoughts?
@bwasman84092 ай бұрын
To do things in later life one cannot pass over what is learned in early life. Avoidance of learning will prevent your functions in later life. Dumbing down of education proves this where all the money in the world does not make it better, but this is the only thing political people have learned.
@rswind19642 ай бұрын
he is funny.... change your blade a couple times... kinda sucks .. dry humor
@terrypriest64712 ай бұрын
This is the most useful, educational KZfaq woodworking video I have ever seen. Thanks for making it.
@frankparsley19133 ай бұрын
Great video. I used your box joint jig a couple of years ago and following your steps, it came out perfect the first try. Thanks for sharing
@steveboone54803 ай бұрын
You are so brilliant and passionate about your work!! I couldn’t even imagine how much your students love you!! I’m subbed!!!
@LesterMolina-hw1fh3 ай бұрын
I thought this was supposed to be easy. My head hurts.
@bayouboyarts3 ай бұрын
More info on how to determine what is the A side on the cut piece, to relate it back to the A side on the guide would be good.
@bayouboyarts3 ай бұрын
I just got to the point where you calculated the error and then used a feeler gauge to shim the miter piece. I said out loud “I’ll be damned”. Math doesn’t scare me but my adhd will sometimes kick in and say “I don’t feel like figuring all that out right now. You rock dude.
@elikintisch10463 ай бұрын
so helpful, thanks!
@Jeff-jg7jh3 ай бұрын
This is the first time I looked up this guy in a few years, but I'm glad to find him again. I liked him right off the first time I watched his vids.