Building a 700WHP DE in 10 Minutes!

Рет қаралды 32,298

4 жыл бұрын

Over the last couple of sleepless days I was able to put my Import Parts Pro built Stage 1 short block together with my cleaned and decked heads with JWT S7 cams. We're almost there!
Want to support the build even more? - doubleasupply.com/
Insta: @Double_A_G35 / double_a_g35
--------------- Mod List ---------------
Greddy Twin Turbo Kit 18G Turbos
Eagle Rods and Wiseco Pistons
Dynasty Billet Girdle
ARP Studs
JWT S7 Camshafts 262 DEG DUR. / .450"(11.43MM) LIFT
Motordyne 5/16ths Plenum Spacer
Motordyne MREV2 Lower Plenum
Ported Lower Intake Manifold from - www.vqboysperformance.com/
Z1 Motorsports Y Pipe
Z1 Motorsports Mid Pipe
Single Exit Greddy Exhaust Muffler
Walbro 485 Fuel Pump
Injector Dynamics 1050cc Injectors
Tuned on E85 Fuel
Greddy Oil Cooler
UPREV Osiris Charizard and Performance Tune
BC Racing Coilovers
Z1 Adjustable Control Arms
Varrstoen ES2 Wheels
DoubleAG35
Aaron Newman
Double_A_G35
DoubleASupply

Пікірлер: 106

@Rev8 4 жыл бұрын

700hp from a VQ is insane lol. Every time your car goes down you just build it back with more power. Amazing for someone who at the start of this was saying how you were new to working on cars. the shit you're doing now is on another level

@noahdboss1195 4 жыл бұрын

so cool to see someone build a badass de in their garage! definitely inspiring me

@ohsaturn9434 4 жыл бұрын

He’s most definitely going to full send this one👀

@dannyquintana388 4 жыл бұрын

Dude I've been watching you since you first started KZfaq. You've came a long way keep it up !

@AaronNewman 4 жыл бұрын

Thank you Danny I see you out here in the comments man! Appreciate that.

@alexisromero3913 4 жыл бұрын

Let's goooo, I'm so happy for you dude I was so sad when your G got crashed but I love how you dont give up and I cant wait for that boost!! You got support all the way in Mexico 🤙🏽🤙🏽

@tonyfrohock8413 4 жыл бұрын

Thanks Aaron, I look forward to your videos every week. This is sick. I have a G35 Skyline 350GT based in UK, your always inspiring me to do stuff to it, mind you this is getting EXTREME.

@coledebeers8693 4 жыл бұрын

That build looking legit bro! Glad to see you using that torque wrench properly 😎

@tony_sd655 4 жыл бұрын

Yes Sir!!! Them Tube Seals are legit. Did the same to mine, so far np. Appreciate it Aaron, cant wait to see it on the Street!!!

@Zspeed 4 жыл бұрын

Aaron, thank you so much for sharing this video, this is a awesome rebuild brother!!!!🏁👍👏

@JoshD4PREZ 4 жыл бұрын

Absolutely brilliant bro I wish I had the knowledge and drive that you have! There are so many parts lol you don’t cut any corners tho, glad to see ya got her all built and clean asf. Notifications are on can’t wait to see when you’re finished!! 🔥🔥

@DOMS4. 4 жыл бұрын

Bruh honestly super happy for you. It's coming out super sick, and you have so much more experience now bro.

@AaronNewman 4 жыл бұрын

Thank you man that means a lot!!

@anthonystheory3869 3 жыл бұрын

I’ve been watching this channel for a long time now 🙏🏼 only guy that gives me hope for my de. This NA life gets boring 😂

@humblegcoupe5608 4 жыл бұрын

Notification gang.. I'm ready for you to bring this beast out to cali!

@miguelmacias2115 4 жыл бұрын

insta saw the intro firsttttt, so proud of you bro🥺 this makes my pistons chime ;-)

@hyperbiker613 4 жыл бұрын

Exactly the route im planning this winter!

@ivannz3370 4 жыл бұрын

That was quick nice job 🔥🤘🏼

@Boosted_Martin 4 жыл бұрын

Damn!!! Can’t wait

@emerrepuntoka 4 жыл бұрын

Cool job man!

@Rts-slots 4 жыл бұрын

Yo this guy Aaron hella funny when he give his production keep the vidz goin

@TheHD1D 4 жыл бұрын

Good shit bro , hopefully this engine stays alive

@tookitooki 2 жыл бұрын

He used a spoon for his pb&j 🤣🤣 love it. Keep up the good work man

@mustansarahmsf9812 4 жыл бұрын

Hella early cant wait to see how this turns out

@mohammedqadwri519 4 жыл бұрын

This is tuff 🔥

@RicardoVega-qf4xj 4 жыл бұрын

More power babyyyy

@HarrodsGarage 4 жыл бұрын

Yes yes and more yes...to the sandwich that is haha PB&J for the win!

@danperez3582 4 жыл бұрын

Looks nice !!! Aaron

@tylercook4194 4 жыл бұрын

Great content! Had me laughin 😂💀

@brynwilliams6770 4 жыл бұрын

Looking good

@xxshorelinexx1812 4 жыл бұрын

Hell yea amigo

@playboyclutches 4 жыл бұрын

NOTIFICATION GANG!

@stealthg35infiniti94 4 жыл бұрын

You're doing a good job! Take your time and do it right the first time...

@SSNELSON 4 жыл бұрын

Dat 🥪 doe 🤣🤣🔥

@enriquecrivera 4 жыл бұрын

The front cover u can paint it with some high temperature clear coat that way it’s easier to clean.

@TehPsychoticGamer 4 жыл бұрын

that timing lapse was nice

@AaronNewman 4 жыл бұрын

Teh

@GioMauriello 3 жыл бұрын

Aaron do be the guy to say “sandwich break” and then make a pb and j on white 😭🖤

@dannymontes5305 4 жыл бұрын

MORE POWAAAAAAAH BABEHHHHHHH

@duomaxwell5807 4 жыл бұрын

Yes broda... hope to see you real soon...I won't be able to keep up but I'll sure try ,💪💪💪 . where the G37 shirts at tho.??

@Jesse_Nolan 4 жыл бұрын

it looks brand new

@funkybunch9971 Жыл бұрын

I want to rebuild my vq35de after it skipped timing chain at 310k abuse. Although after 2mins of watching your video I'm convinced your a rocket scientist like how tf you got the patience? Good job man

@jamesalbright6155 4 жыл бұрын

Yo Aaron ! Wire brush bro!!! They have wire bush heads for the tool u were just using and it works A-1!!! And FAST and doesnt grind the metal :)

@babloo1666 3 жыл бұрын

Perfect tooth floss dance 💃

@ThatHoosierKid17 2 жыл бұрын

Hey Aaron sorry if I missed this in the video but I was wondering how you learned to build motors? Where should one start?

@dannykee9888 4 жыл бұрын

Where are you getting all the info on how to put this beast together? You gotta book? Man, can't WAIT for this thing to fire up!

@juanavilacrespo724 4 жыл бұрын

Nines job!

@tank8418 3 жыл бұрын

You should do a step by step on this rebuild with torque specs as well

@xepher3179 Жыл бұрын

I have a question regarding the cams and all that. Did you just upgrade cams? Like for example did you do anything such as AEM valve springs or valves? I am trying to make a list of what I need but I am unsure if that is required or not.

@NykoNintendo Жыл бұрын

Did you have to get the block resurface and sanded down or just put in new internals on the block without doing any of that?

@youngandballin92 5 ай бұрын

Aren’t the bank 2 secondary cam chain marks supposed to be the oval marks and not the circle marks?

@jedielectro 4 жыл бұрын

polish the front timing cover. with that sweet clean block. your engine will look dope. maybe your top plenium too

@Ace_Gaming3 Жыл бұрын

wich arp head studs did you use ?

@forrestslater7173 4 жыл бұрын

300 likes 0 dislikes we like that

@landenross5424 Ай бұрын

So this is what must be done

@foreverg3549 4 жыл бұрын

yasssssss im waiting on those numbers im tryna b the fastest DE in northern cali NA all the way .... later ill booost it

@humblegcoupe5608 4 жыл бұрын

Once I get everything I've got ordered in and installed we will definitely have to run em

@foreverg3549 4 жыл бұрын

Humble GCoupe bring it out i jus gt off state ref so im ready ro build thanks for not disliking my videos on my channe anymore bro appriciate it fam

@PNWmycologist 10 ай бұрын

Could you link the internal parts list

@cammando117 Жыл бұрын

I need to ask why not get billey oil pump gears

@gemargordon6885 3 жыл бұрын

Where’d you send your block to get built?

@knowitalls8079 2 жыл бұрын

Was that the blippi dance lol

@ZiFlysoHiZ 4 жыл бұрын

Damn this really motivates me to work on my own shit. Im paying someone $1500 to do my timing chains and gallery gaskets cause im scared to do it :// Good shit man

@Strahlendersonnenlicht Жыл бұрын

i would’ve done it for 800

@young2222j 4 жыл бұрын

Is that a stock block de that u build

@luigui707 4 жыл бұрын

I feel you man, Im forced to support right now by hitting the like 😅

@silentfacejames6838 3 жыл бұрын

What piston and rods

@bfrankz3332 4 жыл бұрын

I see lots of sloppy work, but you do a good job. 👍🏼

@christopherschantz1233 Жыл бұрын

Peanut butter jelly and dreams.

@Bernandov 4 жыл бұрын

💪👌🔥💯

@chuck4739 2 жыл бұрын

How long have you been building engines?

@Junkyard_Tony 4 жыл бұрын

Bro quick question the test pipe/down pipes r connected to the headers right?

@numutekwipu2006 4 жыл бұрын

Yes they r 🤓🤠

@AaronNewman 4 жыл бұрын

Yezzir this kit luckily has header manifolds and connect to down pipes to the factory cats

@Turtlefarm 2 жыл бұрын

Pro tip/ use a vacuum below where your drilling

@oliverelizalde 4 жыл бұрын

Fucking legend bro

@puprilla 4 жыл бұрын

Must be a new DE

@Kingchev491 2 жыл бұрын

Bro where are you located I need my VQ Done

@boosted_vq3530 4 жыл бұрын

You should have gotten the block css why it was out

@boostedsamuari7436 4 жыл бұрын

3:02 😂😂😂😭

@bobbyholmes4586 4 жыл бұрын

That short block itself cost 3500 my boy Aaron either got hella deep pockets or hell debt lol shit gonna be so fast, it makes fast car not so fast 😂

@erich2780 4 жыл бұрын

Going to need some more info on those valve cover seals 👀

@AaronNewman 4 жыл бұрын

I made a video on it

@h1k4life71 4 жыл бұрын

Yea... I’ll wait for the numbers

@AaronNewman 4 жыл бұрын

H1k4Life yeah I’m def not gonna push 700 😅

@jackchn23 4 жыл бұрын

Next time just GoonSquad that motor, no torque wrench! Haha, I don’t think these boys own one.

@pierresmith8175 2 жыл бұрын

i dont recommend fucking with the valve seals, if its going take the extra precaution and just replace the entire valve cover

@heaterman3932 Жыл бұрын

How much you spend on build

@zacharydavis9129 2 жыл бұрын

would you recommend someone building an engine that’s never built one before and also doesn’t know much about it?

@AaronNewman 2 жыл бұрын

You gotta start somewhere, that's what I did and I definitely made mistakes but I've learned and moved on. Do as much research and ask as many questions as you can!

@ramonsantamaria685 3 жыл бұрын

How much you pay for engine

@jarrethcruz4562 Жыл бұрын

Bro hate to bother but is there like a walkthrough of everything you need to build your engine really wanna push around 600-700 reliably

@vqslick1180 4 жыл бұрын

And blowing it up in 1

@AaronNewman 4 жыл бұрын

Stahp plz

@getlow8213 Жыл бұрын

Love the video but you messed up with a PB&J. You're supposed to use three slices of bread not two.

@JuanGonzalez-ig9su 3 жыл бұрын

Aaron you still here in Tampa? If you are can you please pm me need to ask you some questions on my build

@AaronNewman 3 жыл бұрын

No I’m in south Florida my insta is @double_a_g35

@addicted1794 4 жыл бұрын

The only thing that triggers me is the valve cover hack job.. might as well buy new OEM covers if you’re already spending so much on the engine lol

@AaronNewman 4 жыл бұрын

😂

@germanmedrano872 Жыл бұрын

Yeah I'm sorry I'm sure its a good video but cant get with the music

@elijahmccartney2545 2 жыл бұрын

“Fat a-“

@cesargonzalez1521 4 жыл бұрын

Should've built an hr

@diytech4u 3 жыл бұрын

no proof its 700hp and more like 5-days work never rush this type of work you noob

@chetphillips1658 Жыл бұрын

SUHHH DOOO